Briggs & Stratton Engine Parts

This is an air filter that fits a variety of small gasoline-powered engines. These engines, which are primarily used as lawn tools, are often exposed to a great amount of lawn dust, dirt, and fine debris. This type of debris can clog the air intake quickly if it is not filtered out. This item is a foam filter, designed specifically to prevent yard waste from clogging the small engine's airflow. Periodically, even the best air filters are subject to so much particulate that they become unusable and need to be replaced. If a small yard tool engine will not start or if it “cycles” fast and slow, detach the air filter housing and start the motor to see if the engine runs properly. If it does start and run, do not use the equipment without a proper air filter. Replacing the air filter is a matter of making certain the engine manifold has cooled, then removing the muffler and air filter housing. The old filter is easily removed and discarded. Reverse the steps to reinstall the air filter. This replacement filter is a genuine OEM manufactured part, guaranteed to meet the same standards as the original part. This filter fits 150 different yard tools that use Briggs & Stratton gasoline engines.

The governor spring controls the flow of fuel from the carburetor to the engine, which controls the throttle of the engine. The spring works by creating tension for the throttle so that the engine speed can be controlled with ease. When the throttle is engaged, the spring is stretched or retracted, controlling the butterfly valve that releases fuel into the engine to generate power. The spring can become stretched over time. In some cases, it is damaged or lost during other repairs. This replacement part only requires a screwdriver and pliers for installation and is sold as an individual part. Be sure to disconnect the spark plug and wear gloves when repairing engine parts. This genuine OEM governor spring replacement part can be used with select models of lawn and garden small engines, including lawn mowers and wood chippers. Compatible with Briggs & Stratton, Cub Cadet, and Lawn Boy. This part is made to exact standards and complies with all required regulations and guidelines to provide safe use in small equipment engines.

Fuel is a crucial component for any gas-powered lawn or garden machine. A full fuel tank replacement can be done relatively quickly with this authentic OEM small engine fuel tank. Made for lawnmowers, pressure washers, generators, wood chippers, and other small engine machines, it includes the full tank and a cap. Any issues with the fuel system will lead to problems with the use of the equipment, and this is true whether it is a cracked or leaking fuel line or a malfunctioning fuel tank. To replace it requires the existing fuel to be fully drained from the tank and fuel system. The spark plug wires must also be disconnected before the original tank is removed. Tools required will include pliers to disconnect lines, screwdrivers to remove the motor housing, and socket wrenches to remove the old tank. Replacing it is simple and means little more than handling the pull cord and reattaching the fuel line once it is replaced. This replacement fuel tank works with a variety of brands, including Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Craftsman, and Simplicity.

This is a screw. A screw is a type of fastener that is used to secure parts together. This particular screw is used for various applications on outdoor power equipment machines.A new screw may be needed if the original is stripped, worn, or otherwise damaged in any way. If the screw is not fastening components together effectively, a new screw may be needed. This part is a genuine Midwest Engine part and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific screw is used on a variety of parts including control covers on snow throwers manufactured by Cub Cadet and MTD. It is also used on the snow hood of Toro snow throwers. This same screw is also used on the muffler guard of Briggs and Stratton engines, Toro snow throwers, Murray snow blowers and snow throwers, Snapper snow throwers, and Simplicity snow throwers.

This genuine Midwest Engine carburetor mixes fuel and air and directs the flow of that mixture into the fuel lines through which the spark plugs are ignited and the lawnmower engine is started.The carburetor of a lawnmower might have to be replaced if it has suffered damage such that it can no longer perform its function, which can result in a stalled or misfiring engine, an engine that will not turn on, or oil leaking directly from it. To test if the problem is the carburetor, pour a tablespoon of oil directly into the carburetor, ignite the engine, and see if the engine starts. If it does not start or it stalls, the carburetor should be immediately removed and replaced. The appliance cannot be used until it has been replaced by this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, and Cub Cadet. This part is sold individually.

This is a genuine carburetor overhaul kit that is manufactured for use on select small engines that are used in lawn and garden equipment. The carburetor is responsible for providing the air and fuel mixture to the engine to help keep it running properly. This assembly is full of gaskets and diaphragms, along with other small parts, that help move the fuel and air, mix them, and then send them into the engine. Over time and with regular use, these parts can become worn, corroded, or lose their seal. This can result in poor performance or stop the engine from running entirely. A replacement with a genuine OEM carburetor overhaul kit is preferred to changing out single parts. Rebuilding the carburetor can bring years of life back to an engine. This OEM kit is manufactured by Briggs & Stratton and is made to exact standards to provide an identical replacement. It can be used in their small engines that are found in lawn and garden machines like blowers, tractors, snowblowers, and lawn mowers. There are more than 150 models that can use this replacement kit. The kit includes all of the gaskets, diaphragms, and other parts to rebuild the carburetor.

