Parts for Whirlpool BRS62CBBNA01: 01 - Cabinet Parts

This refrigerator roller supports the unit's weight and enables smooth movement for positioning and cleaning. Replace when wheels crack or roll roughly.

Replacement 1/4-20 mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is missing, stripped, or lost.

Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.

Replacement roller axle support shaft for refrigerators. Installs to support rotating assemblies. Replace when worn, damaged, or causing wobble.

Steel rivet fastener for refrigerator panels and trim. Secures loose cabinet components and internal brackets. Replace when cracked, missing, or worn.

Secures the axle to keep rotating parts aligned in your ice maker. Replace if worn or broken to reduce noise and vibration. Confirm fit by model number.

Replace a cracked, broken, or missing refrigerator mounting bracket. Secures internal components, restores firm support, and reduces rattling.

Adjustable leveling leg for refrigerators and freezers. Installs at base corner to stabilize appliance on uneven floors. Replace if broken or stripped.

This genuine replacement screw secures appliance panels and components where a 12-24 thread fastener is required, restoring proper fit and reducing rattles or loose parts. Easy swap to get panels tight again. What it does:

• Fastens panels, brackets, and internal components that use a 12-24 threaded screw
• Restores secure mounting when original screws are stripped, lost, or corroded
• Helps eliminate vibration-related noise from loose parts
• Works wherever a 12-24 x 1/2 in. screw is specified by the manufacturer

• One 12-24 x 1/2 in. screw

• Use the matching screwdriver or nut driver to avoid stripping the head
• Do not overtighten; stop when the part is snug and seated to prevent damage
• If replacing a stripped or damaged hole, inspect mating threads and repair as needed
• Disconnect power to the appliance before accessing internal components

Secures door hinge to cabinet for proper alignment and sealing. Replace if missing, stripped, or loose to restore smooth operation. Confirm fit by model.

Fix a refrigerator that's not dispensing water or making ice with a new water inlet valve. Common repair for water supply issues. DIY install.

White door hinge for side-by-side refrigerators. Replace this structural component if cracked, broken, or worn to properly secure refrigerator door.

Gray door hinge for side-by-side refrigerators. Replaces cracked, broken, or worn hinges that cause misalignment or sagging doors.

White door hinge for side-by-side refrigerators. Serves as the pivot point for smooth door operation. Replace if loose, misaligned, or broken.

The Hinge-Door is an OEM part for Whirlpool refrigerators. The refrigerator door hinge is a crucial component that allows the door to properly open and close while securely holding it in place. These hinges are responsible for smooth and reliable door operation through thousands of openings and closings. 

Causes of a bad hinge can include wear and tear from prolonged use, stress from overloading the door, or accidental impact damage. 

Symptoms of a bad hinge include:

• The door not closing properly or staying fully shut  
• Difficulty or resistance when opening/closing the door
• The door sagging or wobbling excessively
• Noise or grinding sounds coming from the hinge area

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replacement screw that fastens panels, brackets, and internal components. Install when original is stripped, rusted, missing, or lost during repairs.

White door hinge for side-by-side refrigerators. Replaces cracked, broken, or missing hinges that support and align the refrigerator door properly.

Replace your refrigerator's grey door hinge if it's cracked, broken, or worn. This structural component secures the door for proper alignment and operation.

This door hinge supports and pivots the appliance door for smooth, aligned opening and closing. Replacing a worn hinge restores proper closing and helps the latch and door seal make consistent contact. What it does:

• Provides the pivot point and structural support for the door
• Maintains door alignment for correct latch engagement and seal contact
• Helps prevent binding, sagging, uneven movement, and squeaks
• Common fix for doors that won't close fully or feel loose/wobbly
• Replaces hinges that are bent, cracked, or show excessive play

• 1 door hinge

• Disconnect power (and shut off gas/water if applicable) before servicing
• Support the door to prevent strain; removal may be required to access the hinge
• Remove hinge cover/trim and mounting screws; transfer any hardware to the new hinge
• After installation, verify alignment and closure; adjust as needed for proper latch and seal contact

Replaces worn or broken refrigerator door hinge cam. Restores smooth door pivot and secure closing. Essential when cam is cracked or door misaligns.

This door hinge supports and pivots the appliance door for smooth, aligned opening and closing. Replacing a worn hinge restores proper closing and helps the latch and door seal make consistent contact. What it does:

• Provides the pivot point and structural support for the door
• Maintains door alignment for correct latch engagement and seal contact
• Helps prevent binding, sagging, uneven movement, and squeaks
• Common fix for doors that won't close fully or feel loose/wobbly
• Replaces hinges that are bent, cracked, or show excessive play

• 1 door hinge

• Disconnect power (and shut off gas/water if applicable) before servicing
• Support the door to prevent strain; removal may be required to access the hinge
• Remove hinge cover/trim and mounting screws; transfer any hardware to the new hinge
• After installation, verify alignment and closure; adjust as needed for proper latch and seal contact

Replaces worn or broken refrigerator door hinge cam. Restores smooth door pivot and secure closing. Essential when cam is cracked or door misaligns.

Replacement mounting screw for refrigerator panels, brackets, and internal components. Replace missing or stripped screws to restore secure fit.

Replaces missing or damaged corner trim filler on your refrigerator. Restores a clean, finished look to interior or exterior cabinet seams and edges.

White base grill (toe kick) for the lower front of your refrigerator. Replaces a cracked, faded, or missing panel to restore a finished look.

Covers the lower front of your refrigerator in midnight gray. Replaces cracked, broken, or missing grilles to restore airflow and a finished look.

This cam door replaces the small plastic cam that guides and supports the appliance door mechanism, restoring proper door alignment and secure closing so the appliance can latch and operate reliably. What it does:

• Guides the door or door strike into the correct position during closing
• Helps the latch engage so the appliance recognizes the door as closed
• Replaces worn, cracked, or broken cams that cause misalignment or noisy operation
• Can stop symptoms such as a door that won't seat, rattles when closing, or prevents the appliance from starting

• One cam door (single replacement cam)

• Disconnect power (and water if applicable) before starting any repair
• Remove the door or access panel per your model's service instructions to reach the cam
• Verify cam orientation and engagement with the latch/strike before final assembly

Mounts at the bottom hinge to raise and lower the refrigerator door as it swings. Replace if cracked, worn, or broken to restore smooth self-closing.

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Replaces the refrigerator water inlet tube that routes water from the inlet valve to the internal water system. Order a new tube if cracked or leaking.

Routes water from the filter housing to the outlet. Replace if cracked, kinked, leaking, or broken to restore proper water flow and prevent leaks.

Fix water leaks or drips from hose connections with this refrigerator water line fitting. Restores a secure, leak-free seal at inlets and outlets.

Replace a cracked, broken, or missing refrigerator mounting bracket. Secures internal components, restores firm support, and reduces rattling.