Parts for Frigidaire FRSS26L3AF2: Shelves Parts

Lower-position freezer glass shelf that restores a flat, sturdy surface for organizing frozen foods. Ideal replacement when the original shelf is cracked, broken, or missing, helping contain small spills and maintain usable storage space.

• Provides the lower freezer storage surface and supports containers evenly
• Helps contain drips to keep the compartment cleaner
• Replaces cracked, chipped, or shattered glass to eliminate unsafe edges
• Restores lost storage capacity and improves organization

• Unplug the refrigerator and clear the area before handling glass
• Allow the part to reach room temperature to avoid sudden temperature changes
• Wear gloves and handle edges carefully
• Install into the lower shelf supports per your model; do not force

The Upper Freezer Shelf is an OEM part for Frigidaire refrigerators. It provides additional storage space within the freezer compartment, allowing for better organization and more efficient use of the available space. This shelf fits securely in the upper section of the freezer, helping to separate and support various frozen items.

Common causes of a bad freezer shelf include heavy loads that cause cracking or breaking, warping from prolonged exposure to cold temperatures, or accidental impact.

Symptoms of a bad upper freezer shelf include:

• Visible cracks or breaks in the shelf
• The shelf not fitting securely in its designated slots
• Difficulty organizing or storing items due to an unstable shelf
• The shelf sagging under weight

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This trim piece restores the finished edge on a refrigerator door for a clean, factory look and helps protect the door edge from wear. It's a direct-fit cosmetic replacement where the original trim is cracked, loose, or missing. What it does:

• Replaces damaged or missing door edge trim to restore appearance
• Covers and protects the exposed edge from chips and daily wear
• Helps maintain a proper seal by securing gasket edges
• Common symptom: visible cracks, gaps, or a loose strip along the door edge

• One refrigerator door trim piece

• High-level, no-special-tools installation; trim typically snaps or screws into place
• Confirm correct trim orientation before fastening to avoid damage
• Use a soft cloth and mild cleaner on surrounding surfaces during install
• Disconnect power only if working near electrical components; otherwise power removal not usually required

Replacement trim that restores the appliance's finished appearance and protects exposed edges from damage. Installs at the exterior to cover gaps and give a clean, factory look. What it does:

• Conceals exposed edges and gaps for a neater, finished appearance.
• Helps protect door or cabinet edges from chips, scratches and normal wear.
• Replaces cracked, broken or missing trim that makes the appliance look worn.
• Typically snaps or screws into place.

• Disconnect power to the appliance before beginning any service.
• Support the door or panel as needed to avoid pinching or dropping during removal/installation.
• Remove and retain any original fasteners; trim may be snap-fit or screw-secured depending on model.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This small plastic retainer clip secures interior trim and components so panels and shelves stay aligned and rattle-free. A direct-fit replacement that restores proper mounting where the original clip is broken or missing. What it does

• Holds interior trim, liners or lightweight panels in place to prevent gaps or movement.
• Stops rattling or vibration caused by a loose or damaged retainer.
• Restores secure mounting after a broken or missing clip.
• Works where a snap-in or press-fit fastener is required.

• Disconnect power to the appliance before beginning any repairs to avoid electrical hazards.
• Access the clip location by removing the affected trim or panel per your model's service instructions.
• Clip typically snaps into a hole or slot; press firmly until it seats. Small pliers may help for removal/installation.
• If mounting area is damaged, inspect surrounding parts and replace as needed for a secure fit.

The Shelf Assembly is an OEM part for Frigidaire side-by-side refrigerators. It includes the glass shelf surface.

Symptoms of a bad shelf assembly can include:

• Cracked, pitted or clouded glass shelf surfaces
• Discolored, bent or loose metal support brackets  
• Shelves that no longer glide smoothly on slides
• Excessive gaps between shelf and liner walls

Causes may be normal wear and tear over time like minor chips and dings, accident damage from jars or bottles falling on shelves, or stresses from overload.

This OEM Frigidaire replacement is also compatible with some Kenmore models. 

