Parts for Bosch WFVC844PUC/25: Cabinet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly

This small mounting spacer positions and cushions appliance components to keep panels and parts aligned and reduce vibration. It restores correct clearance between parts for smoother, quieter operation. What it does:

• Keeps consistent gap and alignment between adjacent components or panels
• Cushions against vibration to help reduce rattling or noise
• Helps maintain proper fit of trim, panels, or assemblies that rely on a spacer
• Worn or missing spacers can cause misaligned panels, noise, or uneven gaps

• Disconnect power and water before accessing the area.
• Access may require removing trim, panels, or adjacent components; keep fasteners organized.
• Replace like-for-like; do not force parts into place—verify correct orientation before final assembly.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

2 included - Front load

2 included - Front load

This replacement foot supports and levels your appliance so it sits steady and operates smoothly. Replace a worn or missing foot to restore proper height, reduce wobble, and help protect surrounding surfaces.

• Supports the base/frame to maintain proper height and alignment
• Provides leveling adjustment so the unit remains stable
• Helps reduce rocking, vibration, and rattling during operation
• Replace if the original foot is cracked, stripped, missing, or won't adjust

• Disconnect power; shut off water or gas supplies if applicable
• Carefully tilt or raise the unit to access the foot location
• Remove the damaged foot and install the new one per design
• Level the appliance front-to-back and side-to-side; verify stability before use

The Door Lock Latch is an OEM part for Bosch washers. This part is responsible for securing the washer door during operation, ensuring safety during washing cycles. It prevents the door from opening accidentally and interrupting the wash cycle.

A bad door lock latch can occur due to wear and tear, mechanical failure, or electrical malfunctions. Signs of a faulty latch include the door not locking or staying closed, error codes related to the door lock system, or the washer not starting or completing cycles.

Symptoms of a bad door lock latch include:

• The door not locking or staying closed  
• The washer not starting or completing cycles

Replace your malfunctioning or damaged door lock latch with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This replacement rod provides the small metal linkage used to stabilize and connect moving components in the appliance, restoring secure alignment and quiet operation. It fits where a worn or damaged rod causes looseness. What it does:

• Replaces a worn or bent support/linkage rod to restore proper mechanical connection
• Helps stop rattling, clunking, or shifting caused by a broken or loose rod
• Restores alignment so doors, levers, or internal assemblies operate smoothly
• Useful when visual damage, bending, or play is observed in the original rod

• One replacement rod

• Disconnect power and water before starting repairs
• Use basic hand tools; keep track of small fasteners and clips during removal
• Do not force parts; inspect surrounding components for wear when replacing the rod

This factory fastener secures appliance components and panels so they stay aligned and quiet. Replacing a missing, stripped, or corroded screw restores a tight fit and helps prevent vibration, rattling, and premature wear.

• Secures brackets, covers, panels, or internal parts per your model's design
• Helps maintain alignment and reduce vibration/noise during operation
• Replaces lost, stripped, rusted, or damaged hardware
• Common signs include loose or shifting panels, rattling sounds, or a missing screw found during service

• Disconnect power before servicing; shut off water or gas if applicable to your appliance
• Match the screw to the original location/length; replace one at a time to avoid mix-ups
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Use the correct driver for the head type on your model to avoid stripping

This cable harness routes power and control signals between the dishwasher control board and components, restoring reliable electrical connections for proper operation. Designed to replace damaged or worn wiring where connectors or insulation are compromised. What it does:

• Transfers power and control signals between the main control/module and subsystems (pumps, valves, sensors, motor)
• Replaces frayed, burned, or broken wires and damaged connector ends that cause intermittent operation or component failures
• Restores proper connector fit and wiring routing to prevent shorts and miscommunication
• Helps resolve symptoms like no power to components, intermittent function, or visible wiring damage

• Disconnect power to the appliance before starting work to avoid shock or damage
• Keep track of connector positions; take photos before removing the old harness for accurate reinstallation
• Route the new harness along the same path and secure any clips or ties to prevent pinching or contact with moving parts
• If you encounter corrosion or damaged connectors on mating parts, inspect and replace those components as needed

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

A small replacement screw used to secure panels, brackets, and other appliance components. Restores proper fastening to reduce rattling and prevent parts from becoming loose or detached during operation. What it does:

• Fastens panels, trim, brackets or assemblies in place to maintain structural fit
• Replaces missing, stripped, or corroded screws that cause rattling or loose parts
• Helps restore normal operation by keeping components aligned and secure
• Works wherever the OEM screw specification and thread fit this mounting point

• Disconnect power (and water, if applicable) before servicing the appliance
• Use the correct screwdriver and size to avoid stripping the head
• Tighten snugly but avoid overtightening, which can strip threads or crack plastic
• Verify threads and length match the original part before final installation

This is a replacement screw used to secure internal components and exterior panels on compatible Bosch appliances. It restores proper fastening to reduce rattling and maintain part alignment. What it does:

• Fastens panels, brackets, or components in appliance assemblies
• Keeps removable parts securely attached to prevent vibration and noise
• Replaces missing or stripped screws that cause loose or misaligned parts
• Helps restore safe, stable operation when hardware is worn or lost

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid over-tightening to prevent damage
• Keep small parts away from children and work on a stable surface

This replacement screw secures appliance panels, brackets, and internal components so your unit stays assembled, aligned, and quiet. Replace stripped, missing, or corroded screws to restore a tight fit and help prevent vibration or leaks.

• Fastens panels, trim, brackets, or internal parts in their correct position
• Helps maintain alignment and sealing to reduce noise and potential leaks
• Replaces worn, stripped, rusted, or lost hardware
• Common symptoms: loose or rattling panel/handle, misaligned parts, components shifting

• Disconnect power and, if applicable, shut off water before servicing
• Match the head/size to the original hardware; do not mix lengths across locations
• Start threads by hand to avoid cross-threading; tighten snugly without over-torque
• For plastic or thin sheet metal, avoid overtightening to prevent stripping or cracking

This is a replacement screw used to secure internal components and exterior panels on compatible Bosch appliances. It restores proper fastening to reduce rattling and maintain part alignment. What it does:

• Fastens panels, brackets, or components in appliance assemblies
• Keeps removable parts securely attached to prevent vibration and noise
• Replaces missing or stripped screws that cause loose or misaligned parts
• Helps restore safe, stable operation when hardware is worn or lost

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid over-tightening to prevent damage
• Keep small parts away from children and work on a stable surface

This inner door panel replaces a damaged or corroded dishwasher door interior to restore a clean, sealed surface and proper latch alignment. Designed to match factory fit and help prevent leaks and improve door operation. What it does:

• Replaces the dishwasher's interior door surface to protect insulation and internal components
• Restores a flat sealing surface to help the door latch and close properly
• Reduces risk of leaks caused by dents, cracks, or corrosion in the inner door
• Helps maintain proper alignment for the door gasket and mounting hardware

• Disconnect power and water supply before beginning any repair
• Handle panel edges carefully to avoid cuts; wear gloves if needed
• Require removing outer door panel, inner trim, or door screws—keep fasteners organized

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This flat mounting washer helps secure fasteners and maintain proper spacing on appliance assemblies for stable operation and reduced movement. It's a simple replacement that restores the original fit of bolted connections. What it does:

• Sits under a screw or bolt head to distribute load and protect the mounting surface
• Helps keep fasteners from digging into or deforming adjacent parts
• Restores correct spacing where a worn or missing washer caused looseness
• Can reduce vibration-related noise from loose connections

• Disconnect power and water to the appliance before servicing
• Access the fastener and remove the old washer; note the original orientation
• Reinstall with the replacement washer under the fastener head or nut; start threads by hand to avoid cross-threading
• Tighten securely but avoid over-torquing; inspect surrounding parts for wear

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.