Parts for Ge GNW128PSM0WW: Tub & Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This rod and spring assembly restores the pivot and return tension for the appliance component, helping moving parts return to position and operate smoothly. Replace a worn assembly to address binding, sagging, or poor return action. What it does:

• Provides the pivot rod and return spring that restore tension and controlled movement
• Replaces worn, bent, or broken rod/spring hardware that can cause sticking or loose operation
• Helps components return to their resting position and stay properly aligned
• Commonly used where a small rod and spring deliver return action and secure positioning

• Disconnect power and shut off fuel before starting any repair
• Use basic hand tools; note orientation and order of removal so reassembly matches the original
• Handle edges and springs carefully — wear gloves and eye protection to avoid injury

This impeller mounting bolt and washer kit secures the washer/dryer or dishwasher pump impeller to the motor shaft, keeping the impeller aligned and preventing wobble or separation during operation. Designed for direct replacement to restore pump function. What it does:

• Fastens the pump impeller to the motor shaft so the impeller turns with the motor
• Prevents the impeller from loosening, reducing leaks, noise, and reduced water movement
• Helps restore normal pump performance when a worn or missing fastener allows slippage

• One impeller mounting bolt and matching washer

• Replace only when the pump is disassembled or impeller is being serviced
• Disconnect power and water before starting work to avoid shock or flooding
• Tighten to the manufacturer's specified torque if available; avoid over-tightening which can strip threads
• If other pump components show wear or damage, inspect and replace as needed for reliable operation

This replacement door gasket creates a tight seal to help maintain appliance temperature and prevent air or moisture leaks for reliable operation. It restores sealing performance to reduce energy loss and keep contents at the correct temperature. What it does:

• Seals the door to prevent cold/hot air from leaking in or out
• Helps maintain consistent internal temperature and efficiency
• Reduces frost buildup and moisture migration that can affect performance
• Quietly restores a proper fit to stop drafts or uneven door closing

• Disconnect power to the appliance before beginning any work
• Remove the old gasket and clean the mounting surface thoroughly before installing
• Fit the gasket evenly around the door; follow OEM alignment and seating steps

This tapping screw secures appliance panels and components where threads are formed in-place. It provides a fast, reliable hold for sheet metal and plastic mounting points during repairs or assembly. What it does:

• Cuts threads into sheet metal or molded plastic as it is driven, eliminating the need for pre-tapped holes
• Secures panels, brackets, or small components to the appliance chassis
• Commonly used where vibration resistance and a tight fit are needed
• Can resolve loose panels, rattling parts, or components that pull free from thin mounting surfaces

• One tapping screw

• Use the matching driver bit and steady pressure; do not overtighten to avoid stripping or breaking the screw
• Start straight and drive at low speed to ensure proper thread formation
• Wear eye protection and disconnect power to the appliance before working on electrical areas
• Replace with the same screw type and size to ensure proper fit and safety

Replacement lint filter that fits the dryer's lint trap to capture fibers and debris, helping keep the vent clear and maintain drying performance. Easy to remove for cleaning and periodic replacement. What it does:

• Captures lint and fabric fibers before they enter the vent system.
• Helps maintain efficient drying by preventing lint buildup in the airflow path.
• Can reduce lint-related odors and the risk of restricted airflow when used and cleaned regularly.
• Replace when the screen is torn, warped, missing, or no longer traps lint effectively.

• Disconnect power to the dryer before inspecting or servicing the lint trap area.
• Slide the filter into the lint trap housing until fully seated; no special tools typically required.
• Clean the lint trap housing and surrounding area before installing the new filter.
• Do not operate the dryer without a lint filter in place.

