Clicklink Parts

This oil line is a genuine MTD part, sold individually. This oil line can be used as a replacement part in a pole saw. The purpose of the oil line in a pole saw is to provide a safe and guided passageway through which oil can channel into the appliance when the appliance is low on oil and requires additional fuel in order to continue its standard use.The oil line in a pole saw might be damaged at any point within its typical lifespan. If this damage occurs to the extent that the oil line is compromised and oil cannot be safely passed into the oil tank in order for the appliance to consume the oil at regular intervals, the oil line might have to be completely removed and replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil line is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Cub Cadet.

Upper boom assembly for gas line trimmers. Connects the engine housing to the lower shaft. Replace if cracked, bent, or damaged from impact or wear.

Fix a loose or wobbly trimmer head with this locking lever pin. Secures the head assembly and prevents vibration during operation. Simple repair.

This blade guard is a genuine MTD part, sold individually. This blade guard can be used as a replacement part for a string trimmer. This blade guard protects the blades of the string trimmer so that they are not damaged upon impact with the surface on which the string trimmer is being operated.The blade guard might have to be replaced at some point within the standard lifespan of the appliance in the event that the component suffers damage. This could occur if the blade guard is chipped, torn, punctured, or sufficiently eroded to the point that the blades are directly exposed to potential impact with hard surfaces. The blade guard needs to be removed and replaced with this genuine OEM replacement part if the blades are exposed or are at risk of exposure over general long-term usage.This is an OEM part sourced directly from the manufacturer. It is sold individually. This blade guard is compatible with the following brands: MTD, Craftsman, and Cub Cadet.

Bracket guard for line trimmers. Mounts to the trimmer head assembly to secure protective guard components. Replace if cracked, broken, or missing.

Secures components on gas line trimmers and handheld products. Replace this screw if damaged, stripped, missing, or no longer holding parts firmly in place.

Fastening screw for lawn mowers, snow throwers, and trimmers. Secures components together. Replace if stripped, corroded, or missing during repairs.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This is an extension boom and flex shaft assembly that is used in pole pruners and string trimmers. It is made to offer extra extensions so the pruner or trimmer can be used on items farther away from the user. It adds additional reach to make yard and garden tasks easier. The tube comes with an internal flexible drive shaft. It arrives to the user in a pre-assembled state and is ready to be installed. This shaft assembly can be used to replace a broken part or purchased to add reach to a pruner or trimmer that didn't come with one.This boom and flex shaft assembly requires no tools to be installed. Make sure the equipment it will be installed on is turned off, and the spark plug wire has been disconnected. Access the shaft and remove the broken boom and flex shaft assembly. The new replacement part can be installed by hand.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The extension boom and flex shaft assembly is designed to be used with string trimmers and pole pruners manufactured by MTD and Ryobi.

This replacement part is an oil tank assembly. This is a genuine replacement part made by MTD. This part is responsible for holding the oil or fuel that is needed for many types of machines that run using this type of engine. A new oil tank assembly might be needed if the current one is damaged or broken in any way. This can be due to normal wear and tear after years of use. If the tank is cracked it may be leaking oil. If this is the case it is recommended that it be replaced as soon as possible. The repair should be fairly simple and only require common household tools. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

Trimmer head not spinning or making grinding noises? This gear box assembly transfers power from the engine to the cutting head. Moderate DIY repair.

Lower housing boom for line trimmers and handheld garden equipment. Replaces cracked, broken, or damaged boom sections in the lower assembly.

This replacement part is a concentrator nzle and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Concentrator nzles are an important part of many machines and are responsible for directing the airflow that is coming out. This particular nzle is typically found in leaf blowers and helps the user gain a more accurate position when trying to clear leaves and other debris. A new concentrator nzle might be needed if the current one is damaged or missing. If the current one is missing the user might have trouble clearing debris as the airflow might not be as concentrated to one area. This replacement or repair should be fairly simple and should not require any major tools. Most nzles are able to slide off and clip on. This nzle is a genuine OEM replacement part. This part is sourced directly from the manufacturer to ensure a proper fit and is sold individually.

Rotating trimmer head for gas line trimmers and weed wackers. Replace when cracked, worn, or no longer spinning properly during operation.

This part is a replacement blade driver. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken blade driver in line trimmers.Blade drivers help to ensure the line trimmer blade rotates on the gearbox shaft and so is an essential component and should be replaced if faulty. This part may become corroded, worn, jammed, or otherwise damaged over time, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular blade driver, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This blade driver can be used with a variety of line trimmer models manufactured by Craftsman, MTD, Troy-Bilt, and other brands.