Parts for Bosch WAS24460UC/28: Cabinet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This fixing kit supplies the mounting and fastening hardware used to secure appliance components during installation or repair, helping restore proper fit and reduce vibration or loose panels. Ideal for replacing missing or damaged fasteners. What it does

• Provides the specific screws, clips, and brackets used to anchor panels or assemblies
• Stops rattling and vibration caused by loose or missing mounting hardware
• Restores proper alignment of doors, panels, or internal components
• Replaces worn or corroded fasteners that can compromise a secure fit

• Disconnect power and water before beginning any repair work
• Use proper tools and follow the appliance manufacturer's installation instructions
• Inspect surrounding components and mounting surfaces; replace any damaged parts

This replacement foot supports and levels your appliance so it sits steady and operates smoothly. Replace a worn or missing foot to restore proper height, reduce wobble, and help protect surrounding surfaces.

• Supports the base/frame to maintain proper height and alignment
• Provides leveling adjustment so the unit remains stable
• Helps reduce rocking, vibration, and rattling during operation
• Replace if the original foot is cracked, stripped, missing, or won't adjust

• Disconnect power; shut off water or gas supplies if applicable
• Carefully tilt or raise the unit to access the foot location
• Remove the damaged foot and install the new one per design
• Level the appliance front-to-back and side-to-side; verify stability before use

This replacement fixture assembly secures internal components and restores proper alignment and fit in compatible appliances. Replacing a worn or damaged fixture helps stop noise, prevent rubbing, and maintain safe operation. What it does:

• Holds adjacent parts in the correct position to prevent movement and misalignment
• Reduces rattling, vibration, or scraping noises caused by loose or broken supports
• Helps maintain door/panel fit and seals where applicable
• Restores the original mounting function to prevent further wear on connected components

• Disconnect power and water before beginning any repair
• Use basic hand tools; follow service manual or tech sheet for exact disassembly steps
• Handle carefully to avoid damaging surrounding trim, wiring, or seals

The Door Lock Assembly is an OEM part for Bosch washing machines. It secures the washer door during wash cycles. The lock assembly prevents accidental opening of the door while also allowing easy access for loading and unloading once the cycle is complete.

Causes of a bad door lock assembly can include normal wear and tear over extended use, as well as repeated impact or unintentional contact with the lock area during operation which can damage lock components.

Symptoms of a bad door lock assembly include:

• The door not latching or locking properly during wash cycles
• Difficulty fully closing or sealing the door
• Repeated triggering of door open or door lock error messages
• loosening or sagging of the door over time

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This washer door hinge connects the door to the front panel and keeps it aligned for smooth opening/closing and a tight seal. Replace a bent or worn hinge to fix door closure issues and help prevent leaks.

• Connects and pivots the washer door to the cabinet/front panel
• Maintains alignment so the door compresses evenly against the door gasket
• Symptoms of a failing hinge: door sags or rubs, won't close/latch fully, or leaks occur at the front of the washer
• Visible play, cracks, or deformation at the hinge

• Disconnect power and turn off water before servicing
• Support the door; remove hinge screws from the front panel and door, transfer the hinge, and reinstall screws using existing hardware
• After installation, verify door alignment and latch engagement, ensure the gasket seats evenly, and run a short test cycle to check for leaks

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This glass front panel replaces a cracked or damaged outer door surface to restore appearance and protect internal components. It provides the visible exterior surface for the appliance door and keeps the interior sealed from everyday wear. What it does:

• Replaces broken, cracked, or scratched outer door glass to restore the appliance's exterior
• Protects controls and internal layers behind the door from impact and debris
• Restores a smooth, easy-to-clean surface and original appearance
• Helps prevent sharp edges or glass fragments from exposing internal parts

• Handle carefully; wear cut-resistant gloves and eye protection to avoid injury from sharp edges
• Remove power to the appliance before starting any disassembly
• Follow OEM disassembly instructions for removing the door assembly and separating layers—do not force components
• If adhesive or clips are used, replace any damaged fasteners and allow adhesives to cure per manufacturer guidance

Replacement holder that secures internal components and accessories, restoring proper fit and preventing movement or rattling. Direct-fit design replaces a worn, cracked or broken holder to keep parts stable during normal operation. What it does

• Secures panels, racks or small internal components in place to prevent shifting.
• Restores correct alignment when a broken holder allows parts to sag or detach.
• Eliminates rattling or vibration caused by loose or damaged mounts.
• Helps maintain proper operation by keeping components positioned as intended.