This lint filter housing is the dryer inner frame that holds the lint screen and channels airflow through the filter area to help trap lint and protect internal components. It restores a secure fit for the lint screen and helps maintain airflow. What it does:

• Holds and secures the lint screen so it seals properly in the dryer opening
• Channels dryer airflow through the lint screen to trap lint before it reaches the blower
• Prevents loose lint from entering internal components and venting system
• Can reduce symptoms like poor drying performance, excessive lint in the cabinet, or rattling/misaligned filter

• One lint filter housing

• Disconnect electrical power (and gas supply on gas dryers) before servicing
• Remove lint screen and follow dryer disassembly steps for access; sharp sheet-metal edges may be present
• Replace damaged or torn lint screens and clean surrounding lint build-up while the housing is replaced

This overflow pipe routes excess water from the appliance to the drain to prevent pooling and water damage. Durable molded tube designed to fit the OEM drain pathway and restore proper water flow. What it does:

• Directs overflow or condensate to the drain to prevent standing water in the appliance base
• Helps stop puddling and dripping that can lead to floor damage or secondary leaks
• Replaces damaged, cracked, or clogged drain tubing that causes improper drainage
• Restores intended water routing so the appliance can manage excess water as designed

• Disconnect power and shut off water supply before beginning service
• Remove appropriate access panels to reach the old pipe; keep track of fasteners and clamps
• Slide pipe into place and secure all clamps or fittings; confirm proper routing to avoid kinks
• Check for leaks after reconnecting water and power; replace clamps or seals if needed

This drive motor assembly powers the appliance's rotating components to restore proper movement and operation. It replaces a worn or failed motor to stop grinding, stalling, or no-rotation problems and get the unit turning again. What it does:

• Provides rotational force for the appliance's driven components.
• Restores normal rotation when original motor hums, stalls, or won't start.
• Helps eliminate intermittent operation caused by a failing motor.
• Works as the direct replacement motor assembly for the drive function.

• Disconnect power to the appliance before beginning any service to avoid shock hazard.
• Typical installation requires basic hand tools; support the drum/assembly while removing and installing the motor.
• Inspect mounting hardware and wiring; replace any damaged clips or connectors.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

A rubber/foam cushion that mounts around the dryer drive motor to reduce vibration and help prevent motor-to-shroud contact. Replaces hardened or damaged insulation to restore quieter, stable motor operation. What it does

• Cushions the drive motor to minimize vibration and motor movement during operation
• Helps prevent the motor housing from rubbing against the cabinet or shroud
• Can reduce squeaks, rattles or thumping tied to a loose or worn motor mount area
• Protects the motor from direct metal-to-metal contact that can cause wear

• One drive motor insulator

• Disconnect power before servicing; ensure the appliance is fully unplugged or breaker is off
• Access requires removing the dryer cabinet or rear access panel per the model's service instructions
• Inspect surrounding mounts and fasteners; replace any damaged hardware for best results

A replacement V-belt that transfers motor power to the dryer drum so clothes tumble properly. Replacing a worn or broken belt restores drum rotation and helps eliminate squealing, slipping, or drums that won't turn. What it does:

• Wraps around the dryer drum and motor pulley to drive drum rotation.
• Replaces frayed, glazed, or snapped belts that cause slipping or stopped tumbling.
• Stops common symptoms like loud squealing, slow or uneven drum rotation, and belts that appear visibly damaged.
• Works with the dryer's idler and motor pulley to maintain proper belt tension and drum tracking.

• Always disconnect electrical power before beginning service; shut off the gas supply first on gas dryers.
• Access method varies by model—some units require removing the front or rear access panel or top panel.
• Note the belt routing before removal and route the new belt around the drum and pulleys.
• Inspect the idler/tensioner, drum rollers, and pulleys while replacing the belt and replace any worn components to prevent repeat failures.

A small metal split pin that secures shafts, linkages and other components to keep parts from sliding off while allowing easy removal for service. Simple, durable hardware used in many appliance assemblies. What it does:

• Holds shafts, levers and fasteners in place to prevent unintended movement or disassembly
• Keeps nuts, washers and linkages from backing off under vibration
• Common symptom: loose, missing or damaged pin causing rattling, wobble or detached parts
• Replaces worn or bent pins that no longer lock components securely

• Disconnect power (or gas) and follow appliance safety procedures before servicing
• Access the pin by removing the appropriate panel or assembly per your model's service instructions
• Remove bent or damaged pin with pliers; spread the split ends to free and slide the new pin into place, then bend the tails as required to secure
• Replace with an identical pin size and type; discard severely corroded or deformed pins

This drain/mode shift motor replaces the dryer washer assembly that shifts the unit between drain and drive modes, restoring proper cycle transitions and helping the appliance complete drain and spin steps. Useful when shifting or draining fails. What it does:

• Engages mechanism that selects drain vs. drive modes during cycles.
• Moves internal shift components so the machine can switch between spin/drain functions.
• Can resolve symptoms like failure to shift into spin, stuck in drain mode, or incomplete cycle transitions.
• Works with the appliance's control and transmission to coordinate mode changes.

