Parts for Electrolux EIFLS20QSW00: 02 - Control Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This push button replaces a worn, cracked, or missing control-panel button so your appliance's front controls are easy to press and responsive again. It restores user input for selecting cycles and settings. What it does

• Replaces a broken or missing control-panel push button used to select cycles, options, or settings
• Restores a firm, tactile press and reliable contact for the front control interface
• Helps fix buttons that stick, feel mushy, or no longer latch properly
• Compatible with snap-in/button-style control panels that accept this replacement

• Disconnect power to the appliance before attempting service to reduce shock risk
• Most installs are snap-in replacements accessible from the control panel; remove trim or panel as needed
• Use a non-marring tool or fingertip pressure to pry the old button out and press the new button into place

Tension spring restores proper door and mechanism movement in washers and dryers. Replace if door won't close smoothly or mechanisms feel loose. Verify fit with your model number.

This diffuser directs and spreads chilled air inside the refrigerator compartment for more even cooling and better food preservation. It replaces a worn or cracked diffuser to restore proper airflow distribution and reduce hot spots. What it does:

• Channels and diffuses cold air from the evaporator into the cabinet for more uniform temperatures
• Helps prevent localized warm spots that can cause premature food spoilage
• Restores proper airflow when the original diffuser is cracked, broken, or missing
• Reduces airflow noise caused by loose or damaged diffuser pieces

• Always unplug the appliance or shut off power at the breaker before servicing
• Typically installs without tools; may require removing shelves or trim to access the mounting area
• Handle the part carefully to avoid cracking the plastic during installation

This water inlet valve controls water flow into the refrigerator's dispenser and ice maker so you get reliable filling and ice production. Replaces a worn valve to restore normal water delivery and stop intermittent dispensing. What it does:

• Opens and closes to let water into the ice maker and dispenser when requested
• Prevents water flow when appliances are off or in fill cycle completion
• Common symptom: dispenser or ice maker not filling or producing small/slow amounts of water
• Common symptom: continuous water flow or leaking from valve area

• Turn off power and shut off the water supply before servicing
• Inspect and tighten water line fittings; replace damaged tubing or seals
• Use basic hand tools; verify electrical connectors are secure and undamaged

This water inlet valve controls the flow of water to the refrigerator's ice maker and/or dispenser, restoring proper water supply for ice production and dispensing. Replaces a failed or leaking inlet valve to stop leaks and restore function. What it does:

• Opens to allow water into the ice maker and dispenser when signaled by the fridge controls
• Stops water flow when closed to prevent continuous filling or overflow
• Commonly replaced for symptoms like no water dispensing, slow/weak dispensing, or no ice production
• Can reduce leaking from the back of the refrigerator when the existing valve fails

• Disconnect power and shut off the household water supply before starting
• Turn off the water and relieve pressure from the line before disconnecting fittings
• Inspect and replace any worn inlet hoses or seals to ensure a leak-free installation

If your washer overfills, underfills, or won't advance cycles, the pressure switch may have failed. This water level sensor uses air pressure sensing.

Structural support component for your washer. Installs inside the cabinet to provide stability. Replace if cracked, broken, or missing to restore proper support.

Fixes washer with no power, no lights, or unresponsive controls. This electronic control board manages all wash cycles and motor functions.

If your washer won't start, cycle properly, or complete its program, the main control board may have failed. This electronic board manages all wash functions.

This replacement flap is the airflow damper that helps direct and regulate cold air inside the refrigerator for consistent cooling. Replacing a cracked or stuck flap restores proper airflow and helps maintain even temperatures. What it does:

• Opens and closes to control airflow between compartments for proper circulation
• Prevents warm air from entering when closed, helping interior temperature stability
• Stops rattling or scraping noises caused by a broken or loose flap
• Helps ensure even cooling when the refrigerator cycles

• One replacement flap

• Disconnect power before starting any repair to avoid electrical shock
• Remove interior panels or shelves as needed to access the damper area; keep track of screws and clips
• Inspect surrounding ducts, hinges, and clips and replace any damaged fasteners for a secure fit

This conveyor assembly moves items along the appliance's internal track to enable smooth operation and reliable part movement. Replacing a worn or damaged conveyor restores proper transport and reduces binding or misfeeds. What it does:

• Translates motor motion into linear movement across the appliance's track or rack
• Helps maintain consistent item positioning during cycles
• Commonly linked to symptoms like items not advancing, grinding or scraping noises, and visible belt wear
• Supports related components that rely on steady travel for correct operation

• Disconnect power to the appliance before beginning any repair
• Follow OEM instructions for removal and installation
• Require basic hand tools; keep track of fasteners and alignment during reassembly
• If you see damaged mounting hardware or related parts, replace them to ensure secure installation

Washer siphon tube routes water to prevent pooling and ensure proper drainage. Replace if water collects or drains slowly. Confirm fit with your model.

Replace a cracked or clogged syphon assembly that's causing water pooling in your washer. This drain component channels water away from critical areas.

This clear plastic crisper drawer stores and protects fresh fruits and vegetables in the refrigerator, keeping produce organized and easy to access. It replaces a cracked, stained, or missing drawer to restore usable storage space. What it does:

• Holds and organizes fresh produce in the lower refrigerator compartment
• Helps contain moisture and prevent spills from spreading to other shelves
• Restores smooth sliding and proper alignment for easy opening and closing
• Works with the existing tracks and support brackets when undamaged

• One replacement clear plastic crisper drawer

• Remove contents and lift out the old drawer; slide the new drawer into the existing tracks until it seats
• Inspect rails and supports for damage before installing; replace supports separately if worn
• No tools typically required for drawer swap, but keep hands clear of pinch points
• Follow refrigerator owner's manual for any model-specific guidance and safety precautions

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This wiring harness connects refrigerator control components and delivers power and signals between modules so affected features work reliably. It replaces a damaged or worn harness to restore proper electrical connections. What it does

• Provides factory-style electrical connections between control boards, sensors, and powered components
• Restores lost or intermittent power and signal paths that can cause feature failures
• Prevents erratic operation caused by frayed wires, broken terminals, or corroded connectors
• Matches OEM routing and connector types to ensure correct fit and function

• Disconnect power to the appliance before beginning any repair
• Compare the new harness to the old one to ensure connector types and routing
• Route harness along original clips and secure all connectors until they click
• Avoid stretching wires; use proper tools and replace any damaged mounting clips

This wiring harness routes power and signals between the appliance control and components to restore reliable electrical connections and proper function. It replaces a damaged or broken connector assembly to help resolve control or power issues. What it does:

• Provides the factory routing and connection points between the control board and affected components
• Restores secure electrical connections when wires are frayed, burnt, or connectors are loose
• Can resolve intermittent power, non-responsive controls, or specific function failures caused by wiring faults
• Uses factory-style terminals and connectors for a direct-fit repair when installed correctly

• Disconnect power before inspecting or replacing the harness to avoid shock or damage
• Match connector shapes and pin counts; do not force connectors together
• Route and secure the harness along original clips and channels to prevent rubbing or heat exposure
• If corrosion, melting, or other damage is extensive, inspect adjoining components and boards for related damage

Flexible plastic tubing that recirculates water inside the washer drum during wash cycles. Replace if cracked, split, leaking, or showing wear.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.