Parts for Ge GNW128PSM0WW: Cabinet Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

A small replacement housing screw that secures appliance panels and brackets, restoring proper fit and preventing rattles or loose panels. Fits common appliance housings where a short ST4 x 12 self-tapping screw is required. What it does:

• Fastens housing panels, trim, or internal brackets to maintain proper alignment and reduce vibration
• Replaces missing or damaged screws that cause loose or rattling panels
• Works with sheet metal and plastic mounting points designed for ST4 thread size
• Small, low-profile head designed for appliance interiors

• One housing screw (ST4 x 12)

• Disconnect power before servicing the appliance and work on cool surfaces
• Use the correct screwdriver or bit to avoid stripping the head
• Install gently and avoid overtightening to prevent thread or panel damage

This tapping screw is a self-tapping fastener used to secure panels and components on compatible appliances, restoring secure mounting and preventing loose or vibrating parts. It's a direct replacement for a single factory screw. What it does:

• Threads into sheet metal or plastic mounting points to hold panels, brackets, or small components
• Replaces missing or stripped screws that cause loose panels or rattling
• Helps restore proper alignment and secure connections for controls and covers
• Works where a self-tapping fastener is required instead of a machine screw

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid cam-out and head damage
• Start threading by hand to ensure proper engagement, then tighten until snug — do not over-torque
• Replace only with the exact part to ensure fit and proper fastening

A single self-tapping screw used to secure appliance panels and trim for a stable, vibration-free fit. Replaces a lost or damaged mounting screw to restore proper part attachment and reduce rattling. What it does:

• Fastens control panels, brackets, trim pieces or small assemblies to metal or plastic surfaces
• Creates its own threads for a tight hold in sheet metal or molded openings
• Helps eliminate loose parts that can cause noise, vibration, or misalignment
• Commonly used where original screws have stripped, corroded, or been lost

• One tapping screw (quantity: 1)

• Use the correct-size Phillips or Torx driver to avoid cam-out or head damage
• Start straight and apply steady pressure; do not overtighten to prevent stripping or cracking
• Disconnect power and remove any panels before working
• If threads are damaged, replace the mating fastener or insert before installing this screw

A small replacement felt pad that cushions the dryer drum and reduces noise and wear. Replaces a worn or torn felt that lets the drum rub against the bulkhead or glide surfaces. What it does:

• Cushions the drum to prevent metal-on-metal contact and reduce scraping noises
• Absorbs vibration to help cut down hums and rattles during operation
• Helps keep the drum aligned for smooth rotation
• Protects the drum edge and adjacent components from wear

• Turn off and unplug the appliance before starting any repair
• Remove the dryer front or drum per manufacturer instructions to access the felt pad
• Inspect surrounding felt seals and glides; replace any damaged parts for best results

This harness clip secures a wiring harness to the appliance chassis to keep wiring routed and protected from heat, moving parts, and abrasion. It helps reduce wire strain and prevents rubbing or chafing that can cause electrical issues. What it does:

• Holds the wiring harness in place to maintain safe routing and prevent contact with hot or moving components
• Helps stop harness vibration and rattle that can cause noise or loosen connections
• Reduces the chance of wire insulation wear from rubbing or chafing
• Supports consistent electrical connections by preventing undue strain on terminals

• One harness clip

• Disconnect power (unplug appliance or shut off breaker) before inspecting or replacing wiring clips
• Remove panels as needed to access the harness mounting location
• Press the clip into the mounting hole or snap the harness into the clip until secure; needle-nose pliers may help in tight spots
• Inspect surrounding wiring and connectors for damage when replacing the clip; replace any damaged wiring or connectors per OEM guidance

This genuine replacement hook secures and supports a door or panel to restore proper latching and alignment. It's a simple, direct swap that helps fix loose or misaligned doors and prevents unexpected opening. What it does

• Provides a secure anchor point for the door latch or strike to engage
• Restores correct door alignment and closing action when the original hook is damaged or bent
• Helps stop doors from slipping out of position or failing to latch
• Common symptom: door feels loose, won't stay closed, or is misaligned

• One replacement hook

• Disconnect power or shut off the appliance before inspecting or replacing parts
• Basic hand tools may be required to remove trim or access panels
• Handle edges and mounting tabs carefully to avoid damage or injury

This is a replacement cabinet handle that restores a secure grip and easy access to your appliance door or compartment. It fits where the original handle is cracked, loose, or missing and matches OEM mounting locations. What it does

• Provides a sturdy, ergonomic grip for opening and closing the cabinet or appliance door
• Replaces cracked, broken, or worn handles that make doors hard to open
• Restores original fit and alignment when the existing handle is loose or damaged
• Matches factory mounting points to simplify replacement

• Use basic hand tools; avoid overtightening fasteners which can crack plastic parts
• If replacing a handle on an electrical appliance door, disconnect power before working near controls
• Keep removed fasteners and any decorative trim to reuse if applicable

Fix a washer that won't start or hums loudly with this motor start/run capacitor. Provides the electrical boost motors need to run smoothly.

This outer harness protective cover is a replacement protective sleeve that protects the appliance wiring harness from abrasion, heat and wear to help maintain safe wire routing and reliable electrical connections. What it does:

• Shields the wiring harness from rubbing, chafing and minor heat exposure
• Helps prevent insulation damage that can lead to exposed wires or shorts
• Keeps harness routing neat to reduce strain on connectors
• Can reduce intermittent electrical faults caused by damaged or pinched wires

• Disconnect power to the appliance before starting any repair.
• Access the harness by removing the service panel or back cover as required by your model.
• Slide the cover over the harness or replace the damaged section; secure per OEM routing and clips.