This is an air cleaner cartridge produced by Briggs & Stratton and functional in their engines along with those made by Toro, Simplicity, and Snapper. Any air filter is meant to block dirt and debris from passing from the outside of the engine and into the carburetor and engine. It is a powerful filter, made of foam and paper that will capture and pre-filter air necessary for the function of the combustion engine. To make the repair is easy and requires only a screwdriver. Remove the filter cover by removing the screws. Take out the original cartridge and replace it with the new one before returning the cover. This filters ships individually without any additional parts or components.

This part is a replacement air filter. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part can be used to replace a clogged, damaged, or faulty air filter in a variety of lawnmower models. Air filters are important for keeping equipment in good functioning order. They ensure that debris and contaminants are filtered out of the air that enters the engine. Filters need to be cleaned regularly and should be replaced at the point where cleaning is no longer sufficient. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this air filter, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this air filter is suitable for use on several different models of lawnmowers manufactured by Midwest Engines. This is a genuine part made of high-quality, durable materials and is sold individually.

This genuine MTD air filter can be used as a replacement part for the small engine of a log splitter, a lawnmower, or a chipper shredder. The air filter prevents the accumulation of dirt, debris, pebbles, and other particularly small materials within the inner workings of the engine. An air filter should be removed and replaced regularly as a part of routine maintenance. If there is damage to the air filter in the form of rips and tears through which debris can pass, the air filter should be replaced immediately before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This air filter is compatible with the following brands: MTD, Briggs & Stratton, Simplicity, and Cub Cadet. This part is sold individually.

This is a genuine replacement for the camshaft in select Briggs & Stratton engines. The camshaft is found in the crankcase assembly and is designed to help turn the crankshaft to power the engine. This part helps crank the engine and so it is exposed to constant wear and repetitive motion, which can cause it to deteriorate with regular use. It can also break or become damaged due to impact. Without a properly functioning camshaft, the engine will not be able to function, so a failed part must be replaced. This genuine OEM camshaft is manufactured to specific standards and designed to fit select Briggs & Stratton and Toro equipment that has compatible engines. This camshaft includes the part itself along with two metal tappet valves, and is sold as an individual unit. This part is made of durable metal. Other components are sold separately. Allow the engine to cool completely before performing any repairs and always wear gloves to provide hand protection when working on lawn and garden equipment and engines.

The carburetor may need to be replaced if it is clogged, and the engine won’t start or runs rough. This carburetor kit is compatible with Briggs and Stratton and Toro.

This is a genuine replacement fuel tank cap for select Briggs & Stratton engines. It seals the fuel tank to keep the fuel contained and also to create the pressure required to run the fuel system and lead to the combustion process. The fuel cap screws onto the fuel tank and can become worn over time. The cap can also become damaged due to an impact or another incident. In some cases, the cap can get lost or the threads can break or strip entirely. A replacement cap like this one can be the solution for compatible models. This OEM fuel tank cap is manufactured to specific standards by Briggs & Stratton and will fit select models of vertical and industrial engines, including 3.5, 5, 7, 9, and 12.5 HP models. It can also be used on select Toro, Murray, Simplicity, and Snapper models that have a Biggs & Stratton engine and/or fuel tank. The non-vented cap ensures appropriate sealing and fuel containment, and it is made of durable composite plastic material. This fuel tank cap is sold individually. No tools are required to replace this part.

This is a replacement air cleaner cartridge is used to help ensure that dust, dirt, and other debris do not make their way into the carburetor and the engine. The filter is made from pleated paper in a plastic case. The air cleaner cartridge is a filter that is designed to trap debris, which means it inevitably becomes dirty with use. Eventually, it could become clogged or have other issues that would cause problems with the performance of the engine. It should be checked and replaced whenever it is not working to its full capacity, or as a part of regular maintenance. Replacing the filter is simple. Owners will remove the air cleaner cover, remove the old cartridge, replace it with a new one, and then secure the cover. The genuine OEM air cartridge cleaner is sold individually and does not include a foam prefilter. The cleaner is used for lawn mowers and other small engines, and it is compatible with certain models from Briggs & Stratton and Cub Cadet. Owners should always double-check to ensure they are getting the property air cartridge cleaner to work with their small engines.

A diaphragm is made from a durable rubber material and contributes to the function of the carburetor. However, constant heat and fuel exposure can make it stiff and even brittle. When it reaches the end of its lifespan, it will no longer help the carburetor maintain the right amount of fuel before transferring to the engine. If the engine has too much fuel, it will produce an unusual smoke accompanied by uncontrollable revving and vibration. Continuing to use the mower with a broken diaphragm can lead to total engine failure. To replace the worn-down diaphragm, make sure to have a screwdriver and socket set. Installation can take up to 30 minutes. It is recommended to clean the carburetor when replacing the diaphragm. Replace a broken carburetor diaphragm using this genuine Midwest Engine diaphragm. It is compatible with Briggs & Stratton, Toro, and Cub Cadet. It fixes issues like constant engine surging, hard engine starting, and sudden engine shut-down. This brand-new and original Midwest Engine diaphragm is sold individually. Other carburetor parts are sold separately.