Parts for Bosch B36IT71NNP/11: Compressor Parts

This is an active carbon filter designed to remove odors from inside the refrigerator compartment. It absorbs and neutralizes food smells to keep the interior air fresh. Replace this filter if you notice persistent unpleasant odors inside the refrigerator despite cleaning, or on a regular maintenance schedule as recommended.

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Power cord for refrigerators and freezers. Connects appliance to wall outlet. Replace if cord is frayed, damaged, cracked, or missing its prongs.

Leveling foot installs at the refrigerator base to support and level the unit. Replace if worn, cracked, broken, or missing to restore stability.

Fix water dispenser not working or leaking with this outlet valve. Controls water flow from reservoir to dispenser. Moderate 30-45 minute repair.

Mounting clip for refrigerator interior components. Secures shelves, bins, or panels in place. Replace if cracked, broken, or missing for proper fit.

Fixes incorrect temperature readings or frequent cycling. This thermistor monitors compartment temp for proper cooling. Moderate DIY repair, 30-45 minutes.

This is a wheel assembly designed for use in a refrigerator or freezer. It supports the smooth rolling movement of components such as drawers, baskets, or the unit itself. Replace this wheel if it is cracked, worn, or no longer rolling freely, which can cause drawers to stick or the appliance to be difficult to move.

This main control board manages all electronic functions of your refrigerator including temperature control, defrost cycles, and display operations. It processes sensor inputs and controls compressor and fan operation. Replace this if your refrigerator doesn't cool, displays error codes, or electronic controls stop working.

Condensate water container collects moisture from your refrigerator's cooling system. Replace if cracked, broken, or leaking to prevent water damage.

This is a filter drier used in the sealed refrigeration system to remove moisture and contaminants from the refrigerant lines. It is a small cylindrical component typically located along the refrigerant tubing between the condenser and the capillary tube. Replace this part if the refrigerator or freezer is not cooling properly due to a restricted or saturated drier, typically during a sealed system repair.

This plate is a replacement support plate used in the appliance's internal assembly to secure and stabilize components. It restores correct positioning of attached parts so assemblies sit firmly and operate quietly. What it does:

• Provides a stable mounting surface to hold internal components in proper alignment
• Helps reduce movement and vibration of attached parts during operation
• Keeps assemblies secured to prevent rubbing or interference with other parts
• Supports reliable operation by maintaining correct spacing and positioning

• One replacement plate as shown

• Verify appliance is powered off and disconnected before starting any repair
• Inspect surrounding fasteners and mounting points; replace any damaged hardware
• Tighten screws to snug only—avoid over-torquing which can deform the plate

Interior mounting plate for bottom-mount refrigerators and freezers. Replaces cracked, broken, or missing plates that secure internal components.

Hearing rattling or loose parts inside your refrigerator? This mounting bracket secures internal components to eliminate noise and restore proper alignment.

Lower trim panel that covers the kick area at the bottom of your refrigerator. Replace if cracked, dented, or missing to restore a finished look.

Lower trim panel that covers the kick area at the bottom of your refrigerator. Replace if cracked, dented, or missing to restore a finished look.

Decorative base panel that covers the bottom front of your refrigerator. Replace if cracked, broken, discolored, or missing to restore appearance.

Adhesive mounting tape secures trim, wiring, and small components while reducing rattles and moisture intrusion. Replace when worn or loose. Verify fit with your model number before ordering.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

This is a housing component used inside the freezer section of the refrigerator. It serves as a protective enclosure for internal parts such as sensors, lights, or fan assemblies, helping to keep them properly positioned and shielded. Replace this housing if it is cracked, broken, or warped, which can affect the proper operation of the components it protects.

Fixes ice maker overflow and water leaking into freezer. This water inlet valve controls water flow to your dispenser and ice maker. DIY repair.

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Secures the water filter in your refrigerator for a snug, leak-free fit. Replace if lost during filter changes, cracked, damaged, or worn out over time.

This is a protective housing or case that encloses an internal component in a range or oven. It shields the enclosed part from heat, moisture, or physical damage during operation. Replace this housing if it is cracked, warped, or damaged, which could leave internal components exposed and vulnerable to malfunction.

If your refrigerator isn't cooling or runs constantly, the compressor may have failed. This critical component pressurizes refrigerant through the system.

Fix a refrigerator that won't cool or runs constantly with this compressor. Circulates refrigerant through the cooling system to maintain proper temperatures.

Replace a cracked or missing housing cover that exposes internal components to debris and moisture. Restores proper sealing and component protection.

Fix control panel issues or unit not responding with this refrigerator control transformer. Steps down voltage to power electronic controls reliably.

A replacement shock absorber that cushions and appliance component to reduce noise and stabilize movement for smoother, more controlled operation. Restores dampening to doors or tubs that close unevenly or vibrate. What it does:

• Dampens and slows movement to prevent slamming and reduce impact wear
• Stabilizes panels or tubs to cut down on vibration and rattling sounds
• Helps maintain even, controlled closing and opening motion
• Commonly used when a door feels loose, drops, or closes too quickly

• Disconnect power (and water if applicable) before attempting service
• Retain original mounting hardware; only replace items explicitly listed as included
• Ensure correct orientation and secure fasteners; test operation after installation

The Sheet is an OEM part for Bosch refrigerators. It forms the interior lining of the machine compartment, which houses the refrigeration system and other essential components.

This sheet acts as a protective barrier, shielding the internal components from potential damage and ensuring their proper functioning.

Causes of a bad sheet can include wear and tear over time, accidental damage during maintenance or repair work, or exposure to moisture or extreme temperatures that can degrade the material.

Symptoms of a bad sheet include:

• Reduced cooling efficiency
• Increased energy consumption
• Condensation buildup inside the refrigerator
• Unusual noises from the machine compartment

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Water Valve is an OEM part for Bosch refrigerators. It regulates the flow of water into the ice maker and water dispenser.

The water valve allows water to fill the ice maker bucket or flow through the dispenser chute on demand. It controls water pressure and assists in proper ice formation.
Over time, mineral buildup can affect a water valve's ability to open and close smoothly. 

Symptoms of a bad water valve include:

• Slow or inadequate water flow from the dispenser
• Ice maker not filling or producing ice fully
• Water leaking inside refrigerator compartments
• No water dispensing when button is pressed

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Refrigerator not cooling or compressor not starting? This start relay controls the signal that initiates the compressor. Direct replacement part.