Parts for Electrolux EIFLS20QSW00: 03 - Cabinet / Top Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a replacement mounting bracket that secures and supports internal cabinet components and panels, restoring proper alignment and stability for safe operation. It's a direct-fit part when matched to the correct model. What it does:

• Provides a secure attachment point for panels, assemblies or trim to prevent shifting or sagging
• Restores proper alignment for doors, shelves or internal components that sit on or near the bracket
• Helps eliminate rattling, vibration or loose-feeling panels caused by a damaged or missing bracket
• Maintains correct spacing and support to ensure connected parts operate as intended

• One mounting bracket

• Installation requires removing exterior panels or nearby components; keep track of screws and fasteners
• Turn off and unplug the appliance before starting work to avoid injury
• Use basic hand tools; avoid overtightening fasteners which can deform the bracket or related parts

This mounting bracket secures internal appliance components to the cabinet or frame, restoring proper alignment and reducing movement. A simple replacement that helps stop rattling and maintains component stability. What it does:

• Provides a stable attachment point for panels, assemblies, or hardware
• Keeps covered parts aligned to prevent binding or wear
• Stops vibration-related noise caused by loose or damaged mounts
• Restores proper clearances for moving parts that rely on fixed supports

• Disconnect power (and water if applicable) before beginning any repair
• Remove access panels as needed to reach the damaged bracket
• Use the correct fasteners and torque to avoid stripping or stress

This mounting bracket secures internal components and assemblies in place to restore proper alignment and reduce movement. Use it to replace a broken or missing support that can cause loose panels, noise, or unstable parts. What it does

• Provides a secure anchor for appliance components to maintain correct alignment.
• Prevents rattling, vibration, or shifting that can occur with a damaged or missing bracket.
• Helps keep panels, housings, or internal modules properly seated during operation.
• Restores structural support to prevent further wear on attached parts.

• One mounting bracket.

• Disconnect power (unplug or shut off circuit) before starting any repair.
• Basic hand tools required; follow the appliance service manual for access steps.
• Inspect mounting screws and nearby parts; replace any damaged fasteners and avoid overtightening.

This holder is a small mounting bracket that secures internal components so they stay aligned and stable during normal use. It replaces a worn or broken bracket to help reduce movement and noise from loose parts. What it does:

• Provides a secure mounting point for the appliance's internal assembly to prevent shifting
• Helps stop rattling, vibration, or intermittent contact caused by a loose bracket
• Restores proper alignment of connected components for reliable operation
• Durable replacement for a cracked, broken, or missing holder

• One holder mounting bracket

• Disconnect power to the appliance before starting any repair
• Remove the outer panels or access covers required to reach the damaged bracket
• Retain all fasteners and note their original locations for correct reassembly

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This control panel is the factory-style replacement console trim that restores the appliance's front controls and appearance. It provides a precise fit and returns reliable button and display alignment for proper operation. What it does

• Replaces cracked, warped, or cosmetically damaged console trim so buttons and indicators line up correctly
• Restores stable button actuation and front-panel stability
• Helps stop erratic or unregistered button presses caused by a broken panel
• Keeps internal components protected from spills and debris around controls

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle panel carefully to avoid scratching the finish or damaging clips and tabs
• Installation typically requires removing a few screws and detaching retaining clips; keep hardware for reassembly

This door hinge secures and guides a refrigerator/freezer door so it opens and closes smoothly, restoring proper alignment and sealing. Designed to replace a worn or damaged hinge to help eliminate sagging, misalignment, or noisy movement. What it does:

• Supports the door pivot point so the door opens and closes reliably
• Restores correct door alignment to improve gasket sealing and temperature control
• Eliminates squeaks or binding caused by worn hinge surfaces
• Prevents further wear to door edges and cabinet trim from uneven movement

• Disconnect power to the appliance before starting and work with the door supported
• Use proper tools and hardware; keep track of any spacers or shims removed during disassembly
• Align hinge and door before tightening fasteners to avoid binding or gasket pinch

This catch secures a refrigerator or freezer door/drawer to help keep it closed, preserving temperature and preventing food spoilage. It replaces a worn or broken catch to restore proper door engagement and seal. What it does:

• Holds the door or drawer in the closed position to maintain the appliance seal
• Prevents the door/drawer from popping open during use or when bumped
• Helps reduce cold air loss that can lead to frost buildup or temperature fluctuations
• Addresses symptoms like a door that won't stay latched or a drawer that slides open unexpectedly

• One catch

• Disconnect power before servicing to avoid electrical hazards
• Inspect mounting area and fasteners; replace any damaged screws or clips
• Typically installs with simple snap-in engagement or a small screw—retain existing hardware unless damaged

This replacement access panel cover restores the cabinet appearance and helps protect internal components from dust and damage. It provides a finished look and maintains safe, reliable operation when the original cover is cracked or missing. What it does:

• Protects internal parts from debris, accidental contact, and wear
• Restores a secure, finished cabinet surface and helps reduce rattling noises
• Useful when the original cover is cracked, warped, or corroded
• Helps maintain proper airflow paths and component alignment when installed correctly

• One replacement access panel cover

• Disconnect power before servicing to avoid electrical shock
• Remove fasteners from the existing cover and transfer any retained clips or gaskets if present
• Align the new cover and secure with the original screws or clips; do not overtighten
• If other damage or missing retainers are found, inspect surrounding components and replace as needed

This door lock secures the appliance door during operation to help prevent accidental opening and ensure cycles run correctly. It replaces a worn or broken latch so the door closes and locks reliably. What it does:

• Physically latches and locks the door to keep it closed during cycles
• Prevents the appliance from starting or running if the door does not engage
• Commonly used when the door will not stay closed or the unit won't begin its cycle
• Helps restore proper door alignment and secure closure when the latch is damaged

• Disconnect power (and water, if applicable) before attempting service
• Basic hand tools typically required; for steps
• Inspect door strike and surrounding trim for damage when replacing the lock

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.