Parts for Bosch B20CS80SNS/01: Compressor / Condenser Parts

This Bosch filter has an activated carbon media that is designed to reduce chlorine taste and odor, sediment, lead, mercury, and other impurities from your drinking water. Used on many Bosch refrigerators including the Evolution 500 Series model B20CS50SN, Evolution 800 Series model B20CS80SN, and the EVOLFLTR10 filtration system. For best performance, filter should be changed every 6 months or 400 gallons. Pressure range: 25-125 psi. Temperature range: 33-100 F. Flow Rate: 0.5 gallons per minute.

This holder is a small mounting bracket that secures and aligns a removable appliance component, restoring proper fit and preventing movement. It's a direct-fit replacement designed to return the original attachment and support. What it does:

• Secures a removable component or assembly in place to prevent shifting or rattling
• Restores correct alignment so parts seat and function as intended
• Stops common symptoms like loose parts, noise from vibration, or panels that won't stay seated
• Replaces broken, cracked, or worn mounting points that can allow excess movement

• One holder/mounting bracket

• Disconnect power and/or unplug the appliance before starting any repair
• Basic hand tools may be required; follow the appliance service manual for access
• Inspect surrounding clips and fasteners and replace if damaged to ensure a secure fit

This replacement screw is a direct-fit fastener used to secure panels and small components. It restores proper attachment and helps eliminate loose or rattling parts for a secure appliance fit. What it does

• Secures panels, brackets, and trim to restore proper alignment and prevent movement
• Helps stop rattling, vibration noise, and parts that shift or come loose
• Matches OEM thread and length for reliable fit when it's the correct screw for the repair
• Used where original mounting hardware is missing, stripped, or damaged

• One replacement screw

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid thread damage or cracked panels
• This screw matches the original part by comparing size, thread, and head style before installation

This holder is a small mounting bracket that secures and aligns a removable appliance component, restoring proper fit and preventing movement. It's a direct-fit replacement designed to return the original attachment and support. What it does:

• Secures a removable component or assembly in place to prevent shifting or rattling
• Restores correct alignment so parts seat and function as intended
• Stops common symptoms like loose parts, noise from vibration, or panels that won't stay seated
• Replaces broken, cracked, or worn mounting points that can allow excess movement

• One holder/mounting bracket

• Disconnect power and/or unplug the appliance before starting any repair
• Basic hand tools may be required; follow the appliance service manual for access
• Inspect surrounding clips and fasteners and replace if damaged to ensure a secure fit

This holder is a small mounting bracket that secures and aligns a removable appliance component, restoring proper fit and preventing movement. It's a direct-fit replacement designed to return the original attachment and support. What it does:

• Secures a removable component or assembly in place to prevent shifting or rattling
• Restores correct alignment so parts seat and function as intended
• Stops common symptoms like loose parts, noise from vibration, or panels that won't stay seated
• Replaces broken, cracked, or worn mounting points that can allow excess movement

• One holder/mounting bracket

• Disconnect power and/or unplug the appliance before starting any repair
• Basic hand tools may be required; follow the appliance service manual for access
• Inspect surrounding clips and fasteners and replace if damaged to ensure a secure fit

This Bosch filter has an activated carbon media that is designed to reduce chlorine taste and odor, sediment, lead, mercury, and other impurities from your drinking water. Used on many Bosch refrigerators including the Evolution 500 Series model B20CS50SN, Evolution 800 Series model B20CS80SN, and the EVOLFLTR10 filtration system. For best performance, filter should be changed every 6 months or 400 gallons. Pressure range: 25-125 psi. Temperature range: 33-100 F. Flow Rate: 0.5 gallons per minute.

