Clicklink Parts

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This replacement part is a pin lynch. This is a genuine replacement part made by MTD. This part is small but important to ensure that the axle or shaft is working properly during use.A new pin lynch might be needed if the current one is missing or damaged. It is not uncommon for the pin to be stripped down over time due to normal wear and tear in the machine. Often times the pin also gets lodged into place and should be replaced if this ever occurs. Wear work gloves when completing this repair to prevent injury. The engine should be completely turned off and cooled down. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This is an extension boom and flex shaft assembly that is used in pole pruners and string trimmers. It is made to offer extra extensions so the pruner or trimmer can be used on items farther away from the user. It adds additional reach to make yard and garden tasks easier. The tube comes with an internal flexible drive shaft. It arrives to the user in a pre-assembled state and is ready to be installed. This shaft assembly can be used to replace a broken part or purchased to add reach to a pruner or trimmer that didn't come with one.This boom and flex shaft assembly requires no tools to be installed. Make sure the equipment it will be installed on is turned off, and the spark plug wire has been disconnected. Access the shaft and remove the broken boom and flex shaft assembly. The new replacement part can be installed by hand.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The extension boom and flex shaft assembly is designed to be used with string trimmers and pole pruners manufactured by MTD and Ryobi.

This replacement part is an oil tank assembly. This is a genuine replacement part made by MTD. This part is responsible for holding the oil or fuel that is needed for many types of machines that run using this type of engine. A new oil tank assembly might be needed if the current one is damaged or broken in any way. This can be due to normal wear and tear after years of use. If the tank is cracked it may be leaking oil. If this is the case it is recommended that it be replaced as soon as possible. The repair should be fairly simple and only require common household tools. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a genuine replacement chainsaw chain. Using a chain rather than a saw blade ensures that the tool lasts longer, cuts cleaner, and requires less sharpening and care than a blade would. The chain on a chainsaw can be easily taken off and replaced by this part to make the chainsaw work smoothly and efficiently. If the old chain is rusted or not cutting well, a replacement is needed for the chainsaw.To replace the chain, first, make sure that the machine is off and unplugged. Wear gloves when working, as the chain may be sharp. Bolts on the chainsaw will need to be loosened to release tension in the chain, and then the chain can be removed from the bar. The new replacement chain can then be added to the bar and screwed back in.This OEM replacement part is sourced directly from the manufacturer. It is sold individually. It is manufactured from Troy-Bilt and for use for any Troy-Bilt chainsaw.

This genuine replacement part is a MTD 8” bar for use with chainsaws.This chain bar is for use with chainsaw attachments. It is used to provide a seat for the chain. It is responsible for guiding the movement of the chain, the chainsaw's cutting element. A properly functioning chain bar is essential for the safe and reliable use of a chainsaw. The chain bar may become worn out or damaged due to extended use, and will require replacement. Wear on the guide bar is usually most severe on the underside of the bar. Remember to check the bar periodically to spot any wear or damage. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench or allen key may be needed for installation of this part. Please note: For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with Troy-Bilt and Cub Cadet chainsaws.

Trimmer head not spinning or making grinding noises? This gear box assembly transfers power from the engine to the cutting head. Moderate DIY repair.

Fix a loose or damaged split-boom connection with this drive shaft coupler. Includes knob, coupler body, and mounting screws for secure shaft attachment.

Lower housing boom for line trimmers and handheld garden equipment. Replaces cracked, broken, or damaged boom sections in the lower assembly.

Secures the lower handle clip on line trimmers and lawn equipment. Replace if broken, stripped, or missing to properly mount the handle assembly.

Cuts heavy brush and weeds on gas line trimmers. Replace if blade is cracked, broken, or not cutting properly. Attaches to gearbox. Verify fit.

This blade retainer kit is designed for use with string trimmers and edgers by many manufacturers. It comes with a metal retaining washer that is used with the blade, as well as the needed spool cutting heads. This kit also includes the nut needed to fasten the blade to the gearcase. It is used to install a blade onto the trimmer while adding stabilization through the nut. The parts in the blade retainer kit can become worn out during use and may need to be replaced.When the blade needs to be replaced or a part of the blade retainer kit is broken, removing the parts is required. Moving the blade involves turning the retaining bolt while the equipment is on a level surface. Next, undo the bolt holding the blade so it can be removed. The blade can be replaced at this time, as well as the parts from this blade retainer kit.This blade retainer kit is made for edgers and string trimmers manufactured by Yard-Man, Craftsman, Bolens, Ryobi, MTD, Troy-Bilt, and Yard Machines. It is a single retainer kit that comes as a genuine OEM replacement part sourced directly from the manufacturer.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

Replacement bolt for line trimmers and snow throwers. Secures internal components and housing. Order when original is stripped, missing, or damaged.

This replacement part is a concentrator nzle and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Concentrator nzles are an important part of many machines and are responsible for directing the airflow that is coming out. This particular nzle is typically found in leaf blowers and helps the user gain a more accurate position when trying to clear leaves and other debris. A new concentrator nzle might be needed if the current one is damaged or missing. If the current one is missing the user might have trouble clearing debris as the airflow might not be as concentrated to one area. This replacement or repair should be fairly simple and should not require any major tools. Most nzles are able to slide off and clip on. This nzle is a genuine OEM replacement part. This part is sourced directly from the manufacturer to ensure a proper fit and is sold individually.

Fix a trimmer that won't spin or cuts poorly with this lower flexible drive shaft assembly. Connects the motor to the cutting head for proper operation.