Briggs & Stratton Engine Parts

This is a carburetor overhaul kit for those who are working on their carburetor. The carburetor adjusts the balance of air and fuel for the engine. When it is not working correctly, rebuilding the carb is an option, and the elements found in this kit can help with that. The carburetor has a range of parts that help it to function properly. Gaskets could wear out, pins could break, or valves could need to be replaced. If there are issues with any of those parts, it could cause problems, such as air leaking into the engine. Carburetor problems can cause rough running, misfires, and problems getting the engine to start and stay going. This is a genuine OEM replacement part with a range of pieces for the carburetor overhaul. This includes valves and needles, gaskets, springs, and a cotter pin. This overhaul kit is for small engine carburetors and is compatible with brands like Briggs & Stratton, Toro, Cub Cadet, and Simplicity.

Basic lawn and garden machine maintenance indicates that an owner should change air and fuel filters at least once per year, per machine. This air filter cartridge is designed for an array of lawn and garden equipment, including lawn tractors and lawn mowers. This replacement air filter cartridge fits in machines made by Cub Cadet, Toro, Simplicity, Husqvarna and Briggs and Stratton. This is an OEM replacement part sold individually and will require only basic tools, such as a screwdriver or socket set, to remove the casing, take out the old filter, and add the new one. As an important part of the operation of a gas-powered engine, a clean air filter ensures efficient and safe function. This part is sold individually.

This is a genuine OEM air cleaner gasket replacement sourced directly from the manufacturer. This gasket provides the seal between the carburetor and air filter on various lawn and garden engines. The seal is essential to engine performance. If dirty air or too much air gets into the carburetor, the ratio of fuel to air will be off and the engine may misfire, not run at all, or die during operation. Normal use of outdoor machinery will produce wear and tear on the air cleaner gasket that cannot be seen during operation. It isn't until the engine runs badly that the worn gasket is discovered. This is remedied by including the air cleaner gasket in regularly scheduled maintenance. Before changing the air cleaner gasket, make sure the engine is cool. Severe burns can happen if the engine is still hot. Wear gloves while making repairs as an added layer of protection. Remove the air cleaner cover and air filter to access the gasket. Remove the gasket and clean behind the gasket. Install the new gasket, making sure the part is flat. Reinstall the air filter and cover. This air cleaner gasket is sold individually. This gasket is compatible with small engines manufactured by Briggs & Stratton and Cub Cadet.

The primer is used to help circulate fuel to the carburetor, which ensures that the engine starts quickly. Primers can start to wear out over time, which can cause the engine to leak gas or the engine not to start at all. In those cases, it is time to look at the carburetor primer to see if it is properly in place and that it is still in good shape. If there is an issue, it is time to replace it. This genuine OEM replacement carburetor primer part is high-quality and is made to work with lawn mowers and small engines from a range of different brands. These brands include the likes of Craftsman, Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, and Simplicity.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This genuine Midwest Engine air filter cleaner can be used as a replacement part for the small engine of power washers. The purpose of an air filter cleaner for a power washer is to prevent the accumulation of debris, dirt, pebbles, and other such external materials that could be sucked into the engine through the air filter and cause damage to the internal components of the appliance.Air filter cleaners might have to be replaced several times within the regular lifespan of a power washer as a part of routine maintenance. If the air filter cleaner is damaged by the intake of dirt and debris or is otherwise punctured, pierced, ripped, torn, or eroded over time, the air filter cleaner should be removed immediately and replaced with this genuine OEM replacement part before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter cleaner is compatible with the following brands: Midwest Engine, Briggs & Stratton, and Troy-Bilt.

This crankcase gasket is designed to be used in many varieties of lawn and garden equipment. The gasket creates an airtight seal between the crankcase and the cylinder assembly. The crankcase gasket is made from strong composite materials but can wear out, deteriorate, or break as time goes on. When this occurs, other components will no longer have a seal, and the lawn equipment may not work properly.The first step to replacing the crankcase gasket is placing the tool on a flat surface and taking out the spark plug wire. Disassemble the tool to reach the engine, which is where the crankcase gasket will be found. Take apart the engine to reach the crankcase gasket and any other broken parts. Replacing the gasket will require a socket set, a wrench set, and a pair of pliers.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The crankcase gasket is made for use with lawnmowers, snowblowers, and generators manufactured by Simplicity, MTD, Snapper, Cub Cadet, Toro, and Briggs & Stratton.

Here is a genuine replacement carburetor sourced from the manufacturer. It can serve as a replacement for the carburetor that is currently being used in the machine. The carburetor is the part of the machine that mixes the fuel and the air before sending the mixture to the engine. If the carburetor is not working properly, it often means that the mixture will not be correct, or that the engine is not getting enough of the mixture. This will often result in engines that stall out. The carburetor is made from metal and is durable, but it can still start to wear down over time. Parts of the carb could become corroded or break away. In some cases, the carburetor that came with the machine could be faulty and need to be replaced. This authentic OEM replacement carburetor also includes a ring and a gasket. However, it does not come with additional hardware needed for the replacement. The carburetor is compatible with more than 150 models of lawn mowers, pressure washers, generators, and other small engines. It can work with models from Briggs & Stratton, Cub Cadet, and Simplicity.

Almost all small gasoline engines are started by pulling a starter rope, which initiates the compression in the cylinder that fires a spark plug, igniting the air-fuel mixture that starts a small gasoline engine. Starter ropes may become frayed with use and have to be replaced. Replacing the starter rope is not time-consuming. Begin by removing the shroud, the part of the manifold that covers the starter pulley. After removing the old starter rope, insert one end of the new rope into the pulley assembly and tie a knot in it so it won’t slip out of the slot. Then feed the rope into the starter pulley assembly by holding tension on the rope and using a screwdriver to turn the pulley assembly counter-clockwise until it is taut. Hold the pulley in place with the screwdriver to keep the spring from unwinding as you replace the shroud over the assembly. Keeping the tension on the rope, remove the screwdriver. The only thing left is to attach the starter rope to the mower handle. This starter rope is a genuine OEM manufacturer’s replacement part made by Midwest Engine. It is designed to work on most any Briggs & Stratton, Simplicity, Cub Cadet, or Toro made small engine. These engines are used on lawnmowers, chippers, and other small engines. It is sold individually.