Parts for Bosch WAS24460UC/28: Pump Assembly Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement dispenser tray fits the detergent cup assembly to hold and release dishwasher detergent for normal wash cycles. Restores proper detergent containment and helps ensure detergent is delivered during the wash. What it does

• Holds powdered or tablet detergent in the machine's dispenser area
• Allows detergent to be released at the correct time during the wash cycle
• Replaces cracked, warped, or missing trays that cause leaking or improper release
• Helps prevent detergent from dissolving too early or pooling inside the dispenser

• One dispenser tray

• Disconnect power (and water, if applicable) before servicing for safety
• Remove the old dispenser by opening the door and releasing the dispenser latch; install the new tray by aligning and snapping into place
• Check the dispenser cover and latch operation after installation to ensure proper release

This lower dispenser tray fits inside the dishwasher detergent dispenser and provides a stable catch and guide for detergent and rinse aid, helping the dispenser operate cleanly and reliably. Replaces a cracked or warped tray to reduce leaks and residue buildup. What it does:

• Holds and positions the lower portion of the detergent/dispenser assembly for proper door sealing and release
• Directs detergent and rinse aid into the wash chamber when the dispenser opens
• Helps prevent leaks and pooling that can cause poor detergent release or residue
• Restores proper alignment if the original tray is cracked, broken, or deformed

• Disconnect power to the appliance before starting any repair
• Remove the dishwasher door inner panel or dispenser bezel as required to access the dispenser assembly
• Handle parts gently to avoid damaging clips and seals; replace any worn gaskets

This upper dispenser tray replaces a cracked or worn tray in the dishwasher dispenser assembly to help contain detergent and direct water flow for reliable dispensing. It restores the dispenser area's fit and function. What it does:

• Replaces the upper tray that sits above the detergent/dispenser opening
• Helps channel water and detergent for proper dispensing during the wash cycle
• Prevents leaks and reduces buildup caused by a damaged or warped tray
• Common symptom: visible cracks, warping, or detergent pooling around the dispenser area

• Remove power to the appliance before attempting service
• Typically accessible from the dishwasher door or dispenser assembly; follow OEM disassembly steps
• Handle parts carefully to avoid damaging tabs or clips that secure the tray

This flexible inlet/fill hose routes water into the appliance, restoring proper water delivery for normal operation. Replace a damaged hose to stop leaks and ensure reliable water flow. What it does:

• Carries incoming water from the supply to the appliance fill assembly
• Prevents water leaks when intact; a cracked or split hose can cause pooling or drips
• Restores normal fill behavior when worn or collapsed hoses reduce flow
• Works with clamps or fittings at each end to create a watertight seal

• One flexible inlet/fill hose

• Turn off the water supply and disconnect power before removing the old hose
• Inspect and replace any worn clamps, gaskets, or fittings for a secure seal
• Hand-start fittings, then tighten with tools—avoid over-tightening to prevent damage
• After installation, restore water and power, then run a short cycle and check for leaks

The Valve is an OEM replacement part for Bosch clothes washers. It regulates water intake, determining volumes for specific cycles. Balanced flow conserves resources without sacrificing clean performance. 

Causes of a bad valve can include mineral deposits clogging internal pathways over time. Constant opening/closing stresses rubber seals and disrupts precision.

Symptoms of a bad valve include:

• Inconsistent or insufficient water levels between loads   
• Washer fills on small loads wasting water 
• Extended cycle times as valve struggles to meter H2O
• Leaks that seep from the valve body into internal components

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This water inlet hose gasket seals the connection between the supply hose and the appliance's inlet fitting. Replace a flattened or damaged washer to stop drips at the coupling and restore a reliable, watertight connection.

• Creates a watertight seal at the inlet hose-to-appliance connection
• Helps prevent drips, puddles, and water damage around the machine
• Replace if the old gasket is cracked, hardened, flattened, or missing
• Common symptoms: leaking at the hose coupling or needing to retighten the fitting to stop drips

• Disconnect power and turn off the water supply before servicing
• Place a towel to catch residual water, then detach the inlet hose from the appliance fitting
• Remove the old gasket from the hose coupling and seat the new gasket evenly
• Reattach and hand-tighten the coupling; open water supply and check for leaks—do not overtighten

The Cold Water Inlet Hose is an OEM replacement part for Bosch washing machines. It serves as a flexible supply line that delivers cold water from an external plumbing source directly to the washer. This hose plays an important role in providing a balanced mix of hot and cold water flow into the unit.

Symptoms of a bad cold water inlet hose include:

• Fluctuations in water temperature during cycles  
• Issues with certain temperature settings like warm or cold not operating properly
• Visible cracking, kinking, or leaking along the hose body
• No water flow or pressure at the cold supply 

Causes of a failed cold water inlet hose can be mineral deposits clogging the line, natural wear and tear over time, or physical damage from crushing or abrasive surfaces compromising its integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.

This pressure-chamber hose routes the dishwasher's tub pressure signal to the water-level chamber so the control can detect fill level and stop filling when appropriate. It helps restore proper fill control and reliable cycle operation. What it does:

• Carries air/water pressure from the tub to the pressure chamber for accurate water-level sensing
• Enables the dishwasher to detect full/overfill conditions and stop the fill valve
• Can prevent overfilling, continuous filling, or erratic cycle behavior when functioning
• Failures may cause fill errors, long fill times, or incorrect cycle operation

• One pressure chamber hose (single replacement hose as shown)

• Disconnect power and water supply before servicing the dishwasher
• Access may require removing lower kickplate and/or tub access panels per your model service instructions
• Inspect hose routing and clamps; replace any damaged clips and ensure hose is free of kinks when installing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This flexible water hose routes water between internal components in your appliance. Replacing a worn or cracked hose restores a sealed, reliable water path to help prevent leaks and water-flow issues.

