Parts for Dacor ER36GSCHLP: Cell Assembly Parts

This service receptacle hinge is the hinge assembly used to support and secure the appliance's service receptacle/panel, restoring a stable, properly aligned access panel. It replaces a worn or damaged hinge to help the panel open and close smoothly. What it does

• Provides pivot and support for the service receptacle or service access panel
• Keeps the panel aligned and securely attached to the appliance frame
• Prevents the panel from sagging, jamming, or falling when opened
• Common symptom: loose, wobbly, or detached service panel or difficult-to-open access

• One service receptacle hinge

• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Typical install requires basic hand tools; support the panel while removing and installing the hinge
• Inspect mounting screws and nearby components for wear and replace if damaged

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

This bushing support stabilizes the dryer/tub rack assembly to reduce wear and keep the drum or rack turning smoothly. It restores proper alignment and helps stop rubbing, scraping, and unusual noises caused by worn support components. What it does:

• Centers and supports the rack/drum at the rear/front to maintain smooth rotation
• Reduces metal-on-metal contact that causes scraping, grinding, or squealing
• Helps prevent excessive wobble and uneven spinning that can lead to further damage
• Works with existing shafts, bushings, and support brackets to restore proper operation

• Disconnect power (and gas if applicable) before starting any repair
• Replacement typically requires removing the dryer cabinet or access panel; have basic hand tools ready
• Inspect mating bushings, shafts, and mounting hardware and replace any worn parts for a reliable repair

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.

The Oven Igniter is an OEM part for Samsung ranges. It is responsible for igniting the gas to create a flame that heats the oven cavity for cooking.

A bad oven igniter can be caused by wear and tear over time, electrical issues, or damage. When the igniter malfunctions, it can result in a range of problems, such as the oven not reaching the desired temperature, uneven heating, or the inability to ignite the gas.

Symptoms of a bad oven igniter include:

• Oven not reaching the desired temperature
• Uneven heating of food
• Gas smell without ignition
• Igniter glowing but no flame

Replace your faulty oven igniter with this genuine OEM part to restore your range oven. This Samsung part can also be used on Kenmore/Sears appliances.

The Stainless Steel Weather-Resistant Service Screw #8x3/8 for Gas Walk-Behind Mower is an essential component for maintaining your mower's performance. Crafted from high-quality stainless steel, this service screw is designed to withstand harsh weather conditions, ensuring long-lasting durability. The #8x3/8 size provides a secure fit, keeping your mower's parts firmly in place during operation. Using a genuine OEM part guarantees compatibility with your Samsung gas walk-behind mower, ensuring optimal performance and reliability. The weather-resistant properties help prevent rust and corrosion, extending the lifespan of your mower. Whether you're performing routine maintenance or replacing a worn-out screw, the Stainless Steel Weather-Resistant Service Screw DE81-02200A offers a dependable solution. Enhance the functionality of your gas walk-behind mower with this durable, high-performance service screw, designed to meet the highest standards of quality and functionality.

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw