We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Burner won't light or stay lit? This gas valve controls fuel flow to your cooktop burners. A common fix for ignition issues, moderate DIY repair.
Usually ships within 4 - 14 days
A replacement gas valve that controls gas flow to the oven or range burner, restoring safe ignition and flame regulation so the appliance heats reliably. Designed to match OEM fit and restore proper gas delivery. What it does:
This is a gas valve that controls the flow of gas to a surface burner on a gas range or cooktop. It connects to the burner control knob and regulates the flame from high to low settings. Replace this valve if a burner will not ignite, the flame cannot be adjusted properly, you smell gas when the knob is in the off position, or the knob turns without resistance.
Replace this door switch seal gasket to protect your range's switch assembly from moisture and debris, restoring reliable door detection. Confirm fit with your model.
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.
There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.
Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Replace a cracked, worn, or missing burner orifice spud on your cooktop. This brass fitting controls gas flow to the burner and may need replacement.
Fix weak flames or ignition problems on your gas cooktop. This burner orifice spud controls gas flow for proper flame size and reliable ignition.
Fix uneven flames or incorrect burner heat output with this cooktop burner orifice spud. Controls gas flow to burners for proper flame adjustment.
Burner orifice spud for gas cooktops. This brass fitting installs on the burner assembly to regulate gas flow. Replace if worn or damaged.
Controls and stabilizes gas supply to your cooktop's burner system. Replace if the regulator is damaged, leaking, or failing to maintain proper pressure.
Mounting screw that secures the valve bracket assembly to your cooktop. Replace if screw is stripped, missing, or damaged to ensure proper bracket fit.
Replacement orifice holder for gas cooktops. Secures the gas orifice in place within the burner assembly. Order a new holder if damaged or missing.
Orifice holder for gas cooktops. Secures the gas orifice in place on the burner assembly. Replace if cracked, broken, or missing to ensure proper fit.
Orifice holder for gas cooktops. Secures the burner orifice in place. Replace if cracked, broken, or missing to properly mount the gas orifice component.
Holder ORF for cooktop assembly. Secures components in place during operation. Replace if cracked, broken, or missing to restore proper fitment.
This electrode creates the spark that ignites gas at your cooktop burner. It works with the ignition system to provide reliable flame lighting when you turn on a burner. Replace it if clicking sounds occur but the burner won't light, or if there's no spark at all.
Fix gas burners that won't light or spark intermittently with this igniter electrode wiring harness. Connects electrodes to ignition system for reliable starts.
Fix a gas cooktop burner that won't light or clicks continuously. This surface igniter creates the spark needed for reliable burner ignition.
Burner won't light or ignite? This electrode creates the spark needed to ignite gas burners. Repairs cracked or non-sparking ignitors on gas cooktops.
Fix burner clicking or failure to light with a new surface igniter. Restores reliable spark ignition on gas cooktops and ranges. DIY repair in 15 minutes.
The Clip is an OEM component specifically designed for Whirlpool free-standing electric ranges, securely fastening rack guides, and wire assemblies. This versatile clip features corrosion-resistant anchors and firm spring coils.
Causes of failure involve metal fatigue weakening the spring over years of expansion and contraction during heating, worn surfaces losing grip, or damaged barbs failing to anchor the racks correctly.
Symptoms of a bad cooking rack clip include:
Replace yours today with this genuine OEM Whirlpool clip. Compatible with KitchenAid, Maytag, and Jenn-Air appliances as well, its reinforced coils maintain constant tension for organized baking.
Replace your range burner gasket to seal gaps and prevent gas leaks. Install when worn, cracked, or damaged to ensure safe operation. Verify fit with your model.
Cooktop burner gasket seals the burner assembly to prevent gas leaks and ensure proper combustion. Replace if worn, cracked, or damaged. Confirm fit with your model.