Parts for Electrolux EFLS527UIW2: Cabinet / Top Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

The Door Lock is an OEM part for Frigidaire front-loading clothes washers. It secures the washer door safely shut during cycles to prevent accidental opening.

Causes of a bad door lock can include normal wear of moving components, broken or cracked locking arms from repeated use or forced openings, or failure of electronic components controlling the lock function.

Symptoms of a failed door lock include:

• Inability to latch or remain securely closed during operation
• An unlocked door that could open unpredictably during cycles
• Fault codes displayed related to door issues
• Lock not releasing at the appropriate time

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

This replacement screw secures appliance panels and internal components. A fresh fastener helps keep assemblies tight and aligned, reducing rattles and vibration so parts stay properly mounted during everyday use.

• Fastens panels, brackets, and assemblies to the appliance frame
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration, rattling, and loose-fitting components
• Symptoms of a bad/missing screw: loose or noisy panel, component won't stay attached, stripped head/threads

• Disconnect power before servicing; turn off water supply if working on a washer
• Replace one screw at a time to maintain alignment and track locations
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to prevent stripping threads or heads

This inner oven door glass restores the viewing window and helps contain heat inside the cavity for even cooking. Use when the door glass is cracked, broken, cloudy, or otherwise damaged to restore safe, usable viewing. What it does:

• Replaces cracked, chipped, shattered, or cloudy inner oven door glass.
• Restores a clear view of the oven interior so you can monitor cooking without opening the door.
• Helps maintain the oven's sealed cavity to reduce heat loss during cooking.
• Prevents loose or broken glass from falling into the oven cavity.

• Allow the oven to cool completely and disconnect power before starting service.
• Handle glass with heavy gloves and eye protection; broken glass can be sharp.
• Reinstall or replace any door screws, brackets, or gaskets exactly as removed; follow the oven manufacturer's service instructions.

The Washing Machine Door Latch is an OEM part for Frigidaire washing machines. This part ensures the door of the washing machine closes securely and remains locked during operation, providing safety and preventing water from leaking out. 

Causes of a bad door latch can include physical damage, such as cracks or breakage, which can occur from the door being slammed or closed too forcefully. 

Symptoms of a bad Washing Machine Door Latch & Receiver include:

• The door not closing or locking properly
• The washing machine not starting due to the door not being recognized as closed
• Water leaking from around the door
• An error message or indicator light signaling a door latch issue

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Hinge Assembly is an OEM replacement part for Frigidaire washing machines. It is the mechanism that allows the washer door to open and close properly. 

Symptoms of a bad hinge assembly include:

• Loose, wobbly, or unstable door movement  
• Difficulty latching or sealing the door fully shut
• Excessive noise or vibration from the hinge area 
• Misaligned or warped door position

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This genuine replacement screw secures appliance panels and components so they stay tightly mounted and aligned during normal use. It's a simple, direct fix when a loose or missing screw causes rattling or parts that won't stay in place. What it does:

• Replaces a stripped, damaged, or missing mounting screw used on trim, panels, or brackets
• Restores secure fastening to stop panel vibration, gaps, or rattling noises
• Matches OEM fit and fastening function for proper alignment
• Used where a short machine screw is required for cabinet or component attachment

• One screw

• Use the correct driver size to avoid stripping the head; turn until snug — do not overtighten
• Replace only the exact screw location and type called for in the service guide
• Disconnect power or follow appliance-specific safety steps if working near electrical or moving parts
• Replace all matching fasteners for even support

The front panel clip is an OEM replacement part for Frigidaire washing machines. It is a small but crucial component that helps secure and hold the front panel or control panel in place on the washer. These clips are typically located at the top or sides of the front panel, snapping or clipping into place to provide a secure and stable fit.

Causes of a bad front panel clip can include physical damage from impact or mishandling, wear and tear over time, or exposure to moisture or excessive heat. A broken or missing clip can cause the front panel to become loose or detached, potentially affecting the proper functioning of the washer's controls or creating safety hazards.

Symptoms of a bad front panel clip include:

• The front panel feeling loose or unstable
• The panel not sitting flush against the washer body
• Difficulty in properly aligning or attaching the front panel
• Visible damage or missing clips

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washer models.

Replacement mounting screw that secures panels, brackets or small components in compatible appliances. Installs quickly to replace stripped or missing fasteners and help stop rattling and restore proper alignment. What it does:

• Fastens panels, trim pieces, brackets and other small assemblies to the appliance.
• Replaces stripped, corroded or broken screws that can cause loose parts or vibration noise.
• Helps restore proper alignment of doors, drawers or trim when a missing screw allows movement.
• Small appliance fastener sized for original mounting points—use the OEM screw whenever possible.

• Disconnect power and water before starting any repair.
• Start the screw by hand to avoid cross-threading; use the correct screwdriver or bit.
• Tighten snugly but avoid overtightening to prevent stripped threads or damaged plastic.

This metal top panel replaces the upper rear control housing on compatible Frigidaire ranges and stoves, restoring a secure mounting surface for controls and improving cabinet fit and appearance. Ideal for repairing bent, rusted, or damaged panels. What it does

• Replaces the upper rear housing that supports control knobs, switches and the backguard area
• Restores proper alignment and spacing between the cooktop and rear controls
• Stops light leaks and relieves stress from warped or bent panels
• Commonly used when the panel is dented, rusted, cracked, or has broken mounting tabs

• One top panel

• Disconnect power (and gas, if applicable) before starting any work
• Handle sharp sheet-metal edges with gloves; panel edges can be sharp
• Remove control knobs, backguard, or trim as required and save screws for reinstallation
• Align mounting tabs and secure with original hardware; test controls after reassembly

This top panel in white restores the oven/stove's upper exterior, improving appearance and protecting internal components from spills and debris. It's a direct-replacement exterior shell piece designed to match original fit and finish. What it does:

• Replaces a cracked, warped, dented, or discolored upper cabinet panel
• Protects control housing and internal components from grease, spills, and dust
• Restores a flush, finished look to the appliance top and backguard area
• Helps maintain proper alignment for control and trim pieces

• Disconnect power to the appliance before beginning any work
• Typical removal requires removing screws and lifting the old panel straight out; keep mounting hardware
• Handle edges carefully to avoid cuts and protect the painted finish during installation

The Front Panel is an OEM replacement part for Frigidaire washing machines. It is the outer panel that forms the front exterior of the washer cabinet, housing the control panel and door.

Causes of a bad Front Cabinet Panel can include physical damage from impact or mishandling, warping or discoloration due to exposure to heat or moisture, and general wear and tear over time.

Symptoms that may indicate a need to replace the Front Cabinet Panel include:

• Visible cracks, dents, or scratches on the panel surface
• Discoloration or fading of the panel material
• Panel becoming loose or detached from the washer cabinet
• Difficulty in opening or closing the washer door due to panel misalignment

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.

This control panel is the exterior console trim that secures and presents the refrigerator's user controls, restoring a finished appearance and protecting the internal switch assembly. It replaces cracked, warped, or cosmetically damaged panels. What it does:

• Covers and protects the control switches and display area from spills and debris
• Provides the finished bezel and button openings for the user interface
• Restores a clean, secure mounting surface if the original panel is cracked or loose
• Helps prevent accidental contact with internal wiring and components

• Disconnect power to the appliance before starting any work
• Remove any trim pieces or fasteners holding the old panel; handle gently to avoid chipping
• May require basic hand tools (screwdriver, nut driver); retain removed hardware for reassembly

The Power Cord is an OEM part for Frigidaire washers. It provides the electrical connection between the washer and the outlet to provide voltage to the washer.

A bad power cord can be caused by frayed wires, damage to the plug or connector, or wear and tear over time. Signs of a faulty power cord include intermittent power loss, sparks or electrical arcing, or a loose connection.

Symptoms of a bad power cord can include:

• The washer not powering on 
• Sparks or electrical arcing 
• A loose or unstable connection 
• Visible damage or fraying 

Replace your worn-out or damaged power cord with this genuine OEM part to restore to your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

The Leveling Leg is an OEM part for Frigidaire washing machines. These legs are designed to securely hold the washer in place while allowing adjustable height for proper leveling on uneven surfaces.

Causes of a bad leveling leg can include threads stripping or seizing due to regular height adjustments over time, as well as cracks or breaks from heavy loads or impacts.

Symptoms of a faulty leveling leg include:

• Excessive vibrating or horizontal movement of the washer during spin cycles
• Bowing or sagging of the washer cabinet
• Draining or filling issues due to improper drainage angle
• Premature component wear from long term poor leveling

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement refrigerator door magnet helps the door stay tightly closed so the appliance maintains proper temperature and efficiency. It restores the magnetic seal that keeps cold air in and warm air out. What it does:

• Replaces a worn or broken door magnet to improve door sealing and reduce temperature loss
• Helps stop frequent compressor cycles caused by a poor seal
• Can reduce frost buildup and prevent food spoilage related to a leaking seal
• Works with the door gasket to maintain proper closing force

• Disconnect power to the appliance before starting any repair
• Clean the magnet channel and surrounding area so the magnet seats properly
• Press or slide the magnet into place; some applications use clips or adhesive—verify fit before final installation

The Suspension Spring Bushing is an OEM part for Frigidaire washing machines. This part aids the suspension springs in absorbing vibrations and stabilizing the tub during operation. The bushings ensure that the movement is smooth and the noise levels are minimized.

Causes of a bad suspension spring bushing can include regular wear and tear from the constant load and movement, material fatigue, or improper installation that may accelerate deterioration. 

Symptoms of a bad suspension spring bushing include:

• Increased vibration or shaking of the washer, especially during the spin cycle
• Unusual noises like banging or thumping indicating the tub is not properly balanced
• Excessive movement or "walking" of the machine during use
• Wear and tear visible on the bushing, such as cracking or hardening of the material

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This dampener regulates airflow inside the refrigerator to help steady temperatures between compartments and reduce temperature swings. It replaces a worn or broken air control piece to restore proper circulation and consistent cooling. What it does:

• Controls airflow between fridge compartments to help maintain even temperatures
• Helps reduce warm or cold spots caused by stuck or broken dampeners
• Minimizes rapid temperature changes when doors open and close
• Operates quietly as part of the internal air distribution system

• Disconnect power to the appliance before starting any repair
• Basic hand tools may be required; handle plastic parts carefully to avoid breakage
• Verify correct orientation and secure mounting for proper airflow operation

This screw is a direct-replacement fastener used to secure appliance panels and components. It provides a simple, reliable fix when a missing or damaged screw lets parts sit loose or vibrate. What it does:

• Secures service panels, trim pieces, brackets, or small components
• Restores proper fit and alignment to reduce rattling or movement
• Replaces stripped, missing, or corroded screws to maintain safe assembly
• Works wherever the OEM screw specification is required for reliable fastening

• Use the correct driver bit and turn gently to avoid stripping the head
• Ensure mating threads are clean and aligned before tightening
• Tighten until snug; do not over-torque to prevent damage to threads or parts
• Disconnect power before working near electrical components or controls

The Bracket is an OEM part for Frigidaire washing machines. This bracket provides the necessary support and pivot point for the washer door to open and close smoothly. 

Causes of a bad bracket can include mechanical stress from constant use, accidental impacts that can bend or break the bracket, or corrosion due to exposure to moisture and detergent residues.

Symptoms of a bad bracket include:

• Difficulty opening or closing the washer door
• A door that hangs unevenly or seems loose
• Squeaking or other noises when the door is moved
• Visible wear or damage to the bracket

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Pin is an OEM part for Frigidaire washing machines. This part attaches the washer door to the body of the machine, ensuring it opens and closes smoothly and securely. The hinge pin plays a crucial role in maintaining the alignment and integrity of the door, which is vital for preventing leaks and ensuring proper operation.

Causes of a bad pin can stem from normal wear and tear due to repeated use, accidental stress if the door is forced or overloaded, or corrosion from exposure to moisture. 

Symptoms of a bad pin include:

• The washer door sagging or not closing properly
• Difficulty in opening or closing the door smoothly
• Noises such as scraping or squeaking when the door moves
• Visible wear or damage to the pin, such as bending or rusting

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This cabinet damper helps control the motion of a refrigerator cabinet or door assembly for smoother, more balanced movement and reduced slamming. It restores the intended counterbalance action when the original damper is worn or broken. What it does:

• Provides counterweight action to help a cabinet or door close smoothly and stay balanced
• Reduces sudden drops, slamming, and uneven door movement caused by a failed damper
• Works as the mechanical balance component within the cabinet/door hinge/damper system
• Commonly replaced when the door feels loose, drops unexpectedly, or does not stay in position

• One cabinet damper as pictured

• For safety, unplug the appliance or disconnect power before beginning work
• Basic disassembly of the cabinet/door trim or hinge may be required; follow OEM instructions
• Verify orientation and mounting location before removing the old part to ensure correct installation

This small plastic retainer clip secures trim and lightweight components so doors and shelves stay aligned and rattle-free. A simple replacement that restores proper fit where a broken or missing clip lets parts shift. What it does

• Fastens and aligns lightweight plastic trim, door, or shelf components
• Prevents movement and noise caused by a cracked or missing retainer
• Restores secure fit for loose or sagging trim pieces
• Commonly used where a push-in or snap-in fastener is required

• One retainer clip

• Inspect the mating slots or holes for damage before installing the new clip
• Push the clip into place until it snaps; the attached part seats securely
• No special tools typically required; use a flat tool to remove the old clip if needed
• Disconnect power only when working near electrical components or lighting assemblies

A small metal mounting screw used to secure appliance panels and internal components. Simple replacement that restores proper fit and reduces rattling or loose parts when the original fastener is missing or damaged. What it does

• Secures panels, brackets, or trim pieces to the appliance chassis
• Holds internal components in place to maintain alignment and function
• Helps prevent vibration noise and movement from loose parts
• Suitable where the OEM listed screw size and thread match the original

• Disconnect power and water before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Keep any removed screws organized to ensure correct reassembly

This is a Phillips pan head machine screw commonly used to secure panels and components in appliances. It provides a reliable, low-profile head for flush fastening and easy Phillips-driver installation. What it does:

• Fastens trim, panels, or internal components where a pan head screw is required
• Designed for secure grip in metal or threaded inserts compatible with #10-16 threads
• Helps prevent loosening from vibration when installed to correct torque
• Often used in refrigeration and major appliance assemblies in limited quantities

• One Phillips pan head screw (#10-16 x 5/8")

• Use the correct #2 Phillips driver and steady pressure to avoid cam-out or stripping
• Do not overtighten; stop when snug to avoid damaging threads or mating parts
• Replace only with an identical thread size and head style to ensure fit
• Wear safety glasses when working around sharp sheet metal and springs

Size: 6-20 x 0.312 inch.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.