• Directs water between assemblies to maintain proper flow
• Helps keep the water path watertight to avoid leaks
• Can resolve symptoms like slow/failed draining, pooling water, or visible drips
• Replaces hoses that are brittle, cracked, kinked, or clogged

• Disconnect power and shut off water supply before servicing
• Place towels or a pan to catch residual water; note original routing
• Move over and secure existing clamps/seals; avoid kinks during routing
• Run a test cycle and check all connections for leaks

This holder is a replacement mounting bracket that secures a small internal component in place to restore proper alignment and support. It helps keep parts stable so the appliance operates as intended. What it does

• Secures and supports an internal component to prevent movement or misalignment
• Replaces cracked, broken, or worn mounting points that allow rattling or improper part position
• Restores stable contact where a loose component causes intermittent operation or noise
• Fits a specific OEM location; use the part number to confirm exact application

• One replacement holder/mounting bracket

• Disconnect power and water before starting any repairs
• Inspect surrounding clips or fasteners and reuse or replace as needed—this part typically snaps or screws into place
• Handle plastic mounting parts gently to avoid cracking during installation

This pressure chamber is the molded air chamber that works with a dishwasher's water-level sensing system to help the appliance detect correct fill levels and maintain reliable wash performance. What it does:

• Forms the air pocket used by the water-level sensor/pressure switch to detect fill height
• Helps prevent overfilling or underfilling by transmitting pressure changes to the sensor assembly
• Can be replaced when cracked, collapsed, or blocked by debris or hard-water buildup
• Compatible with systems that use an external pressure tube and sensor/switch for water sensing

• Disconnect power and shut off the water supply before beginning service.
• Handle the chamber and any attached tubing gently to avoid kinks or damage; ensure a tight, leak-free connection to the sensor.
• Inspect and replace any brittle or clogged tubing and seals during installation.

This door lock assembly secures the appliance door during operation so cycles can run safely and reliably. It replaces a worn or broken latch to restore proper door closure and locking action. What it does:

• Secures and latches the appliance door so the unit can start and run
• Prevents the door from opening mid-cycle, reducing leaks and interruptions
• Common fix for door-not-locking, door won't stay closed, or related error codes
• Works as the mechanical/electrical interface that detects a closed door

• Disconnect power before beginning any repair to avoid shock
• Handle carefully; avoid forcing the latch or twisting mounting tabs
• Verify correct orientation and engage mounting screws securely but not overtighten

The Drain Pump is an OEM part for Bosch washing machines. It is responsible for removing water from the washer drum during the drain cycle, ensuring that the washing process completes efficiently. The pump forces the water out through the drain hose, preventing water from pooling in the drum.

Causes of a bad drain pump can include blockages from debris, wear and tear from regular use, or electrical issues.

Symptoms of a bad washer drain pump include:

• The washer not draining water
• Unusual noises during the drain cycle
• Error codes related to drainage issues on the washer’s display
• Water left in the drum after the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Hot Water Inlet Hose is an OEM replacement part for Bosch washers. It serves as a flexible supply line that delivers hot water from an external water heating hot water heater directly to the washer. This hose plays a key role in optimizing wash performance through consistent delivery of hot water for optimal cleaning and sanitization. 

Causes of a bad hot water inlet hose can include wear and tear over time, repetitive flexing weakening the hose material, mineral buildup restricting flow, or damage due to sharp edges or crushing forces.

Symptoms of a bad hot water inlet hose include: 

• Loss or reduction of hot water during wash cycles
• Decreased cleaning ability from insufficient water heating 
• Visible kinks, cracks, or splits along the hose body
• Leaks or drips at hose connections under the washer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This valve magnet is the electromagnetic coil that actuates the appliance's valve, allowing the control to start and stop flow as needed. Replacing a weak or open coil restores dependable valve operation and proper cycle performance.

• Converts electrical signals into magnetic force to move the valve plunger
• Opens and closes the mated valve on command to regulate flow during cycles
• Failure symptoms include no flow, continuous flow, intermittent operation, or related error codes
• A weakened coil can cause the valve to hum without actuating

• Disconnect power and shut off any supply before servicing
• Access the valve and note wire positions for correct reassembly
• Slide the new coil fully onto the valve body; ensure proper orientation and seating
• Reconnect wiring, restore supply, and test for correct operation and leaks

This outer housing cover protects internal components and finishes the appliance exterior, helping keep dirt and moisture out while maintaining a clean, safe appearance. Fits original equipment to restore proper enclosure. What it does:

• Shields internal wiring, controls, and mechanisms from debris and accidental contact
• Helps prevent moisture and grime from reaching sensitive parts
• Restores the appliance's exterior appearance when the original cover is cracked or missing
• Can reduce drafts or minor vibration paths when installed correctly

• One outer housing cover

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate hand tools; retain all fasteners for reassembly
• Inspect adjoining seals and mounting points; replace damaged hardware as needed

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.