This replacement tray provides a durable receptacle that catches drips and holds small items in the appliance, restoring clean operation and preventing leaks or spills from reaching internal components. Easy to install and remove for cleaning. What it does

• Collects drips, crumbs, or small spills to protect the appliance interior
• Helps keep components dry and reduces risk of water-related damage
• Restores the original fit and function when a tray is cracked, warped, or missing
• Makes routine cleaning faster by providing a removable surface

• One replacement tray

• Disconnect power and water to the appliance before servicing
• Remove surrounding panels or racks as needed to access the tray; handle gently to avoid breakage
• Inspect mounting slots or tabs and align tray before seating fully into place
• Clean the tray with mild soap and water; avoid abrasive cleaners or high-heat drying

This fixture is a replacement component designed to restore proper fit and support where the original mounting or housing has worn or broken. It helps maintain secure alignment of adjacent parts for reliable appliance operation. What it does:

• Provides the structural support needed for the attached assembly or trim
• Replaces a cracked, broken, or missing fixture that causes misalignment or rattling
• Helps stop loose parts from shifting during operation and reduces unusual noises
• Restores correct fit to prevent leaks or poor sealing when applicable

• High-level replacement only; ensure appliance is unplugged or power is off before starting
• Use correct fasteners and avoid overtightening to prevent cracking
• Inspect surrounding parts and seals for damage while replacing this fixture

This replacement screw secures panels and components on compatible appliances, restoring proper fit and stopping rattles or loose parts. Use it when a factory screw is missing, stripped, or damaged to return assemblies to stable condition. What it does:

• Fastens panels, trim, brackets, or assemblies to restore secure mounting.
• Helps eliminate rattling, vibration noise, or loose-fitting parts.
• Replaces stripped, corroded, or missing fasteners that prevent proper component alignment.
• Works as the original-style screw specified by the manufacturer for the listed application.

• Disconnect power to the appliance before starting any repair.
• Use the correct screwdriver or bit to avoid stripping the screw head.
• Tighten until snug; avoid over-torquing which can damage threads or parts.
• Keep removed hardware and new screw in a safe place during reassembly.

This replacement oven interior lamp restores interior lighting so you can check food without opening the door. Fits compatible Bosch ovens that use a dedicated interior oven lamp. What it does

• Replaces a burned-out or dim oven light so you can see inside while cooking.
• Helps diagnose whether the issue is the bulb (vs. wiring or switch) when the interior light fails.
• Provides bright, focused illumination for monitoring baking and roasting.

• Disconnect power to the oven (unplug or shut off circuit) and allow the oven to fully cool before replacing the lamp.
• Remove the protective cover per your oven's service instructions; handle the bulb with a cloth or gloves to avoid oils on the glass.
• Verify the bulb seats securely and replace the protective cover before restoring power.

This replacement front console trim restores the appliance's exterior control area for a clean, finished appearance and proper button/knob alignment. Use it to replace scratched, cracked, or warped front trim. What it does

• Replaces the damaged or worn front console trim so controls and display sit correctly
• Helps prevent dirt and moisture from entering the control area
• Restores cosmetic appearance for a like-new finish
• Useful when the original panel is cracked, warped, or missing mounting points

• One replacement front console panel

• High-level swap: remove power and follow OEM disassembly steps for the console before replacing the panel
• Keep small fasteners and clips organized; some models require removing control knobs or the control module
• Avoid using excessive force on plastic tabs; align mounting points before securing

This frame is the structural support piece that secures and aligns the appliance's front assembly, helping keep panels and the door in correct position for proper operation and appearance. It restores stability and fit. What it does:

• Provides mounting and alignment for the front/door assembly to prevent gaps and misalignment
• Keeps panels and trim secured to reduce vibration and rattling during operation
• Helps maintain a proper seal and appearance by holding edges flush
• Can address symptoms such as a loose or wobbly door, visible gaps, or rattling/front movement

• Disconnect power and water before beginning any work
• Remove surrounding trim or panels as needed; keep track of fasteners
• Handle finished surfaces carefully to avoid scratches; use appropriate tools

This door seal is the refrigerator door gasket that helps maintain a tight seal to keep cold air in and reduce energy loss. It restores proper door sealing to help the appliance maintain temperature and run efficiently. What it does:

• Forms an airtight barrier between the door and cabinet to prevent warm air infiltration
• Helps maintain consistent interior temperatures for food preservation
• Reduces frosting and run-time caused by a failing or torn seal
• Fits where the original door gasket is worn, torn, or misshapen

• One door seal/gasket

• Installation recommended; gasket may require adhesive or screw/retainer strip depending on model
• Inspect mounting channel and clean surfaces before installing to ensure a proper seal
• Replace when gasket is cracked, stretched, or no longer seals; avoid forcing the seal into place
• Disconnect power to the appliance and follow manufacturer safety guidance before servicing

This genuine mounting holder secures internal components in place so parts stay aligned and operate quietly. It restores proper support for assemblies that have become loose or shifted over time. What it does:

• Provides a firm mounting point to hold internal assemblies in position
• Prevents rattling, misalignment, or binding caused by a loose bracket
• Helps maintain normal operation by keeping parts properly supported
• Commonly replaced when clips or supports are cracked, broken, or missing

• Inspect surrounding clips and fasteners; replace any that are damaged
• Disconnect power before servicing to avoid shock or injury
• Basic hand tools are typically required;

The Tray is an OEM part for Bosch refrigerators. It provides an additional storage shelf inside the fridge to conveniently organize smaller items.

Causes of a bad tray can include general wear and stress over repeated use. Organizing heavy items like gallons of milk or juice may have led to microfractures developing over time.

Symptoms of a bad refrigerator tray include:

• Cracks or breaks in the plastic that compromise its structural integrity
• Difficulty fitting properly on shelves or sliding smoothly
• Inability to adequately hold items like condiments, eggs or other lightweight foods

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Door Tray is an OEM part for Bosch refrigerators. This door tray fits onto the inside of the refrigerator door, providing convenient storage space for items such as condiments, beverages, and smaller food items. 

Causes of a bad door tray can include cracks or breakage due to frequent use, overloading with heavy items, or exposure to temperature fluctuations.  

Symptoms of a bad refrigerator door tray include:

• Cracks or breaks in the tray material
• The tray not fitting securely on the door
• Difficulty in holding items steadily
• The tray falling off or becoming loose when the door is opened or closed

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This fixture is a replacement component designed to restore proper fit and support where the original mounting or housing has worn or broken. It helps maintain secure alignment of adjacent parts for reliable appliance operation. What it does:

• Provides the structural support needed for the attached assembly or trim
• Replaces a cracked, broken, or missing fixture that causes misalignment or rattling
• Helps stop loose parts from shifting during operation and reduces unusual noises
• Restores correct fit to prevent leaks or poor sealing when applicable

• High-level replacement only; ensure appliance is unplugged or power is off before starting
• Use correct fasteners and avoid overtightening to prevent cracking
• Inspect surrounding parts and seals for damage while replacing this fixture

This replacement screw secures panels and components on compatible appliances, restoring proper fit and stopping rattles or loose parts. Use it when a factory screw is missing, stripped, or damaged to return assemblies to stable condition. What it does:

• Fastens panels, trim, brackets, or assemblies to restore secure mounting.
• Helps eliminate rattling, vibration noise, or loose-fitting parts.
• Replaces stripped, corroded, or missing fasteners that prevent proper component alignment.
• Works as the original-style screw specified by the manufacturer for the listed application.

• Disconnect power to the appliance before starting any repair.
• Use the correct screwdriver or bit to avoid stripping the screw head.
• Tighten until snug; avoid over-torquing which can damage threads or parts.
• Keep removed hardware and new screw in a safe place during reassembly.

This genuine mounting holder secures internal components in place so parts stay aligned and operate quietly. It restores proper support for assemblies that have become loose or shifted over time. What it does:

• Provides a firm mounting point to hold internal assemblies in position
• Prevents rattling, misalignment, or binding caused by a loose bracket
• Helps maintain normal operation by keeping parts properly supported
• Commonly replaced when clips or supports are cracked, broken, or missing

• Inspect surrounding clips and fasteners; replace any that are damaged
• Disconnect power before servicing to avoid shock or injury
• Basic hand tools are typically required;

This defrost heater melts frost and ice from the evaporator coil so your refrigerator or freezer can maintain proper airflow and temperature. Replaces a failed heater to restore normal automatic defrost cycles. What it does:

• Heats the evaporator coil during defrost cycles to remove frost and ice buildup
• Helps restore proper airflow and consistent cooling in the fresh food or freezer compartment
• Common symptom: visible frost or thick ice on the evaporator or inside the freezer
• Common symptom: intermittent cooling, long run times, or noisy defrost cycles

• One defrost heater

• Disconnect power before servicing to avoid shock or injury
• Heater is mounted near or on the evaporator; access usually requires removing interior panels and the evaporator cover
• Inspect defrost thermostat and control board when replacing the heater; replace only confirmed failed components
• Handle the heater element carefully to avoid bending or damaging the coil; secure routing of wiring and clips during reassembly

This temperature sensor monitors appliance temperature and sends temperature readings to the control board so the appliance can regulate heating and cycles. It's a direct-fit replacement designed to restore correct temperature feedback. What it does:

• Measures water/air temperature and converts it to a signal for the control board
• Helps the appliance maintain proper cycle temperatures and timing
• Can resolve temperature-related errors, incorrect water temperature, or failed cycle heating
• Works with the appliance's existing wiring harness and control system

• One temperature sensor

• Disconnect power to the appliance before starting any repair
• Handle the sensor and connector carefully to avoid damage to the probe or wiring
• Reinstall in the same orientation and secure all connectors for accurate readings

This holder is a replacement mounting bracket that secures internal components in compatible Bosch appliances, restoring proper alignment and support for related parts. It helps reduce vibration and keeps assemblies positioned for reliable operation. What it does:

• Provides a firm mounting point to hold wiring, sensors, or small assemblies in place
• Prevents component movement that can cause noise, misalignment, or intermittent connections
• Restores correct spacing to enable consistent operation of adjacent parts
• Fits into the appliance's existing bracket locations for a direct replacement

• One holder mounting bracket

• Recommend power off and appliance unplugged before installing
• Access may require removing a panel or trim; keep fasteners organized
• Install in the original orientation and secure with the same hardware where applicable

This replacement holder is the OEM-style mounting clip that secures internal dishwasher components so they stay in place for reliable operation. Restores proper component alignment and prevents rattling or parts coming loose. What it does:

• Secures and supports the specified internal component to the appliance chassis
• Keeps parts aligned to prevent rubbing, vibration noise, or intermittent operation
• Helps maintain the correct position of adjacent parts for smooth cycle performance
• Replaces damaged, cracked, or missing clips that allow components to shift

• Basic hand tools usually required; disconnect power and water before beginning repairs
• Inspect surrounding mounts and clips; replace any additional damaged hardware for best results
• Reuseable screws or fasteners—reuse original fasteners unless replacements are specified

This damper assembly controls oven vent airflow so the oven reaches and holds the correct temperature and venting. Replaces a worn or stuck vent flap to restore normal oven cycling and heat distribution. What it does:

• Opens and closes the oven vent to regulate airflow during bake, broil, and self-clean cycles
• Helps the oven maintain temperature by allowing excess heat to escape when needed
• Commonly linked to symptoms like uneven baking, persistent high internal temperature, or a stuck vent that won't open
• Functions as a direct replacement part when the existing vent flap or actuator is damaged or fails

• Disconnect power to the appliance before attempting service
• Access may require removing the oven rear panel or control housing; follow the OEM service manual
• Handle the damper gently to avoid bending the flap or damaging the actuator linkage

Replacement fan motor that circulates air to help maintain proper operating temperature and protect components from overheating. Restores airflow to stop noisy operation, vibration, or a fan that won't run. What it does:

• Drives the appliance cooling/evaporator/condenser fan to move air across coils and components.
• Restores proper airflow to improve cooling performance and reduce overheating risk.
• Stops common symptoms like loud humming/grinding, excessive vibration, or a fan that does not spin.
• Helps prevent related issues caused by stalled or weak fans.

• Disconnect power to the appliance before beginning any repair.
• Handle the fan blade and motor shaft carefully to avoid damage; use basic hand tools.

This replacement screw is a direct-fit fastener used to secure panels and small components. It restores proper attachment and helps eliminate loose or rattling parts for a secure appliance fit. What it does

• Secures panels, brackets, and trim to restore proper alignment and prevent movement
• Helps stop rattling, vibration noise, and parts that shift or come loose
• Matches OEM thread and length for reliable fit when it's the correct screw for the repair
• Used where original mounting hardware is missing, stripped, or damaged

• One replacement screw

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid thread damage or cracked panels
• This screw matches the original part by comparing size, thread, and head style before installation

This fixture is a small mounting clip used to secure internal components in place, restoring proper alignment and reducing noise from loose parts. It's a simple replacement that helps maintain appliance stability and fit. What it does:

• Secures panels, hoses, or internal assemblies to prevent movement and rattling
• Restores correct alignment for attached components
• Helps reduce vibration noise caused by loose fittings
• Works as the original-style mounting clip used in the appliance's assembly

• One fixture/mounting clip

• Disconnect power (and water if applicable) before beginning any repair
• Handle small parts carefully and keep track of fasteners
• Use basic hand tools as needed; avoid forcing parts into place

The Icemaker is an OEM part for Bosch refrigerators. It is responsible for automatically producing batches of ice using only water and energy from the refrigerator. The icemaker's advanced mechanisms utilize a precision thermoelectric design to efficiently freeze water into uniform cube-shaped ice pieces.

Causes of a bad icemaker can include mineral buildup or clogging in the water lines, defects in the freezing components, or damage to the ejection mechanism that dispenses ice.

Symptoms of an inefficient icemaker include:

• Slow or inconsistent ice production 
• Ice cubes sticking together or fused in odd shapes
• Water leaking or spraying from inside the icemaker area
• The icemaker not ejecting cubes properly or at all

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Icemaker is an OEM part for Bosch refrigerators. It is responsible for automatically producing batches of ice using only water and energy from the refrigerator. The icemaker's advanced mechanisms utilize a precision thermoelectric design to efficiently freeze water into uniform cube-shaped ice pieces.

Causes of a bad icemaker can include mineral buildup or clogging in the water lines, defects in the freezing components, or damage to the ejection mechanism that dispenses ice.

Symptoms of an inefficient icemaker include:

• Slow or inconsistent ice production 
• Ice cubes sticking together or fused in odd shapes
• Water leaking or spraying from inside the icemaker area
• The icemaker not ejecting cubes properly or at all

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This cover is an OEM replacement access panel that protects internal components and helps keep moisture and debris out of the appliance. It restores a secure, finished appearance and maintains proper component protection. What it does

• Shields electrical and mechanical components from dust, debris, and accidental contact
• Helps prevent moisture intrusion that can cause corrosion or shorting
• Restores a snug fit and proper airflow paths where applicable
• Replaces damaged, cracked, or missing panels that leave internals exposed

• One replacement cover

• Verify power to the appliance is disconnected before starting any repair
• Installation generally requires basic hand tools; handle edges carefully to avoid cuts
• Follow OEM instructions for correct placement and fastener torque
• If fasteners or brackets are missing or damaged, replace them with OEM parts for secure installation

The Glass Plate is an OEM component specifically designed for Bosch refrigerators featuring adjustable shelves on extended rail systems. Constructed of tempered glass with a textured non-slip surface, it provides a sturdy organizing platform for fruits and vegetables.  

Causes of a cracked or damaged glass plate commonly relate to accidental impacts during unloading or cleaning. Prolonged door storage compressing edges necessitates replacement.

Symptoms of a bad glass plate involve:

• Snapped or disconnected glass from shelf brackets
• Chipped edges posing sharp hazards  
• Dislodged non-slip coating compromising holdings

Causes of a bad glass plate can include impacts shifting tempered pieces and altering shelf stability. Compromised friction coatings require replating to securely position produce.

This OEM Bosch part is also compatible with some Gaggenau, Thermador, and Dacor refrigerator models featuring adjustable glass shelves. Replace for dependable storage and presentation of perishable items.
 

This frozen food container is a replacement freezer drawer bin that holds and organizes frozen items so you can make full use of your freezer storage. Durable molded plastic keeps contents contained and visible. What it does

• Serves as the lower freezer storage drawer to hold frozen food safely.
• Restores proper storage fit when the original bin is cracked, warped, or missing.
• Helps prevent items from falling into lower compartments and improves organization.
• Compatible with standard freezer drawer slides and supports normal loading.

