Parts for Ge PFE28PYNCFS: Case Parts

Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.

Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.

Secures the water filter manifold to the cabinet, ensuring proper alignment and a leak-free seal. Replace if damaged or filter won't seat correctly.

Straight 1/4-inch coupler joins two sections of refrigerator water tubing. Replace when cracked, leaking, or missing to restore connections.

This is a mounting screw used to secure various internal or external components in the refrigerator. It is a small Phillips pan-head fastener designed for use with the specific thread and length required by the appliance. Replace this screw if the original is stripped, lost, or damaged during a repair, causing a component to be loose or improperly secured.

Secures panels, brackets, and internal components in refrigerators. Replace if screw is missing, stripped, or corroded. 1/4-20 thread, 7/8" length.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Fix loud fan noise or no ice production. This icemaker fan with thermistor circulates air and monitors temperature for proper ice cube freezing.

Interior light not working when door opens? This light switch controls refrigerator illumination. DIY-friendly install takes 30-45 minutes with video.

Replacement mounting screw for securing panels, trim, and internal brackets. Needed when original fasteners are missing, stripped, or damaged.

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

Secures water tubing to fittings in refrigerators and dishwashers. Replace if leaking, tubing slips off, or clamp is cracked. Confirm fit with model number.

Dark gray molded corner cover that restores finished appearance of refrigerator cabinet. Replaces cracked, chipped, or missing corner caps and protects edges.

Leveling leg screw assembly for bottom-mount refrigerators. Installs at the base to adjust height and stability. Replace if broken, stripped, or missing.

Right-hand hinge top pin assembly installs at the top of refrigerator doors. Replace when cracked, broken, or causing misalignment and poor door swing.

Left-side top hinge pin assembly secures refrigerator door to cabinet. Replace worn, damaged, or missing pin to restore proper alignment and door operation.

Secures the mullion or flipper door for a tight seal in your refrigerator. Replace if the door won't latch properly or the seal is compromised. Verify fit.

Case back tube for bottom-mount refrigerators. Installs behind the refrigerator case. Replace if cracked, damaged, or leaking to restore proper function.

Roller wheel for bottom-mount refrigerators. Mounts to the base to allow smooth rolling movement. Replace if cracked, broken, or causing uneven gliding.

The Front/Rear Wheel & Axle is an OEM replacement part for GE refrigerators. This set includes both the front and rear wheels, along with the axle, providing a solution for movement of your refrigerator. These wheels and axle ensure easy mobility and stability when moving or repositioning your refrigerator. The front wheels allow for convenient maneuverability, while the rear wheels provide stability and support.

A bad front/rear wheel and axle can occur due to wear and tear, damage, or component failure over time. If you notice symptoms such as difficulty in moving the refrigerator, uneven or wobbly positioning, or unusual noises when the refrigerator is being moved, it may indicate a need to replace the front/rear wheel and axle.

Symptoms of a bad front/rear wheel and axle include:

• Difficulty in moving the refrigerator
• Uneven or wobbly positioning
• Unusual noises when moving the refrigerator

Restore your refrigerator by replacing the faulty front/rear wheel and axle with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Hex washer head screw for refrigerator assembly and panel mounting. Replace if stripped, missing, or corroded to secure interior components properly.

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

Replacement center hinge for the right side of your bottom-mount refrigerator door. Restores proper door alignment and smooth operation when original is cracked or worn.

Secures and pivots the refrigerator door at the middle hinge point for proper alignment and smooth operation. Replace if bent or worn to restore even gaps and sealing. Verify fit by model number.

Covers and protects the door hinge mechanism on your refrigerator. Replace if cracked, broken, or missing to restore a finished appearance.

Interior door trim cover that restores appearance and protects insulation. Replace when cracked, broken, or missing to improve fit and finish.

The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.

Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.

Symptoms of a bad Door Light Switch include:

• Refrigerator light not turning on or off correctly
• Light flickering or remaining dim
• Light staying on even when the door is closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replace your refrigerator's fresh food LED light to restore bright interior lighting. Installs easily when your compartment light fails or dims. Verify fit.

Fixes slow water dispensing or small ice cubes in your refrigerator. The filter manifold connects your water filter to the dispenser and ice maker.

Reads RFID chip in water filters to track filter life and alert when replacement is needed. Replace if filter status light stays on after changing filter.

Fix water dispenser not working or filter not detected issues. This filter cover houses the RFID tag and secures your cartridge. Easy DIY fix.

Fixes water leaks from filter area and poor water flow. This cover assembly secures your filter cartridge properly. Straightforward DIY repair.

Fixes refrigerator door lights, dispensers, or sensors not working. This wiring harness restores power connections between the door and main cabinet.