Parts for Frigidaire FFC09C6CW2: 05 - Cabinet Parts

A removable cap that covers the freezer's defrost drain hole, typically located at the bottom rear of the freezer compartment. Replace when water pools in the freezer, the cap is missing, or ice blocks the drainage system.

Hinge-side door stop that limits door travel and protects the hinge assembly. Replaces a cracked, broken, or missing stopper to restore proper alignment.

Hinge-side door stop that limits door travel and protects the hinge assembly. Replaces a cracked, broken, or missing stopper to restore proper alignment.

This temperature control knob replaces a worn or missing knob so you can easily adjust the cold-control setting. Restores smooth, precise temperature adjustments and a clean, factory look. What it does:

• Attaches to the cold-control (thermostat) shaft to change the temperature setting
• Provides secure grip and pointer alignment for accurate selections
• Typical failure symptoms: cracked or missing knob, stripped hub, or a knob that slips or won't turn the control

• 1 temperature control knob

• Disconnect power before servicing
• Pull the old knob straight off the shaft; avoid prying at an angle to prevent shaft damage
• Align the shaft shape with the new knob and press firmly until fully seated
• The pointer aligns with the control graphics after installation

Freezer not cooling or staying cold? This temperature control thermostat cycles cooling on/off to maintain set temperature. Easy DIY fix restores cooling.

Mounting screw for freezers and refrigerators. Secures internal components, panels, or shelving. Replace if stripped, missing, or damaged during repairs.

This lower dish rack holds plates, bowls and cookware securely in the dishwasher's lower cavity, restoring organized loading and smooth rolling/positioning so dishes wash evenly and the rack tracks correctly. What it does:

• Provides stable support for plates, bowls and larger items on the dishwasher bottom
• Replaces bent, rusted or damaged lower rack wires that cause dishes to tip or snag
• Restores proper rack movement so the lower rack rolls in and out smoothly
• Prevents items from shifting during the wash cycle for better cleaning coverage

• One lower dish rack (lower basket)

• Slide the rack onto the lower track/rails until it seats; check and align rollers if present
• Inspect and replace any damaged rollers, end caps or clips separately if they are worn or missing
• Handle edges carefully to avoid pinch points and wear gloves to protect hands from sharp wires
• No electrical disconnection is needed to replace the rack; for model-specific guidance

Replacement storage basket for chest freezers. Keeps food organized and accessible. Order a new basket if yours is cracked, broken, or missing.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

Replacement screw that secures brackets, shelves, trim, panels, and covers inside your appliance. Install when the original is missing, stripped, or corroded.

This basket track replaces a worn or damaged guide that lets a freezer or refrigerator basket slide smoothly in and out. Restores stable movement and helps keep the basket aligned for reliable access. What it does:

• Provides a smooth sliding surface for a refrigerator/freezer basket or drawer
• Keeps the basket aligned to prevent tipping or binding during use
• Replaces cracked, bent or worn tracks that cause sticking or noisy operation
• Helps the basket seat securely to prevent items from shifting while opening

• Disconnect power to the appliance before starting any repair to reduce shock risk
• Remove the basket/drawer and fasteners to access the old track; keep hardware if reusing
• Align the replacement track and secure with the original screws; avoid over-tightening
• Test the basket movement after installation and recheck fasteners for a snug fit

The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.

The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.

Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.

Symptoms of needing Touch Up Paint include:

• Visible scratches or chips on the appliance's surface.
• Areas of rust or corrosion that need to be covered after treating the rust.
• The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.