• Simple slide-in installation; align bin with drawer tracks and seat fully.
• No special tools usually required; handle gently to avoid cracking.
• Inspect rails and stops for damage before installing replacement.
• Disconnect power and remove food from the drawer area for safe access.

The Drawer Slide Rail is an OEM component specifically designed for select Bosch refrigerator-freezer combinations. Housing the freezer drawer, its extruded aluminum rails ensure a smooth roll-out. Weighed durability supports maximum ice storage.  

Symptoms of faulty freezer drawer rails involve squeaking or binding preventing easy access. Overloading causes deformation requiring timely replacement.

Causes of bad freezer drawer rails commonly include typical wear-reducing friction-fit. Exposure to spills hastens inner-track rust-out necessitating change.

Causes of a bad freezer drawer rail involve:

• Cracks occurring from excess weight imposition   
• Separated joining clips compromising alignment
• Worn steel bearings inhibiting silky movement

Note: Left side

This OEM Bosch part is also compatible with some Thermador, Gaggenau, and Dacor refrigerator-freezer models. Replace to retain convenient access through a dependable motion for many seasons of use.

The Rail is an OEM component for Bosch bottom-mount refrigerators. It supports adjustable glass shelves inside the fridge and freezer compartments.

Symptoms of a bad rail can include scratching shelves from misalignment, sagging shelves from loose fits, or complete rail disengagement interrupting functionality. 

Causes of a bad rail include:

• Shelves that do not slide smoothly  
• Gaps allowing items to fall through
• Loose fittings jeopardizing the stability of stored goods
• Sagging or dislodged shelves prevent access

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement screw is a direct-fit fastener used to secure panels and small components. It restores proper attachment and helps eliminate loose or rattling parts for a secure appliance fit. What it does

• Secures panels, brackets, and trim to restore proper alignment and prevent movement
• Helps stop rattling, vibration noise, and parts that shift or come loose
• Matches OEM thread and length for reliable fit when it's the correct screw for the repair
• Used where original mounting hardware is missing, stripped, or damaged

• One replacement screw

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid thread damage or cracked panels
• This screw matches the original part by comparing size, thread, and head style before installation

This replacement screw is a direct-fit fastener used to secure panels and small components. It restores proper attachment and helps eliminate loose or rattling parts for a secure appliance fit. What it does

• Secures panels, brackets, and trim to restore proper alignment and prevent movement
• Helps stop rattling, vibration noise, and parts that shift or come loose
• Matches OEM thread and length for reliable fit when it's the correct screw for the repair
• Used where original mounting hardware is missing, stripped, or damaged

• One replacement screw

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid thread damage or cracked panels
• This screw matches the original part by comparing size, thread, and head style before installation

The Drawer Slide Rail is an OEM component specifically designed for select Bosch refrigerator-freezer combinations. Housing the freezer drawer, its extruded aluminum rails ensure a smooth roll-out. Weighed durability supports maximum ice storage.  

Symptoms of faulty freezer drawer rails involve squeaking or binding preventing easy access. Overloading causes deformation requiring timely replacement.

Causes of bad freezer drawer rails commonly include typical wear-reducing friction-fit. Exposure to spills hastens inner-track rust-out necessitating change.

Causes of a bad freezer drawer rail involve:

• Cracks occurring from excess weight imposition   
• Separated joining clips compromising alignment
• Worn steel bearings inhibiting silky movement

Note: Left side

This OEM Bosch part is also compatible with some Thermador, Gaggenau, and Dacor refrigerator-freezer models. Replace to retain convenient access through a dependable motion for many seasons of use.

The Rail is an OEM component for Bosch bottom-mount refrigerators. It supports adjustable glass shelves inside the fridge and freezer compartments.

Symptoms of a bad rail can include scratching shelves from misalignment, sagging shelves from loose fits, or complete rail disengagement interrupting functionality. 

Causes of a bad rail include:

• Shelves that do not slide smoothly  
• Gaps allowing items to fall through
• Loose fittings jeopardizing the stability of stored goods
• Sagging or dislodged shelves prevent access

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement screw is a direct-fit fastener used to secure panels and small components. It restores proper attachment and helps eliminate loose or rattling parts for a secure appliance fit. What it does

• Secures panels, brackets, and trim to restore proper alignment and prevent movement
• Helps stop rattling, vibration noise, and parts that shift or come loose
• Matches OEM thread and length for reliable fit when it's the correct screw for the repair
• Used where original mounting hardware is missing, stripped, or damaged

• One replacement screw

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid thread damage or cracked panels
• This screw matches the original part by comparing size, thread, and head style before installation

This replacement vegetable container is the clear crisper drawer that stores fruits and vegetables, helping keep produce organized and contained inside the refrigerator. It restores storage capacity and protects items from spills. What it does:

• Holds and organizes fresh produce and other refrigerated items
• Replaces cracked, chipped, warped, or missing vegetable/crisper drawers
• Helps prevent spills from spreading onto lower shelves
• Restores smooth sliding and proper fit in the fridge cavity

• One vegetable container

• Slide the old drawer out and lift to remove; set the new container into the same tracks until it seats
• Check rails and supports for damage and clean tracks before installing
• Handle with care to avoid cracking; use gloves if edges are sharp

The Tank is an OEM component specifically designed for select Bosch bottom-freezer refrigerator models. Containing chilled water for temperature regulation, its sturdy plastic construction withstands years of daily use. Proper functioning helps maintain consistent cooling performance.

Symptoms of a faulty tank involve leaks compromising refrigeration. Mineral deposits impeding circulation or cracking from prolonged interior exposures require replacement. 

Causes of a bad tank can involve splits from impact incidents during delivery and installation posing internal damage risks. Regular mineral accumulation also impacts circulation necessitating periodic cleaning.

Causes of a bad tank include:  

• Fluctuating interior temperatures and compromised cooling
• Water puddles developing around the refrigerator base
• Ice formations in compartments affecting usability

This OEM Bosch part is also compatible with some Thermador, Blomberg, and Dacor bottom-freezer refrigerator models. 
 

This temperature sensor monitors appliance temperature and sends temperature readings to the control board so the appliance can regulate heating and cycles. It's a direct-fit replacement designed to restore correct temperature feedback. What it does:

• Measures water/air temperature and converts it to a signal for the control board
• Helps the appliance maintain proper cycle temperatures and timing
• Can resolve temperature-related errors, incorrect water temperature, or failed cycle heating
• Works with the appliance's existing wiring harness and control system

• One temperature sensor

• Disconnect power to the appliance before starting any repair
• Handle the sensor and connector carefully to avoid damage to the probe or wiring
• Reinstall in the same orientation and secure all connectors for accurate readings

This replacement access cover restores the appliance's exterior finish and protects internal components from dust, debris and accidental contact. It helps keep parts secure while maintaining the original appearance. What it does:

• Shields internal wiring and components from dirt and loose objects
• Prevents accidental contact with moving or electrical parts
• Helps reduce noise by securing loose openings or panels
• Restores a finished look when the original cover is cracked, missing, or damaged

• Disconnect power to the appliance before beginning any work.
• Use basic hand tools to remove mounting screws and install the cover; keep fasteners for reassembly.
• Handle edges carefully to avoid cuts and align tabs before seating the cover.

Replacement fan motor that powers the appliance's blower to circulate air for proper cooling and ventilation. Restores airflow and helps reduce noisy operation, overheating, or poor circulation caused by a failed motor. What it does:

• Drives the blower wheel to move air through the appliance, addressing weak or no airflow.
• Stops or reduces unusual grinding, rattling, or humming noises when the original motor fails.
• Restores proper ventilation to help prevent overheating and maintain consistent temperature.
• Used as the specified replacement when this part number is required.

• Disconnect power to the appliance before servicing; for gas models, shut off the gas supply as well.
• Handle wiring connectors carefully and match connector positions/colors during reassembly.
• Basic hand tools are typically required.

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation