Parts for Lg WM3460CW: Cabinet And Control Panel Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This hinge bracket secures the appliance door hinge to the cabinet, restoring correct door alignment and reliable opening/closing. Replace a cracked or bent bracket to stop door sag, rubbing, or uneven sealing. What it does

• Secures the hinge assembly to the cabinet frame so the door mounts firmly and stays aligned.
• Prevents door sag and misalignment that can cause sticking, rubbing, or poor door sealing.
• Restores proper pivoting action for smooth opening and closing.
• Helps maintain correct door position to avoid stress on hinges and surrounding trim.

• Disconnect power to the appliance before starting and remove any items from the door.
• Support the door while removing and installing the bracket to prevent it from dropping.
• Use the correct screwdriver or socket; tighten fasteners snugly but avoid over-torquing.
• If the hinge or mounting hardware is damaged or excessively worn, replace those parts as well for a secure repair.

Inner door frame for front-load washers. Structural component that supports the door glass and gasket. Replace if cracked, warped, or damaged from impact.

This top plate is the replacement interior top panel that protects microwave components and helps direct heat away from the cavity. A firm, exact-fit replacement restores safe operation and prevents food debris from reaching internal parts. What it does:

• Covers and shields internal microwave components from spills, splatters and food debris
• Helps maintain proper cavity surface for even cooking performance
• Replace if the top plate is dented, warped, corroded or has surface damage
• Prevents debris buildup that can cause odors, smoke or arcing when reheating food

• One top plate

• Disconnect power and unplug the appliance before servicing
• Handle edges carefully; metal panels may be sharp
• Verify part alignment and secure all fasteners; do not force-fit

Direct replacement outer cabinet panel for your washer. Restores finished appearance and protects internal components. Replace if cracked, dented, or missing. Verify fit with your model number before ordering.

Replace your broken or cracked laundry center door handle. This exterior handle installs on the front panel for opening and closing the door.

Leveling leg assembly for washers and laundry centers. Installs at the base to support and level the unit. Replace if cracked, broken, or missing.

The washer Hose Retainer Holder Clip is an OEM part that mounts behind the control panel on LG front-loading washers. It positions water supply hoses to prevent kinks or stress that leads to leaks over time. 

Causes of a failed clip include fatigue from years of front-load vibration and damage from any installation or repair work behind the control panel.

Symptoms of an insufficient hose retainer clip include:

• Loose, misrouted, or flopping hoses behind the control panel
• Bulging or kinked hoses that restrict water flow
• Water leaks at hose connections

This OEM replacement clip is compatible with select Kenmore front-loaders.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

If your washer display is blank or unresponsive to touch, this display power control board assembly restores interface lights and button functions.

Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.

Replaces a damaged, melted, or scorched power cord assembly on your washer. Restores safe electrical connection when the original cord is burned or worn.

Front-loading washer door hinge assembly. Secures door opening and closing. Replace if door sags, won't stay closed, or hinge is cracked or damaged.

Secures components in correct position inside your washer. Replace if cracked, broken, or worn to restore proper support and alignment for reliable operation.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

Replacement cover cap for washers. Conceals exposed screw heads and fastener holes for a clean finish. Install when original cap is cracked or missing.

This drain hose cap seals and secures the refrigerator defrost drain outlet so meltwater is directed into the drain hose instead of pooling in the cabinet. Replaces a worn or damaged cap to help stop interior leaks and water buildup. What it does:

• Seals the defrost drain outlet to prevent water from spilling into drawers or onto shelves.
• Guides defrost/meltwater into the drain hose and toward the drain pan.
• Helps reduce odors and pests entering through an open drain opening.
• Fits onto the drain outlet to replace cracked, missing, or loose caps.

• Disconnect power before working inside the refrigerator to avoid electrical hazard.
• Remove shelves and drawers as needed to access the drain outlet; clear any visible debris or ice first.
• Press the cap firmly onto the drain outlet/hose until fully seated; avoid excessive force or prying tools.
• After installation, pour a small amount of warm water down the drain to confirm proper flow and seating.

Control knob assembly for dryer and washer front panels. Replaces cracked, broken, or missing knobs. Restores smooth rotary control for cycle selection.

The PCB Assembly is an OEM part for LG refrigerators. It stands for Printed Circuit Board, which is the main control board that manages and regulates various functions and components within the refrigerator.

Symptoms of a bad PCB Assembly include:

• The refrigerator not powering on or displaying any lights/indicators
• Specific components or features not functioning correctly (ice maker, dispenser, cooling, etc.)
• Error codes or warning lights illuminated on the control panel
• Strange noises or abnormal behavior from the refrigerator

Causes of a bad PCB Assembly can be related to electrical faults, such as short circuits, power surges, or component failures. Physical damage from impact, moisture exposure, or overheating can also contribute to the malfunction of the PCB.

This OEM LG part is also compatible with Sears/Kenmore refrigerators. 

Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.

Fix a washer door that won't close or latch properly. This locker hook engages the lock mechanism to secure the door during cycles and prevent error codes.

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

Shipping bolt assembly secures the washer drum during transport. Replace if bolts are lost, damaged, or missing before moving your washer to prevent damage.

Secures washer drum during moving or transport. Immobilizes internal components to prevent damage. Replace if missing, lost, or needed for relocation.

Washer won't start or shows dE/door lock error? This door switch detects if the door is closed so the cycle can begin. Easy DIY repair with video guide.

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.