Columbia Snow Removal Equipment Parts

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

A gas powered engine often requires priming before it can run, which means injecting some of the fuel into the engine's carburetor. Here, a careful balance of air and gas will receive a spark that causes combustion. The most common way to prime an engine is to use a primer assembly that is activated by a bulb that is pressed to create suction and draw fuel into a reservoir or carburetor. This replacement fuel bulb is for snowblowers that rely on gas powered engines to run. The fuel bulb is very flexible and made to endure seasonal conditions. It works with Craftsman, Yard Machines, MTD, Troy Bilt, and Bolens snowblowers. This is an OEM replacement part that fits into the cover assembly and which requires only a wrench to replace and install. It is sold individually, and other components of the priming assembly may be needed.

The fuel line is used to carry fuel through the machine, and it must be in good condition. As fuel line parts age, they are prone to damage. In some cases, they might crack, which could result in a fuel leak. Other times, the ends of the tube might not fit properly, even when they are clamped down. Eventually, the fuel line will need to be replaced. This is a relatively simple job, which will require only a pair of pliers to complete. This replacement fuel line kit is sold individually. This OEM kit will include the rubber tube as well as two metal clamps for attaching the line to the machine. The fuel line may be used with snowblowers, lawnmowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines, It will work with machines from many different brands, including MTD, Yard Machines, Troy-Bilt, Yard-Man, Bolens, Cub Cadet, and Husky.

This is a genuine OEM right-hand auger sourced directly from the manufacturer. It is designed for use on snowblowers and snow throwers. The augers on a snowblower are rotating blades responsible for accumulating snow and pushing it through the auger housing and into the chute to be dispersed. Over time and with repeated use, the auger may stop working correctly. If snow isn't coming out of the chute when used, the auger may be damaged and will not push the snow; when this happens, the auger should be replaced. The auger may be damaged due to hitting rocks and other debris while removing snow. Augers should be inspected regularly to check for broken or bent parts. A screwdriver and socket set is needed to remove and replace the auger. Snowblowers and snow throwers have a right, left, and sometimes middle auger. All augers should be inspected and replaced as needed. Wear gloves when changing the auger and make sure the machine has cooled down if recently used. This right-hand auger is made of metal with serrated edges; it is sold as an individual unit. This right-hand auger is compatible with snow blowers and snow throwers manufactured by Craftsman, Troy-Bilt, MTD, Yard Machines, Yard-Man, Cub Cadet, and Husky.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

Snowblowers require a chute adapter that directs the snow pulled into the machine up, out, and away. The chute adapter is adjustable and moves vertically to determine the height of the snow being expelled from the device. It attaches the auger housing to the lower chute. There may be issues that arise with the chute adapter with regular use or damage from ice. When snow is no longer coming out from the chute adapter, it could be clogged, or the adapted may require replacement. A damaged chute adapter will lower the snow thrower's effectiveness and increase the time and energy demanded for clearing snow.The chute adapter is easily installed with hardware not included with this piece. Existing nuts and bolts may be reused to attach this replacement chute. A socket set and wrench set are required for assembly. Wear gloves for safety when replacing the adapter.This OEM authentic replacement part is a chute adapter compatible with several different types of snow blowers. It can be installed on brands including MTD, Yard Machines, Yard-Man, Troy-Bilt, Cub Cadet, and Husky. The chute is made from rugged black plastic. It is sold individually and includes the chute only.

This trigger is a genuine MTD part that can be used as a replacement part for a snowblower operated by power steering. The trigger is located under the handlebars of a snowblower and functions as a crucial feature of the appliance's power steering capabilities. The trigger is connected to the tires through a network of cables through the engine, allowing effortless turning capabilities, even on tough, sharp turns. A trigger might have to be replaced if its material shows signs of deterioration, including bending, cracking, tearing, or melting. This deterioration can be attributed to general overuse or long-term exposure. If a trigger is subject to any of this kind of damage, it is best to replace it before using the snowblower, as the malfunctioning trigger might affect the power steering capabilities of the snowblower, creating an unsafe work environment and the possibility of permanent or unnecessarily extensive damage. Always wear gloves when handling, repairing, and operating outdoor equipment. This trigger is compatible with the brands MTD, Troy-Bilt, Yard Machines, and Cub Cadet.

This is a replacement snowblower chute. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged, detached, or worn chute on various snowblower models. The snowblower chute expels snow from the equipment in order to clear the desired area. A damaged chute can prevent proper expulsion of snow. The chute is subject to significant wear and tear and may require replacement to ensure the snowblower can work properly. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this snowblower chute, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this chute is suitable for use on several different models of snowblowers manufactured by Craftsman, Yard Machines, MTD, and Troy-Bilt. This is a genuine part made of high-quality, durable plastic and is sold individually.

Note: This is a quantity of 1 shear pin only. For kit of 4 shear pins with retainers, order OEM-738-04155