Parts for Frigidaire FRSS26L3AF2: Cabinet Parts

This plug covers the small factory test opening on an appliance cabinet or liner. Replacing a missing or damaged plug helps close the opening to maintain a better seal and restore a clean, finished appearance.

• Seals the factory test opening in the cabinet/panel
• Helps limit air and moisture infiltration through the hole
• Reduces condensation or frost forming around the opening
• Restores a finished look when the original cap is missing or damaged

• Disconnect power before servicing the appliance
• Clean and dry the opening area for proper fit
• Align and press the plug in by hand until it sits flush—do not force or enlarge the hole
• Avoid sharp tools or sealants that could damage the liner or insulation

This door light switch controls the refrigerator interior lamp, restoring reliable on/off operation for the cabinet light. It replaces a worn or broken switch to help ensure the light responds when the door opens and closes. What it does

• Opens and closes the circuit that powers the interior lamp when the door moves
• Replaces a faulty or loose switch that causes the light to stay on, not turn on, or work intermittently
• Mounts in the cabinet frame and is actuated by the door or a door cam
• Works with standard appliance wiring and lamp circuits

• One door light switch

• Disconnect power to the appliance before starting any work
• Access may require removing the light lens or inner cabinet trim; handle bulbs and lenses carefully
• Verify electrical connectors and switch orientation during reassembly

The Door Light Switch is an OEM part for Frigidaire refrigerators. It is a component located inside the refrigerator door that turns the interior light on and off based on door position. The light switch works with a door switch plate and light socket assembly to automatically illuminate the interior when the door is opened.

Causes of a bad switch can be normal wear and tear over time, especially from frequent door openings. The contact points within the switch can become corroded or damaged.

Symptoms of a bad light switch include:

• Interior light not turning on at all when door is opened
• Light remaining constantly on even when door is closed
• Inconsistent or intermittent lighting

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.

Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.

Symptoms of a bad or missing screw include:

• Loose or wobbly components within the refrigerator
• Panels or fixtures coming apart or misaligned
• Difficulty securing parts during maintenance or repair
• Rattling or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This door bushing kit replaces worn hinge bushings that keep refrigerator/freezer doors aligned for smooth, stable operation. Restores proper door rotation to reduce sagging, rubbing, and noisy or stiff hinges. What it does:

• Provides replacement hinge bushings that support the door on its hinge pin for correct alignment
• Helps stop door sag, scraping, and uneven gaps that let cold air escape
• Reduces hinge noise, sticking, and rough door movement
• Fits into the door hinge assembly to restore smooth pivoting action

• Always unplug the appliance or disconnect power before starting repairs
• Support the door while removing hinge pins to prevent dropping or damage
• Remove old bushings from the hinge housing and press or snap new bushings into place; reassemble hinge and confirm alignment

This hinge assembly replaces a worn or damaged refrigerator door hinge to secure and align the door for proper sealing and smooth opening. Fits factory mounting points for a direct replacement. What it does

• Supports and pivots the refrigerator door so it opens and closes correctly
• Restores proper door alignment to help improve the door seal and cooling consistency
• Stops sagging, rubbing, or uneven gaps that can cause drafts or noise
• Replaces broken or bent hinge hardware that prevents the door from seating

• One hinge assembly

• Unplug the appliance or disconnect power before beginning any repair
• Remove food and contents from the door and have a helper support the door during removal/installation
• Use basic hand tools; follow factory service instructions for torque and adjustment details

A direct-fit refrigerator door hinge assembly that restores proper door pivot and alignment for smooth opening and closing. Replaces a worn or damaged upper hinge to reduce sagging and keep the door sealed. What it does:

• Provides the pivot point for the refrigerator door and maintains proper alignment.
• Helps the door close fully to keep internal temperatures consistent.
• Commonly replaced when the door is sagging, hanging unevenly, or rubbing against the cabinet.
• Restores smooth, stable door movement and corrects uneven gaps.

• One hinge assembly.

• Unplug the appliance and empty or support the door before removing the hinge to prevent injury or damage.
• Keep door supported while swapping the hinge; some doors require two people or a support tool.
• Reuse any original mounting hardware unless replacements are explicitly provided.
• After installation, check door alignment and gasket seal; adjust as needed per the appliance manual.

This mounting bracket secures internal refrigerator components so panels, shelves or assemblies stay aligned and stable. Replaces a worn or broken bracket to reduce rattling and restore proper fit of affected parts. What it does:

• Provides a secure mounting point for panels, shelves or appliance assemblies
• Stops movement that can cause noise or misalignment
• Restores correct fit where a cracked or bent bracket allowed parts to sag
• Helps maintain safe, stable operation of the appliance

• Disconnect power before beginning any repair to reduce shock risk
• Basic hand tools are usually required; avoid overtightening fasteners
• Handle edges carefully to prevent cuts; wear gloves if needed

This mounting bracket secures internal components and panels to keep your appliance stable and aligned. It restores proper fit and reduces moving parts from shifting or vibrating during operation. What it does:

