Parts for Dacor ER48DSCHLPH: Burner Assembly Parts

An illuminated control knob that replaces a worn or missing knob on compatible cooking appliances. It restores smooth, accurate control and provides a clear, lighted indicator at the knob so settings are easy to confirm.

• Provides the interface to turn and set the control valve or switch
• Integrated light window works with the appliance's lighting circuit to indicate operation
• Direct replacement for cracked, stripped, loose, or missing knobs
• Symptoms include slipping/spinning on the shaft, difficulty adjusting settings, or a damaged knob cap or lens

• Disconnect power to the appliance before servicing; shut off gas supply if applicable
• Pull the old knob straight off the control stem—do not twist the stem
• Align the new knob with the stem and press firmly until fully seated
• If your model uses a lighting lead in the knob, transfer/connect it per the service manual

This service end cap is a chrome-finish replacement trim piece that restores the appliance's finished appearance and protects the exposed end of the control/trim area from dirt and damage. It matches OEM fit and finish for a seamless repair. What it does:

• Covers and protects the exposed end of the control/trim assembly to prevent dirt, moisture, and wear
• Restores the appliance's original appearance where the end cap is cracked, scratched, or missing
• Helps maintain a secure edge on the control/trim area for proper alignment
• Simple cosmetic replacement to improve appearance after panel or control repairs

• One chrome-finish service end cap

• Disconnect power to the appliance before starting any work
• Installation typically involves removing adjacent trim or a few fasteners; handle trim pieces gently to avoid damage
• Align tabs and clips, then press or fasten the end cap into place without forcing

This service pack includes the burner cap and burner ring used on compatible Samsung gas cooktops and ranges. It restores proper gas flow and stable flame by replacing worn or damaged burner top components. What it does

• Replaces the visible burner cap and surrounding burner ring for one cooktop burner
• Helps restore even flame distribution and consistent heating on the affected burner
• Can resolve ignition issues caused by warped or corroded burner tops
• Useful when the burner shows yellow tipping, uneven flame, or poor simmer performance

• One burner cap and one burner ring service pack

• Turn off gas supply and disconnect power before servicing the appliance
• Remove grates and existing burner components, then fit new ring and cap in correct orientation
• Inspect ignition electrode and gas orifice while servicing; clean or replace if needed

This service pack includes the burner cap and burner ring used on compatible Samsung gas cooktops and ranges. It restores proper gas flow and stable flame by replacing worn or damaged burner top components. What it does

• Replaces the visible burner cap and surrounding burner ring for one cooktop burner
• Helps restore even flame distribution and consistent heating on the affected burner
• Can resolve ignition issues caused by warped or corroded burner tops
• Useful when the burner shows yellow tipping, uneven flame, or poor simmer performance

• One burner cap and one burner ring service pack

• Turn off gas supply and disconnect power before servicing the appliance
• Remove grates and existing burner components, then fit new ring and cap in correct orientation
• Inspect ignition electrode and gas orifice while servicing; clean or replace if needed

This burner base assembly replaces the oven's damaged or worn burner base to restore stable combustion and proper heat distribution for gas ranges. It fits original equipment configurations and mounts where the burner connects to the range. What it does:

• Provides the appliance's burner mounting and gas flow interface for ignition
• Helps restore even flame pattern and consistent heating across the burner
• Replaces cracked, warped, or corroded burner bases that cause poor performance
• Can resolve ignition and flame stability issues when base damage is the cause

• Disconnect the appliance from gas and power before servicing.
• Use proper gas-line fittings and check all connections for leaks after installation.
• Inspect surrounding seals and gaskets; replace if damaged to maintain proper operation.