• Disconnect power before starting to avoid shock—follow OEM service manual for access.
• Typical install requires opening the cabinet and removing control/transmission fasteners; handle connectors carefully.
• Inspect electrical connectors and mounting surfaces for damage; replace any damaged clips or screws.

This drain/mode shifter bolt secures the washer's mode shifter assembly so the transmission can move between wash, drain and spin positions. Replacing a damaged or missing bolt restores reliable shifting and reduces drivetrain play. What it does:

• Anchors the mode/drain shifter assembly to the transmission or cam so gear selection operates correctly
• Helps ensure the washer shifts into drain and spin cycles without slipping or binding
• Addresses symptoms like the machine getting stuck in a single cycle, noisy shifting, or excessive shifter movement
• Works as a replacement fastener when the original bolt is worn, stripped or corroded

• One drain/mode shifter bolt

• Disconnect power to the appliance before any repair; ensure the washer is unplugged and water supply is off if accessing internal components
• Access may require removing the washer cabinet or console; follow manufacturer service manual steps for safe disassembly
• Use correct-size tools and torque to avoid stripping the bolt or damaging surrounding parts
• If the shifter assembly shows additional wear or damage, inspect related components and replace as needed

This replacement belt protector bolt secures the dryer belt protector to the cabinet, keeping the belt aligned and shielded during operation. Durable metal construction restores proper routing and helps prevent belt wear or rubbing. What it does

• Fastens the belt protector to the dryer frame to maintain correct belt position.
• Prevents the belt from contacting sharp edges or rubbing against the cabinet.
• Helps reduce noise and premature belt wear caused by a loose protector.
• Small OEM fastener designed to match factory fit and function.

• One belt protector bolt.

• Disconnect power to the appliance before starting any repairs.
• Requires basic hand tools (screwdriver or socket) to remove/install.
• Hand-start threads and tighten securely; avoid over-tightening to prevent stripping.
• Verify belt alignment and protector position before restoring power and testing.

This outer harness protective cover is a replacement protective sleeve that protects the appliance wiring harness from abrasion, heat and wear to help maintain safe wire routing and reliable electrical connections. What it does:

• Shields the wiring harness from rubbing, chafing and minor heat exposure
• Helps prevent insulation damage that can lead to exposed wires or shorts
• Keeps harness routing neat to reduce strain on connectors
• Can reduce intermittent electrical faults caused by damaged or pinched wires

• Disconnect power to the appliance before starting any repair.
• Access the harness by removing the service panel or back cover as required by your model.
• Slide the cover over the harness or replace the damaged section; secure per OEM routing and clips.

This ground screw secures a chassis or component grounding conductor to the appliance frame, restoring a reliable earth connection for safety. It's a direct-fit fastener commonly used where the cabinet ground or wire terminal needs reattachment. What it does:

• Provides a secure point to attach the appliance ground wire to the cabinet or chassis.
• Restores or maintains electrical grounding to help prevent shock hazards.
• Used when original screw is missing, damaged, or corroded and ground continuity is compromised.
• Compatible with typical appliance sheet-metal grounding points.

• Turn off and disconnect power before inspecting or working on appliance wiring or grounding connections.
• Use appropriate screwdriver and tighten until snug; avoid over-torquing which can strip threads or damage sheet metal.
• Verify ground continuity with a multimeter after installation and restore any protective panels before powering appliance.

This motor protective cover shields the appliance motor from lint, debris and incidental contact to help prevent damage and maintain reliable operation. It's a simple replacement part that restores the motor's protective barrier. What it does:

• Covers and protects the motor housing from lint, dust and loose debris
• Helps prevent accidental contact with motor components during service
• Reduces the chance of foreign objects interfering with motor operation
• Restores the original protective enclosure after motor or cabinet service

• One motor protective cover

• Disconnect power to the appliance before accessing internal components
• Remove the appropriate access panel or housing to reach the motor area
• Replace the damaged cover with the new cover, ensuring proper alignment and secure attachment
• Replace broken fasteners or mounting clips before returning the appliance to service

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.