Fix a washer that won't drain or leaves standing water with a new drain pump assembly. Resolves incomplete cycles and drainage failures.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This internal drain hose clamp secures the washer tub outlet hose to prevent leaks and keep the drain path stable during use. A simple replacement that helps restore proper drainage and reduces water leakage risk. What it does:

• Fastens the internal drain hose to the tub outlet to maintain a sealed connection
• Prevents hose separation that can cause water leaks or puddling under the washer
• Keeps the drain hose aligned to allow consistent water flow during drain cycles
• Useful when the original clamp is corroded, cracked, or no longer holds tension

• Intended for use inside the washer cabinet at the tub outlet; access may require removing panels
• Disconnect power and water supply before beginning any repairs
• Use pliers or the appropriate clamp tool to remove and install the clamp without damaging the hose
• Replace the hose before installing the new clamp if you see hose damage.

Washer not draining or leaking water? This internal drain hose connects your tub to the pump. Replace a cracked or clogged hose to restore drainage.

This clamp secures the internal drain hose to the pump inlet, helping stop leaks and keeping the drain connection tight. It's a direct-fit replacement used on compatible GE washers/dishwashers. What it does:

• Holds the internal drain hose firmly to the pump inlet to prevent water leaks
• Helps maintain proper drain flow by keeping the hose seated and sealed
• Can reduce vibration-related loosening of the hose connection
• Addresses common symptoms like water pooling under the appliance, leaks from the pump area, or intermittent draining issues

• One internal drain hose clamp for the pump inlet

• Disconnect power and water supply before attempting any service
• Access may require removing the appliance front or rear panel
• Verify hose position and seating before tightening the clamp; avoid over-tightening which can damage hose

This hose clamp secures an internal drain hose-to-hose connection to stop leaks and keep the washer's drain path sealed. It's a simple replacement that restores a tight hose joint inside the cabinet. What it does:

• Secures the connection between two internal drain hoses or an internal hose and adapter to prevent water bypass.
• Helps stop water leaks that can appear inside the washer or under the appliance near the drain area.
• Keeps the drain path sealed so the washer can pump water out properly.
• Fits where a small, factory-style clamp is required rather than a worm gear or zip tie.

• Disconnect power to the appliance before accessing internal components.
• Turn off the water supply and drain remaining water before removing hoses.
• Use suitable pliers or a screwdriver to remove the old clamp and seat the new clamp evenly; avoid over-tightening.

Connects drain hose to washer outlet for secure wastewater flow. Replace if leaking or damaged to prevent spills. Confirm fit with your model number.

External drain hose clamp keeps the appliance's external drain hose firmly attached to the pump or drain outlet, preventing leaks and hose disconnection. Replacing a worn clamp restores a secure, leak-free hose connection. What it does:

• Secures the external drain hose to the pump or drain outlet to help prevent leaks and accidental disconnection.
• Helps maintain proper drainage; a loose or damaged clamp can allow water to leak during drain cycles or let the hose slip free.
• Common replacement when the clamp corrodes, breaks, or no longer tightens reliably.

• Disconnect power and turn off water before servicing to avoid electrical shock and water damage.
• Remove the old clamp, position the replacement over the hose connection, and tighten with the appropriate tool (pliers or screwdriver) until snug—do not overtighten.
• Restore water and power, run a short drain cycle, and inspect the connection for leaks. Replace the hose if damage is found.

Cabinet-leveling caster wheel that supports the washer and allows rolling for cleaning or service. Replace if worn, broken, or missing to restore mobility.

Replace damaged, cracked, or missing washer leveling legs. These adjustable feet level and stabilize your washing machine on uneven floors.

This front roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear for more reliable drying. It replaces a worn front drum support to restore steady, quiet operation. What it does

• Supports the front of the dryer drum so it spins on a stable axle.
• Reduces squeaking, thumping or rubbing noises caused by worn rollers.
• Prevents drum wobble that can lead to uneven drying or belt wear.
• Restores smooth rotation when the roller surface or bearing is worn.

• One front roller assembly

• Disconnect power before starting any repair; follow all safety precautions.
• Remove the dryer front or access panel and lift the drum slightly to replace the roller.
• Inspect the drum, glides, belt and other rollers for wear while repairing.
• Use common hand tools; keep fasteners for reassembly and test the drum rotation before finishing.

This caster screw is the replacement fastener that secures an appliance caster or leveling wheel to the cabinet, restoring proper attachment for safe, stable movement. Use it when the original screw is lost, stripped, or damaged. What it does:

• Secures the caster or leveling wheel to the appliance cabinet so the wheel stays firmly attached
• Helps stop wobbling or rocking caused by a loose or missing fastener
• Restores smooth rolling and prevents scraping or catching during movement
• Maintains proper cabinet alignment and load support at the wheel location

• Unplug the appliance and remove contents or secure heavy shelves/drawers before working near casters
• Support the appliance with a jack or blocks to relieve weight from the caster before removing/installing the screw
• Use the correct screwdriver or socket to avoid stripping the head; tighten securely but avoid over-torquing

Washer not responding to controls or cycles won't start? This control connector restores electrical communication between the control board and components.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.