Columbia Gasket & Seal

This is a cylinder head gasket that is an OEM replacement part sourced directly from the manufacturer for use on lawn mowers and other small engines in outdoor lawn and garden equipment. The head gasket is the engine block that separates the cylinder head from the engine block. This gasket is used to prevent oil from mixing with coolant. The cylinder gasket seal also seals the internal combustion process, putting it under the pressure it needs to operate. If the gasket is worn or cracked and the pressure is not right, the engine will not operate correctly, and there will be a loss of power. Oil leaks are another way to tell that the cylinder head gasket is bad and needs to be replaced. Before deciding if the cylinder head gasket is the problem, a compression test should be run using a compression gauge. After pulling the starter cord, the internal pressure should read 60 psi. If the reading is less than this, the cylinder head has lost compression, and the gasket should be removed and replaced. This cylinder head gasket is sold individually. This gasket is designed for use on lawn mowers and small engines manufactured by MTD, Yard Machines, Troy-Bilt, Yard-Man, Cub Cadet, and Husky.

The carburetor gasket is installed between the engine and the carburetor body, providing an airtight seal so that all fuel and air going into and out of the carburetor are delivered at optimal pressure for peak engine performance. This gasket can wear down over time and create leaks in the seal, which allows air to escape and can affect the operation of the engine. In the event that the engine won’t stay engaged or isn’t running properly, there may be a problem with the gasket seal. Be sure to let the engine cool completely before working on this part. Drain the gas tank and work in a well-ventilated area. This genuine OEM carburetor gasket replacement will offer an exact fit for compatible lawn and garden equipment engines, including those from MTD, Craftsman, Troy-Bilt, Yard-Man, Husky, and Cub Cadet. This gasket is sold individually as a single part.

This is a replacement fuel bowl gasket that is specifically made for select models of snowblowers. The fuel bowl gasket is used to create a seal in the fuel bowl, allowing the carburetor to maintain appropriate pressure and deliver the fuel properly throughout the engine. Over time, gaskets like this one will become compressed and deteriorated, creating a leak in their seal. This can lead to fuel or air leakage, poor engine performance, and more serious damage if left unrepaired. Replacing gaskets is typically considered routine maintenance, and it is essential to replace them as quickly as possible. This genuine fuel bowl gasket is manufactured to OEM specifications by MTD and designed for use in select machines from MTD, as well as those from Cub Cadet, HUSKEE, Lawn Chief, RYOBI, Troy-Bilt, Craftsman, Remington, Yard Machines, Yard Man, and Bolens. There are hundreds of machines that can use this fuel bowl gasket. It is made of durable rubber material and sold as a single unit. Always be sure to inspect gaskets when performing other maintenance and repairs and use the correct tools for gasket replacement to prevent damage during installation.

This is a gasket kit that contains a variety of parts utilized in many kinds of lawn and garden equipment. Each of the parts in the kit is created to seal two surfaces inside the equipment. The components in the kit include a carburetor insulator plate, a carburetor gasket, a carburetor insulator gasket, two carburetor gasket plates, an exhaust pipe gasket, a valve cover gasket, and an oil drain plug washer. If a lawn and garden tool is leaking fuel, air, or oil, these parts can be used to replace the faulty component.A socket wrench or small monkey wrench and a screwdriver will be needed to replace any parts included with the gasket kit. Make sure the lawn equipment is on a flat surface and the spark plug wire has been disconnected. Disassemble any needed components to reach the gasket or other part that needs to be replaced. Put in the new component and reassemble before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit. The external gasket kit is designed to be used with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This part is a replacement oil seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, worn, or defective oil seal in outdoor power equipment. The oil seal helps to prevent oil from leaking from the engine sump. If the user notices an oil leak, this seal may need to be replaced. When working on or near an engine, it is important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this oil seal, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this oil seal is suitable for use on several different models of outdoor power equipment manufactured by MTD, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This carburetor gasket is located between the insulator and the carburetor, creating a strong seal between the two to allow for optimal compression and engine performance. Over time and due to constant heat exposure, gaskets can degrade or become damaged. This can result in leaks in the system, which will impact performance and could cause the engine to fail completely if not properly addressed. If the carburetor gasket becomes faulty in any capacity, it needs to be replaced as soon as possible. This genuine OEM gasket replacement is manufactured to exact standards and is compatible with several models of snowblower engines from Troy-Bilt, MTD, Yard Man, Yard Machines, Cub Cadet, and Husky. This gasket is made of durable material, but gaskets could be more prone to damage or breakage during other repairs, so always use caution when working with this part. Allow the engine to cool completely and wear gloves when performing any engine repairs for hand protection.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement intake valve seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or worn intake valve seal in outdoor power equipment.The intake valve seal prevents leaks and seals the intake valve, which can be found inside the engine housing. Valve seals should be checked regularly and replaced if worn, brittle, broken, or ineffective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular intake valve seal, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This intake valve seal can be used with a variety of outdoor power equipment models manufactured by MTD, Craftsman, and other brands.

This replacement part is an intake valve seal. It is a genuine replacement part made by MTD. This intake valve seal is able to close the valve in the machine or appliance so that air of fuel cannot escape during use. This part is essential to the overall operation of the machine. A new intake valve seal might be needed if the current one is allowing for air or fuel to escape during use. This can cause additional problems within the machine in general. Be sure the engine is completely powered off and cooled down before attempting to replace this part. Reference the appropriate user manual for more information. This is a genuine OEM replacement part. This intake valve seal is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This replacement part is an oil seal. This part is small but important in various types of machines that rely on oil to run. The oil seal is found near the fuel tank and ensures that there are no leaks. If the machine is leaking oil, it can be due to a damaged oil seal. Seals like this one can wear out over time or be knocked out of place by impact.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

Cylinder head gaskets provide a seal between the engine block and the head that caps the cylinders. They ensure that the cylinders, oil, and cooling channels are isolated from one another and contain the pressure in the engine. If there is a problem with a gasket, it could result in overheating, white smoke from the exhaust, and leaks.The cylinder head gasket undergoes a lot of stress when the engine is running. Over time, the gasket can start to wear down, crack, and break. Owners will want to replace the gasket to ensure the machine is running properly and efficiently. Replacing the cylinder head gasket can be a large job even when working on a small engine.This cylinder head gasket is used in engines from a range of manufacturers including MTD, Craftsman, Columbia, Yard Machines, Cub Cadet, and Troy-Bilt. The gaskets are OEM parts sourced from the manufacturer. Each of the gaskets is sold individually.