Parts for Electrolux E23CS78HSS2: 07 - Cabinet Parts

Reduces odors from onions, garlic, fish, and spoiled food using activated carbon and baking soda. Replace every 6 months for fresh air. Confirm fit by model.

Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.

Replacement cam riser for refrigerator door hinges. Installs at the top hinge assembly. Replace if cracked, broken, or worn to restore smooth door operation.

This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.

• Supports the glass tray and allows smooth, consistent rotation
• Helps prevent tray wobble, binding, or scraping noises
• Can address issues like the tray not turning or uneven cooking
• Replaces cracked, warped, or missing roller rings

• Disconnect power before servicing
• Remove the glass tray, lift out the old ring, and clean the cavity floor
• Place the new ring wheels-down, seat the tray on the coupler, and test rotation
• Do not operate the microwave without the roller ring and tray properly installed

Upper door hinge for refrigerator fresh food and freezer doors. Replaces broken, bent, cracked, or missing hinges from moving or wear.

This upper hinge cover is the plastic trim piece that snaps over the refrigerator's top door hinge to protect the hinge and restore a finished appearance. It hides hardware and helps keep the hinge area clean. What it does:

• Covers and protects the upper door hinge from dust, spills, and accidental contact
• Restores the refrigerator's finished look when the original cover is cracked or missing
• Helps prevent debris from accumulating around hinge hardware
• Supports safe operation by keeping moving parts shielded

• High-level task: usually snaps into place or attaches with the existing hinge screws; some models require loosening the hinge to fit the cover
• No electrical disconnect is typically required, but unplug the appliance or turn off power for safety when working near electrical components
• Keep original screws and hardware; re-use existing hinge fasteners unless replacements are supplied
• If hinge alignment is affected, re-tighten hinge hardware and check door operation after installation

Specs: 1.40`` long

Specs: Hex head ,1/4-20 x 5/8

This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.

• Supports the glass tray and allows smooth, consistent rotation
• Helps prevent tray wobble, binding, or scraping noises
• Can address issues like the tray not turning or uneven cooking
• Replaces cracked, warped, or missing roller rings

• Disconnect power before servicing
• Remove the glass tray, lift out the old ring, and clean the cavity floor
• Place the new ring wheels-down, seat the tray on the coupler, and test rotation
• Do not operate the microwave without the roller ring and tray properly installed

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Mounting channel that secures refrigerator shelves to interior walls. Replace if cracked, broken, or no longer holding shelves securely in place.

Refrigerator door guide channel that helps align and support the door mechanism. Replace if cracked, broken, or worn to restore proper door alignment.

Genuine mounting screw secures panels, brackets, and covers inside your refrigerator. Replace missing, stripped, or corroded fasteners to restore secure fit.

Fix inconsistent cooling or freezer frost buildup with this refrigerator air damper assembly. Controls airflow between compartments. Moderate DIY repair.

Front kickplate grill cover for your refrigerator. Snaps onto the base to conceal mechanics. Replace if cracked, broken, or missing for a clean look.

This replacement mounting screw secures appliance components and restores proper fit where original fasteners have stripped, corroded, or been lost. It's a simple, low-cost fix to keep panels, brackets, and small assemblies held in place. What it does:

• Fastens panels, brackets, trim, or small assemblies to the appliance frame
• Restores secure attachment when original screw is missing or damaged
• Prevents vibration-related noise from loose components
• Helps maintain safe, correct alignment of connected parts

• Use the matching driver and correct size to avoid stripping the head
• Hand-start the screw to ensure proper thread alignment before tightening
• Do not overtighten; stop when snug to avoid damaging threads or plastic parts
• Disconnect power and follow all safety guidelines for your appliance before servicing

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Supports the compressor on the refrigerator's rear base. Replace if cracked, broken, or worn to keep compressor properly seated and reduce vibration damage.

Metal rivet fastener permanently secures panels, brackets, and internal components in refrigerators. Replace damaged, missing, or worn rivets to restore fit.

This cover assembly replaces a damaged or missing cover on your appliance, protecting internal components and restoring a clean, finished appearance. Use it when the original is cracked, loose, or no longer secures properly.

• Shields internal parts from debris, spills, and accidental contact
• Helps keep components enclosed and aligned for reliable operation
• Restores the appliance's finished look after damage or wear
• Common signs of failure: cracks, broken or missing tabs, discoloration, rattling, or a cover that won't stay in place

• Disconnect power before servicing; shut off water supply if working near water connections
• Remove retaining screws or release tabs; note the orientation of the original cover
• Transfer and reuse original screws, clips, or seals if required
• Do not overtighten fasteners into plastic; ensure all tabs fully engage before testing

Seals evaporator cover to direct airflow and prevent frost buildup. Replace if worn, cracked, or causing excess frost. Confirm fit with your model number.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Rear support clip that holds the crisper cover shelf in place. Replace when broken, snapped, or cracked to restore stability to your crisper drawer area.

Plastic grommet that supports and secures refrigerator shelves. Replaces broken, cracked, or missing grommets causing shelves to lean or sag.