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This side service trim is a factory-style replacement trim piece for the refrigerator door edge that restores appearance and a finished seal area. It helps keep the door edges looking correct and supports proper door closure. What it does:

• Replaces a damaged, cracked or missing side trim piece on the refrigerator door
• Helps maintain a finished edge to prevent snagging and reduce air infiltration at the door seam
• Restores proper part alignment so the door closes and seals as designed
• Matches OEM fit and appearance for a factory-correct repair

• One (1) side service trim piece

• Designed for direct replacement; inspect mounting clips and fasteners and replace if damaged
• Power off and remove food from door area as needed for safe access
• Use caution to avoid scratching adjacent panels during removal/installation
• If trim does not align, verify correct side (left/right) for your door and reference service diagram

This service spill tray replaces a cracked or damaged left-side defrost/drip tray to help contain meltwater and prevent leaks under the refrigerator. It restores proper drainage and protection for the cabinet floor. What it does

• Catches and channels defrost or condensation water away from refrigerator components.
• Helps prevent water pooling and potential floor damage from leaks.
• Restores a secure mounting surface when the original tray is cracked, warped, or missing.
• Matches the left-side tray location and specified 14 x 24 size for a correct fit.

• One service spill tray (left-side, 14 x 24) as shown.

• Disconnect power to the appliance before starting any service work.
• Remove shelves, drawers, or kick plate as needed for access; handle plastic parts gently to avoid damage.
• Verify tray orientation and seating before reassembling; do not force parts into place.

This service spill tray is a molded replacement tray that sits under the appliance to catch and channel small water leaks and drips, helping protect the cabinet and floor from moisture damage. What it does:

• Collects and directs minor water from leaks, condensation, or ice maker/defrost drip
• Prevents water from pooling under the appliance and reaching flooring
• Replaces cracked, warped, or missing trays that allow leaks to spread
• Helps identify and contain source of slow leaks during diagnosis

• One spill tray (center, 14 x 24 in.)

• Disconnect power (and water supply if applicable) before beginning service
• Remove access panels or components as needed to access the tray; keep fasteners for reassembly
• Verify correct orientation and seating of the tray before restoring power
• If tray was damaged by a leak, repair the underlying cause before installing replacement

This replacement spill tray trim restores the black trim piece that surrounds the refrigerator spill/drip area so the interior looks finished and helps channel minor spills away from drawers. Fits the OEM tray opening for a clean seal and appearance. What it does:

• Replaces a cracked, warped or missing spill tray trim that lets spills escape or catch on drawer edges
• Helps direct small food and liquid spills toward the tray for easier cleanup
• Restores proper edge finish so drawers open and close without rubbing
• Prevents debris buildup under the trim that can lead to odors

• High-level: remove the affected drawer or shelf to access the trim; align the trim tabs into the housing and snap into place
• Use gentle pressure to avoid breaking plastic tabs; do not force if resistance is encountered
• Disconnect power only if removal requires moving appliance components that expose electrical parts

Note: Set of 4 pads

This dual burner gasket seals the dual burner assembly to the cooktop surface, keeping spills out and the burner properly supported. Replacing a worn gasket restores a snug fit and consistent, reliable burner operation.

• Creates a tight barrier between the dual burner base and the cooktop
• Helps maintain correct burner height and alignment for stable operation
• Limits liquid and debris intrusion that can cause corrosion or binding
• Common signs: visible cracking/flattening, burner not sitting flush, liquids seeping below, or the burner shifting during use

• Disconnect power and shut off the gas supply; allow the appliance to cool completely
• Remove grates, caps, and burner components to access and remove the old gasket
• Clean mating surfaces before installation; do not stretch or twist the new gasket
• Reassemble and verify the burner sits flat and operates normally

A single service screw used to secure appliance components such as control boards, brackets, and panels. Replaces worn or missing fasteners to restore proper fit and stop parts from shifting. What it does:

• Secures internal components and mounting brackets to prevent movement and vibration
• Holds control boards, panels, or housings in place for reliable operation
• Helps prevent loose parts that can cause rattling or intermittent contact
• Small, OEM-style fastener sized for precision appliance assemblies

• One service screw

• Disconnect power to the appliance before servicing
• Use the correct screwdriver to avoid stripping the head
• Do not overtighten; snug to manufacturer torque or until secure
• Keep removed screws organized to ensure all are returned during reassembly