• Provides a stable anchor point for panels or internal assemblies to prevent sagging or misalignment
• Helps stop rattling, knocking, or vibration caused by loose fittings
• Maintains proper spacing so doors and service panels open and close smoothly
• Supports correct alignment of connected components for reliable operation

• One mounting bracket

• Disconnect power (unplug or shut off breaker) before starting any repair
• Installation typically requires basic hand tools (screwdriver, nut driver); keep original fasteners unless replacements are specified
• Align bracket, fasten securely, and test the appliance for proper fit and noise reduction

This cover protects internal control-panel components and wiring from dust, moisture, and accidental contact, helping keep your appliance working safely and reliably. It provides a finished appearance and shields sensitive parts during normal use. What it does:

• Shields control electronics and wiring from debris and light moisture
• Reduces risk of accidental contact with live terminals or moving parts
• Helps maintain a clean, finished look for the control area
• Can prevent small objects from entering the control housing and causing faults

• One control-panel/access housing cover

• Disconnect power (unplug or shut off circuit breaker) before servicing
• Use appropriate screw or clip removal tools; retain all fasteners for reinstallation
• Handle cover carefully to avoid cracking plastic or damaging clips
• If wiring or components need repair, inspect and address issues before replacing the cover

This cover is a replacement trim panel that restores the appliance's exterior appearance and protects internal components from dust and debris. It fits where the original cover was removed or damaged and helps keep the unit looking finished. What it does:

• Protects internal components behind the panel from dust, lint, and accidental contact
• Restores a clean, finished appearance to the appliance cabinet or control area
• Helps maintain proper airflow paths by covering openings near controls or vents
• Reduces the chance of small objects entering internal compartments

• Turn off and unplug the appliance before attempting any repair to avoid shock or injury
• Verify alignment with mounting tabs and secure with the original screws or fasteners
• Do not force the cover into place; check for any obstructions or damaged clips
• If clips or screws are damaged, replace them before reinstalling the cover

Specs: .875`` long

Specs: 1.40`` long

Specs: Hex head ,1/4-20 x 5/8

The Roller Assembly is an OEM part for Frigidaire refrigerators. It is responsible for allowing movement and stability of the refrigerator cabinet. 

A bad refrigerator wheel can be caused by wear and tear, damage, or excessive weight on the appliance. When the wheel becomes faulty, it can result in issues such as difficulty in moving or repositioning the refrigerator, uneven or wobbly movement, or scratching of the flooring.

Symptoms of a bad roller assembly include:

• Difficulty in moving the refrigerator
• Uneven movement when moving the appliance
• Scratching or scuffing of the flooring 

Replace your faulty cabinet roller assembly with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

The Main Control Board is an OEM replacement part for Frigidaire refrigerators. It is an electronic component that controls various refrigerator functions such as temperature settings, cycles, diagnostics, and more. 

Symptoms of a bad PC board include:

• Refrigerator not cooling or icing 
• Display or control panel not working properly
• Inability to change temperature settings
• Abnormal or unexpected clicking/humming sounds

Causes of failure could include exposure to moisture, power surges, or general component fatigue over time. 

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This factory screw fastens refrigerator components and panels. It replaces missing or damaged hardware so parts stay aligned and secure, reducing looseness and rattles caused by vibration. What it does:

• Secures panels, brackets, and trim per your model's design
• Helps maintain alignment and reduce vibration-related loosening or noise
• Replaces missing, stripped, or corroded hardware
• Restores a snug fit when threads or heads are worn

• One screw

• Disconnect power; turn off the water supply if working near ice or dispenser systems
• Use the correct driver; start threading by hand to avoid cross-threading
• Tighten until snug—do not overtighten to prevent stripping or cracking adjacent plastic
• Refer to your model's diagram to confirm location and quantity used

This genuine replacement screw secures appliance components and panels so parts stay properly aligned and rattle-free. Use it to replace a missing, stripped, or corroded fastener and restore a snug, reliable fit.

• Fastens brackets, covers, panels, and other hardware in their original locations
• Helps resolve loose or vibrating components and rattling noises
• Replaces missing or damaged hardware that can cause gaps or misalignment
• May be used in multiple locations

• Disconnect power; shut off water supply if working near water lines
• Compare to the original screw and install in the same location/orientation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Refer to your model's exploded view to verify quantity and placement

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This drawer roller allows your refrigerator's bin or crisper drawer to glide smoothly along its track. Replacing a worn or missing roller helps restore easy opening and closing and prevents drawers from sticking or binding.

• Supports the drawer as it slides on the rail/track
• Helps correct stiff, rough, or noisy drawer movement
• Can reduce uneven sliding or a drawer that pops off the track
• Common wear item when drawers are overloaded or used heavily

• Unplug the refrigerator before servicing
• Remove the affected drawer to access the roller
• Note roller orientation and reuse existing fasteners if applicable
• Test drawer travel after replacement to ensure smooth operation

This rivet is a metal fastener used to permanently secure panels, brackets, or internal components in your appliance. Replacing a damaged or missing rivet restores a tight fit and helps prevent vibration, rattles, and looseness.

• Permanently joins thin metal parts where screws or nuts aren't used
• Maintains alignment and structural integrity of housings and frames
• Helpful when panels or components are loose, rattling, or won't stay secured
• Direct replacement for a worn, broken, corroded, or drilled-out factory rivet

• Disconnect power and shut off gas/water (as applicable) before servicing
• Support the part being fastened; drill out the old rivet head if needed
• A hand riveter/rivet tool may be required to set the new rivet
• Wear eye and hand protection during drilling/riveting

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This cover assembly replaces a damaged or missing cover on your appliance, protecting internal components and restoring a clean, finished appearance. Use it when the original is cracked, loose, or no longer secures properly.

• Shields internal parts from debris, spills, and accidental contact
• Helps keep components enclosed and aligned for reliable operation
• Restores the appliance's finished look after damage or wear
• Common signs of failure: cracks, broken or missing tabs, discoloration, rattling, or a cover that won't stay in place

• Disconnect power before servicing; shut off water supply if working near water connections
• Remove retaining screws or release tabs; note the orientation of the original cover
• Transfer and reuse original screws, clips, or seals if required
• Do not overtighten fasteners into plastic; ensure all tabs fully engage before testing

The Ice Maker Cooling Duct is an OEM part for Frigidaire refrigerators. It directs cold air flow to the ice maker.

Causes of failure can be blockages or damage to the duct over time that impact efficient air flow.

Symptoms of a bad cooling duct include:

• Inconsistently shaped or formed ice cubes
• Slow or reduced ice production
• The ice maker failing to dispense ice properly
• Higher than normal interior refrigerator temperatures near the ice maker

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models. 

This replacement screw secures refrigerator components such as brackets, trims, and covers. Replace missing or stripped hardware to keep parts tight and aligned, helping eliminate rattles and restoring a solid, reliable fit.

• Fastens interior or exterior components to the cabinet or doors
• Replaces missing, rusty, or stripped hardware
• Helps reduce vibration noises from loose parts
• Restores proper fit and alignment of panels, trims, or covers

• Disconnect power; turn off water supply if working near the dispenser or ice system
• Retain and reuse any original spacers or washers
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace one fastener at a time to maintain alignment

This is a replacement outer housing cover that restores the appliance's exterior protection and appearance. It shields internal components from debris and helps maintain a finished look for the unit. What it does:

• Covers and protects internal components from dust, dirt and incidental contact
• Restores a clean, finished exterior where the original cover was cracked, warped or missing
• Helps prevent small objects from falling into internal openings
• Reduces visible wear on the appliance for a neater installation

• Disconnect power to the appliance before starting any work
• Remove any retaining screws or clips holding the old cover in place; lift or slide out gently
• Align the replacement cover carefully and re-secure with original hardware

The Thermistor is an OEM part for Frigidaire refrigerators and freezers, designed to accurately monitor and control the temperature within the appliance. This sensitive component reacts to temperature changes by altering its resistance, providing feedback to the control board to regulate the cooling and defrost cycles.  

Causes of thermistor failure can include physical damage, electrical failures within the circuit, or aging, which affects its accuracy and responsiveness.

Symptoms of a bad Thermistor include:

• Unusual temperature fluctuations in the refrigerator or freezer
• The appliance is constantly running or not cooling efficiently
• Error codes displayed on the refrigerator's control panel indicating thermistor problems
• Buildup of frost in the freezer or condensation in the fridge

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This support is the structural piece that holds and aligns a shelf, rack, or panel within your appliance. Replacing a worn or broken support restores proper fit and stability to prevent wobble, sagging, and related damage. What it does:

• Provides stable mounting and positioning for the associated shelf, rack, or component
• Helps maintain alignment so parts sit or slide correctly
• Replace if cracked, deformed, loose, or missing
• Symptoms can include a component that sits unevenly, drops, or won't stay in place

• Includes 1 support

• Disconnect power to the appliance before servicing
• Allow any hot surfaces to cool; wear cut-resistant gloves
• Note the orientation of the original part; reuse existing fasteners if applicable
• Ensure the support is fully seated and secure before returning the appliance to use

Color: Black/natural. Nylon

This touch-up paint restores small chips and scratches on painted appliance surfaces, helping the finish look uniform and reducing the appearance of wear. Ideal for quick cosmetic repairs on refrigerators and other household appliances. What it does:

• Covers minor paint chips, nicks and surface scratches to improve appearance
• Matches graphite-colored finishes for a blended repair
• Helps protect exposed metal from moisture after small paint loss
• Dries to a durable finish designed for appliance surfaces

What's included: One bottle of graphite touch-up paint. Install notes:

• Clean and dry the repair area thoroughly before applying
• Shake well and apply thin, even coats; allow each coat to dry before reapplying
• Test on an inconspicuous area first to confirm color match
• Keep away from heat and open flame; follow any disposal and safety instructions on the container