This crisper cover is the glass shelf that sits over the refrigerator crisper/vegetable drawers, giving a flat storage surface and helping contain spills above the drawers for easier cleanup and organization. What it does:

• Provides a sturdy, level shelf above the crisper drawers to support food and containers
• Helps keep spills and leaks contained on the shelf for simpler clean-up
• Maintains visibility into the crisper area while protecting contents below
• Restores proper shelf fit and spacing when the original cover is damaged or missing

• One crisper cover (glass shelf)

• Remove stored food and slide out crisper drawers as needed for access before installing
• Handle the glass carefully; set on a soft surface to avoid chipping or breakage
• Align the shelf with the support rails and lower into place until fully seated

The Crisper Cover is an OEM part for Frigidaire refrigerators. It is designed to fit and protect the lower crisper drawer, keeping your fruits and vegetables fresh and organized.

A bad crisper cover can be caused by wear and tear, damage, or accidental mishandling. When the cover becomes faulty, it can result in issues such as difficulty in sliding the drawer in and out, inadequate humidity control, or compromised freshness of stored produce.

Symptoms of a bad crisper cover include:

• Difficult drawer movement
• Excessive moisture in the crisper drawer
• Spoiled or wilted fruits and vegetables

Replace your faulty crisper cover with this genuine OEM part to restore storage in your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Crisper Pan is an OEM part for Frigidaire bottom-mount refrigerators. Located in the crisper drawer, this removable pan collects moisture to prevent vegetables from becoming dry or wilted. Its inset design allows for organized storage of fruits and veggies.

Causes of failure can be cracks or breaks from weight of stacked items. Normal wear over time may also compromise the seal. 

Symptoms of a faulty crisper pan include:

• Excess moisture collecting in the bottom of the crisper drawer  
• Produce drying out or wilting more quickly
• Ill-fitting or loose crisper pan that slides around 

This OEM pan is also compatible with Electrolux, KitchenAid, and select Kenmore models.

The Lower Crisper Drawer Cover is an OEM part for Frigidaire refrigerators. It is designed to fit and protect the lower crisper drawer, keeping your fruits and vegetables fresh and organized.

A bad lower crisper drawer cover can be caused by wear and tear, damage, or accidental mishandling. When the cover becomes faulty, it can result in issues such as difficulty in sliding the drawer in and out, inadequate humidity control, or compromised freshness of stored produce.

Symptoms of a bad lower crisper drawer cover include:

• Difficult drawer movement
• Excessive moisture in the crisper drawer
• Spoiled or wilted fruits and vegetables

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This replacement basket restores organized, easy-to-access storage inside your appliance. It securely holds contents in the designated spot so you can load, retrieve, and see items as intended.

• Provides a dedicated container to keep items upright and organized
• Replaces a cracked, bent, or missing basket that no longer stays seated
• Helps prevent items from tipping, spilling, or falling into the compartment
• Common signs it's needed: broken plastic/wires, warped frame, loose fit, or difficulty keeping the basket in place

• Remove contents from the area before installing
• Position the basket in its designated location; ensure edges/tabs align and it seats flat
• Do not force into place
• Wear cut-resistant gloves to protect hands from sharp edges inside the cabinet

The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.

You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.

Symptoms of a bad freezer basket hanger include:

• The freezer basket not staying in place
• Difficulty in sliding the basket in and out
• Visible cracks or breaks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This refrigerator water tube carries fresh water between the valve, reservoir, dispenser, and/or ice maker. Replacing a cracked or kinked tube restores proper water flow and helps stop leaks inside or behind the refrigerator.

• Directs pressurized water between components in the refrigerator's water system
• Common failure signs: leaks, visible cracking, kinks, or pinhole sprays
• May cause no or slow dispenser flow, or an ice maker that doesn't fill
• Restores correct routing after tubing becomes brittle or damaged with age

• Unplug the refrigerator and shut off the household water supply before servicing
• Place a towel under connections and dispense water to relieve line pressure
• Depress quick-connect collars or loosen clamps to remove the old tube; route the new tube exactly like the original
• Fully seat tubing in fittings, perform a gentle tug test, restore water, check for leaks, and flush several cups to clear air

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling