Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
Replaces missing, stripped, or rusted 8-18 thread screws that secure dryer panels, brackets, and components for tight, rattle-free assembly.
The Motor Control is an OEM replacement part that fits Frigidaire washing machines. It is responsible for controlling and powering the washer motor during cycles. Over time, motor controls can fail due to electrical damage or corrosion. Causes of failure include damaged drive circuits, shorted windings, and burned out relays.
Symptoms of a bad motor control include:
The motor control is compatible with Crosley, Gibson, White Westinghouse, Kelvinator, and Kenmore washers.
Mounting screw for range bottom drawer assembly. Replaces lost, stripped, or damaged screws. 6-20 x 0.312 inch size. Essential hardware for drawer repair.
Replacement cover for front-load washers. Restores appearance and protects internal components when the original is cracked, broken, or missing.
Replacement cover for your front-load washer. Installs on the cabinet exterior to restore appearance. Order a new cover if yours is cracked or damaged.
Washer door won't lock or stay closed? This door lock secures your front-load washer during cycles. DIY repair takes 5-10 minutes with basic tools.
Replacement mounting screw for dryers. Secures panels, brackets, and internal components. Replace if stripped, missing, or corroded during repairs.
Replaces cracked, broken, or cloudy inner door glass on your laundry center. Restores clear viewing window and helps contain heat inside the cavity.
Washer door inner frame supports the door structure and hinge mounting. Replace if door is loose, sagging, or won't seal properly. Verify fit with model.
Usually ships within 4 - 14 days
Broken door latch preventing your washer from starting? This door latch secures and locks the door during cycles. DIY repair takes under 10 minutes.
Door hinge assembly for front-load washers. Connects door to cabinet, allowing smooth opening and closing. Replace if cracked, rusted, or wobbly.
Replacement mounting screw for dryers. Secures panels and internal components. Needed when original screw is stripped, damaged, missing, or causing loose parts.
Secures the front panel to your washer frame. Replace this clip if your panel is loose, rattling, or won't stay in place due to a broken or missing clip.
Mounting screw that secures panels, brackets, and components in dryers. Replace stripped, missing, or damaged screws to restore proper alignment.
Mounting screw for dryers and laundry appliances. Secures panels, brackets, and internal components. Replace if stripped, missing, or damaged.
Replacement mounting screw for washers and laundry centers. Secures internal components and panels. Order a new screw if original is lost or stripped.
Replace your washer's control panel if cracked, damaged, or worn. This panel houses the controls and display on the front of your washing machine.
White top panel for dryers. Replaces cracked, dented, or discolored exterior cover. Restores appearance and protects internal components.
Replace cracked or warped washer control panel trim. Restores finished appearance and protects internal switch assembly. Straightforward installation.
Washer won't power on or turn on? A faulty power cord with frayed wires or damaged plug may be the cause. Direct electrical connection replacement.
Protects the power cord where it passes through the washer cabinet. Replace if cracked, worn, or missing to prevent cord chafing and wire exposure.
Adjustable leveling leg threads into washer base to stabilize and level the cabinet. Replace worn, missing, or broken legs to prevent rocking and vibration.
Sleeve bearing bushing that supports rotating shafts in washers. Replace if worn, cracked, or causing noise. Reduces friction and centers components.
Replacement mounting nut that secures panels, trim, and internal components. Needed when original nut is stripped, corroded, missing, or lost during repair.
Suspension spring for front-load washers. Supports the drum and absorbs vibration during spin cycles. Replace if broken, detached, or stretched out.
Replace your worn refrigerator door magnet to restore proper sealing. Keeps cold air in and warm air out for better efficiency. Confirm fit with your model.
Front panel frame for washers. Replaces cracked, broken, or damaged exterior frame that supports the control panel and door assembly. Essential structural component.
Mounting bracket for front-load washers. Secures internal components in place. Replace if bracket is cracked, bent, broken, or missing hardware slots.
Suspension spring bushing absorbs vibrations and stabilizes the washer tub during operation. Replace if experiencing excessive noise or movement. Verify fit.
Sound dampening insulation that reduces vibration and noise in your washer. Replace if worn, torn, or missing to restore quiet operation and protect components.
Replacement mounting screw that secures panels, brackets, and trim pieces on your washer. Needed when original fasteners are missing, stripped, or damaged.
Structural bracket that supports the washer door hinge mechanism. Replaces broken, bent, or cracked brackets that prevent smooth door operation.
Door hinge pin attaches the washer door to the machine body for smooth opening and closing. Replace if cracked, bent, or missing to restore door alignment.
Rubber grommet cushion for laundry center washers. Isolates vibration and prevents wear where components pass through openings. Replaces worn or missing.
This small plastic retainer clip secures trim and lightweight components so doors and shelves stay aligned and rattle-free. A simple replacement that restores proper fit where a broken or missing clip lets parts shift. What it does
Mounting screw for washer cabinet and component assembly. Replace if screw is stripped, missing, or damaged during disassembly. Essential hardware piece.
Replacement mounting screw for dryers. Secures panels, brackets, and internal components. Order if your original screw is stripped, missing, or damaged.
Plastic hole plug for washer cabinet or panel. Covers unused mounting holes or ports. Replace if cracked, missing, or broken to maintain a finished look.
Fix intermittent power issues or component failures with this laundry center wiring harness. Restores electrical connections between components.
Secures internal washer components during transport to prevent damage from movement. Includes brackets and bolts needed when relocating your machine.
Secures the drum baffle (lifter vane) to your washer drum. Replace missing, stripped, or loose screws to keep baffles firmly attached and prevent rattling.