Parts for Ge PFS22MISBBB: 02 - Cabinet Parts

Purifies water before reaching your dispenser and ice maker. Replace every 6 months for clean, safe drinking water. Verify fit with your model number.

Lower skirt panel for refrigerator base trim. Replaces cracked, broken, or missing bottom panels. Restores finished appearance at floor level.

This rubber damping bumper cushions and reduces vibration where two appliance components meet, helping doors and panels close more softly and preventing metal-on-metal noise and wear. It's a simple replacement that restores quieter operation. What it does:

• Absorbs shock and vibration between mating parts to reduce noise
• Helps door or panel close smoothly and prevents slamming
• Prevents direct metal-on-metal contact to reduce wear and rattles
• Small, flexible pad designed to sit in a mounting recess or on a bracket

• One rubber damping bumper

• Small part; verify mounting location and orientation before removing the old bumper
• Use basic hand tools as needed; replace only after disconnecting power if working near electrical components
• Inspect surrounding brackets and fasteners for damage and clean mounting area before installing
• If adhesive is present, allow it to cure per manufacturer instructions before normal use

This right-side cabinet support secures and aligns the appliance cabinet for proper door and panel fit, helping restore stable operation and reduce cabinet movement or gaps. It's a direct-fit replacement designed to reinstall quickly with common tools. What it does:

• Provides structural support for the appliance cabinet on the right side to prevent sagging or misalignment
• Keeps panels and doors properly aligned to stop rubbing, uneven gaps, or poor sealing
• Restores stable mounting points for attached components and hardware
• Helps reduce vibration or movement that can occur when cabinet supports are worn or damaged

• Disconnect power (and water, if applicable) before starting any repair
• Remove outer panels or trim as needed to access the right-side support; keep fasteners organized
• Use basic hand tools; verify orientation and fit before tightening all fasteners
• Replace with OEM-approved parts for secure installation

Center door hinge assembly for side-by-side refrigerators. Replaces worn, cracked, or broken hinges that cause door misalignment or sagging.

Center hinge assembly for refrigerator left-hand door. Replaces broken, worn, or damaged hinges causing door alignment issues or loose mounting.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Secures small moving parts and assemblies in refrigerators. Replace if the original pin is bent, broken, or missing to restore proper alignment.

Illuminates your refrigerator interior. Replace when burned out or flickering. Appliance-rated for durability. Verify wattage and base type match.

Refrigerator not cooling but freezer works? A failing evaporator fan motor stops cold air circulation. This assembly restores airflow and temperature.

L175-20F

L140-30F

Fix a refrigerator light that won't turn on with this light socket assembly. Simple DIY repair that restores interior lighting in minutes.

Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.

Refrigerator not cooling or compressor clicking on and off? This compressor kit restores cooling. Requires certified technician with specialty tools.

Refrigerator door stopper component that cushions and limits door movement. Replace if cracked, broken, or missing to prevent door damage and ensure proper closure.

Filter drier for refrigerator sealed systems. Removes moisture and contaminants from refrigerant. Replace if frozen, iced over, cracked, or restricted.

Fix a refrigerator that won't cool or has temperature control issues with this main control board. Moderately difficult repair, taking 15-45 minutes.

Fix a blank or non-responsive refrigerator display panel with this control board. Restores temperature readout and button functions on the front panel.

Fix clicking sounds and warm temps with this start relay and overload protector. Controls compressor start-up and prevents overheating. 15-minute DIY fix.

Fixes refrigerator clicking noise and compressor not starting. This overload relay protects the compressor from overheating and restores normal operation.

Refrigerator not cooling or running hot? A failed condenser fan motor prevents heat removal from the condenser coils. DIY repair in under 30 minutes.

Provides start and run voltage to the compressor. Replace if cracked, damaged, or failing. Installs near the compressor at the bottom of the unit.

Replace your refrigerator's water filter cover if cracked, broken, or missing. Ensures proper filter housing seal and protects filter cartridge. Verify fit with your model number before ordering.

Allows water dispenser and ice maker to operate without a filter installed. Replace when damaged or missing to restore water flow. Verify fit by model.

Purifies water before reaching your dispenser and ice maker. Replace every 6 months for clean, safe drinking water. Verify fit with your model number.

Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.