Parts for Frigidaire GCCG3048AB: Burner Parts

This water inlet valve controls the flow of water to the refrigerator's dispenser and ice maker so you get steady water and ice when needed. Replaces a worn or leaking valve to restore proper water delivery. What it does

• Opens and closes to allow water into the ice maker and dispenser when requested
• Helps maintain proper water pressure to dispenser and ice production
• A leaking or stuck valve can cause no water, slow filling, or visible leaks
• Commonly replaced when ice maker won't fill or dispenser has weak/no flow

• Shut off the water supply and unplug the appliance before installing
• Inspect inlet fittings and supply line for damage; replace any worn hoses or clamps
• Tighten fittings to manufacturer torque; check for leaks after restoring water

Replacement mounting bracket that secures internal appliance components to the cabinet or frame, restoring proper alignment and support. Helps reduce rattling and prevents loose or sagging parts for safer, quieter operation. What it does:

• Secures components or assemblies to the appliance frame to maintain proper alignment.
• Reduces movement and vibration that commonly cause rattling or intermittent contact.
• Helps prevent sagging or misalignment of attached parts that can affect operation.
• Simple, passive part — no electrical function.

• Disconnect power (and water, if applicable) before starting any repair.
• Use appropriate hand tools; inspect mounting holes and fasteners for damage or corrosion.
• Replace only the damaged bracket; do not overtighten fasteners to avoid cracking.

This extra-large burner crown replaces the outer decorative cap on a cooktop surface burner, restoring proper flame distribution and cookware support for large pots and pans. Durable finish helps maintain even heating and appearance. What it does:

• Covers and protects the burner head while directing flames for even heating
• Supports large cookware on the cooktop surface
• Can reduce uneven or weak flames caused by a damaged or warped crown
• Restores proper fit and appearance for an extra-large surface burner

• One extra-large burner crown

• Ensure the cooktop is completely cool and gas or power is turned off before starting
• Remove and replace gently to avoid bending the burner head; no special tools usually required
• Follow the appliance manufacturer's instructions and safety guidelines

This large surface burner head mounts on a sealed gas burner and distributes gas through its flame ports. Replace a worn or clogged crown to restore smooth ignition and an even, controllable flame on the large burner. What it does:

• Channels gas through the port ring to create an even flame on the large surface burner
• Works with the igniter for quick, reliable lighting
• Helps correct weak or uneven flames and yellow tipping
• Can resolve delayed ignition or clicking without lighting when ports are obstructed

• 1 large burner crown

• Disconnect power and shut off gas; allow the cooktop/range to cool completely.
• Remove grate and burner cap; lift off the old crown and clean the orifice area and surrounding surface.
• Position the new crown over the burner orifice and igniter; ensure it seats flat and is properly aligned.
• Reinstall the cap and grate; restore gas and power, then test for proper ignition and even flame.

This medium crown burner sits on the gas cooktop/range burner to shape and distribute the flame for even heating. Replacing a worn or damaged crown restores reliable ignition and a consistent flame pattern on the medium-output burner.

• Distributes gas evenly around the burner for steady, uniform heat
• Works with the igniter for reliable lighting when properly seated
• Helps protect burner ports from spills and debris
• Helps with uneven or yellow flames, delayed ignition, inconsistent lighting, or visible cracks/warping

• Disconnect power and shut off gas; allow the surface to cool completely
• Remove the old crown and clean the mating surfaces
• Align the new crown with any locator pins/notches and seat it flat; if screws are present on your model, tighten gently and evenly
• Restore gas/power and test for proper ignition and flame pattern

This is a small crown-style burner cap for a gas cooktop. It sits on top of the matching burner head to distribute flame evenly, protect the burner ports, and provide a finished surface that's easy to clean.

• Covers the burner head to help ensure even flame and proper heat
• Shields burner ports from spills and debris
• Cosmetic top piece; damage or warping can cause poor flame pattern
• Common symptoms: uneven flames, flame lifting, difficulty simmering, or a missing/damaged cap

• Disconnect power and shut off gas before servicing
• Ensure the cooktop and burner are completely cool
• Lift off the old cap and place the new cap centered on the burner head
• Verify the cap sits level; re-seat if flame is uneven after relighting

This hot surface igniter is the heated element that lights the bake burner in gas ovens. It provides a reliable glow to ignite gas so the oven can reach and maintain baking temperatures. What it does

• Heats and glows to ignite the oven's bake burner when the control calls for heat.
• Restores normal oven heating when a failed igniter prevents the burner from lighting.
• Common symptoms: oven won't heat, long preheat times, or bake burner not lighting.
• Works with compatible gas oven systems that use a hot surface ignition method.

• One hot surface igniter assembly (single igniter).

• Turn off power and shut off gas supply before beginning any repair.
• Handle the igniter carefully; the element is brittle and can crack if touched or dropped.
• Verify fit and wiring match your appliance before installation.

This hot surface igniter glows to ignite the oven's bake burner, restoring consistent ignition so your oven can reach and hold the set temperature for baking and roasting. What it does:

• Heats until glowing hot to open the gas valve and ignite the oven bake burner
• Helps the oven reach set temperature and maintain steady baking heat
• Common symptom fixer: oven won't heat or takes too long to reach temperature
• Also used when the oven clicks or cycles without lighting

• Always disconnect power and shut off the gas supply before beginning work
• Avoid touching the ceramic/glowing element; handle by the mounting bracket or connector
• Verify proper wiring connection and secure mounting for reliable operation

A replacement gas pressure regulator that controls incoming burner gas flow to maintain consistent combustion and heat. Restores steady flame performance and helps prevent high or low burner output caused by a faulty regulator. What it does:

• Regulates household gas pressure to the cooktop/oven burners for stable flame and temperature control
• Helps resolve symptoms like uneven burner flames, burners that burn too high or too low, or loss of proper heat
• Works with the appliance's gas valve and manifold to keep gas delivery within safe operating range
• Passive mechanical part — no electrical connections

• Disconnect the appliance from gas supply and electricity before servicing; follow appliance manufacturer's safety instructions
• Use proper gas-approved fittings and a leak test after installation (soap solution or approved gas leak detector)
• Tighten fittings to manufacturer torque specs; do not overtighten or use sealants not rated for gas