• Disconnect power (and water supply if applicable) before starting repair.
• Remove any obstructing panels or accessories to access the holder; keep track of fasteners.
• Install the new holder in the same orientation; snap or fasten it until it seats securely—do not force or overtighten.

Replacement holder that secures internal components and accessories, restoring proper fit and preventing movement or rattling. Direct-fit design replaces a worn, cracked or broken holder to keep parts stable during normal operation. What it does

• Secures panels, racks or small internal components in place to prevent shifting.
• Restores correct alignment when a broken holder allows parts to sag or detach.
• Eliminates rattling or vibration caused by loose or damaged mounts.
• Helps maintain proper operation by keeping components positioned as intended.

• Disconnect power (and water supply if applicable) before starting repair.
• Remove any obstructing panels or accessories to access the holder; keep track of fasteners.
• Install the new holder in the same orientation; snap or fasten it until it seats securely—do not force or overtighten.

Replacement holder that secures internal components and accessories, restoring proper fit and preventing movement or rattling. Direct-fit design replaces a worn, cracked or broken holder to keep parts stable during normal operation. What it does

• Secures panels, racks or small internal components in place to prevent shifting.
• Restores correct alignment when a broken holder allows parts to sag or detach.
• Eliminates rattling or vibration caused by loose or damaged mounts.
• Helps maintain proper operation by keeping components positioned as intended.

• Disconnect power (and water supply if applicable) before starting repair.
• Remove any obstructing panels or accessories to access the holder; keep track of fasteners.
• Install the new holder in the same orientation; snap or fasten it until it seats securely—do not force or overtighten.

Replacement holder that secures internal components and accessories, restoring proper fit and preventing movement or rattling. Direct-fit design replaces a worn, cracked or broken holder to keep parts stable during normal operation. What it does

• Secures panels, racks or small internal components in place to prevent shifting.
• Restores correct alignment when a broken holder allows parts to sag or detach.
• Eliminates rattling or vibration caused by loose or damaged mounts.
• Helps maintain proper operation by keeping components positioned as intended.

• Disconnect power (and water supply if applicable) before starting repair.
• Remove any obstructing panels or accessories to access the holder; keep track of fasteners.
• Install the new holder in the same orientation; snap or fasten it until it seats securely—do not force or overtighten.

This band is a small retaining clamp designed to hold or secure appliance components in place, helping reduce movement and vibration for reliable operation. Use it to replace worn, bent, or missing retaining bands. What it does:

• Secures hoses, tubes, or small assemblies to prevent shifting or disconnects
• Helps reduce rattling and vibration-related noise
• Restores proper alignment of the secured component
• Can prevent intermittent operation caused by loose connections

• Disconnect power and water before beginning any repair
• Inspect the mating surfaces and replace any damaged clips or fasteners
• Use appropriate pliers or a clamp tool to install the band without over-tightening

This is a door and window assembly for washing machines. This assembly includes both the door frame and the glass. This part is what closes and seals the unit so that the washing cycles can run without leaking. Iff the door frame or glass is cracked, if the electric door latch switch fails and the machine won't start, or if the door connection becomes loose and cannot be fixed by another other means, it should be replaced. Unplug the washing machine prior to replacing this assembly.This door and window assembly is compatible with washing machines that are manufactured by the Bosch brand. It is a genuine OEM part that is sourced directly from the manufacturer. It is sold as an individual item.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.