Parts for Kenmore 110.22352512 (11022352512, 110 22352512): Console And Water Inlet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This electronic control panel is the front console assembly that houses the range/oven user interface and display, restoring control and readable status information for an appliance with a damaged or unresponsive console. What it does:

• Provides the touchpad/buttons and display used to select oven/range functions and settings
• Translates user inputs into commands for the control board and shows temperature/time/status feedback
• Commonly replaced for cracked or burned panels, non-responsive keys, or a blank/flickering display
• Works with the existing control electronics when the face/console assembly is the faulty component

• Disconnect power at the breaker before attempting any service to avoid shock or injury
• Handle the display and ribbon connectors carefully to avoid damage to the circuit traces
• Replacement typically requires removing the upper console or backguard and disconnecting wiring harnesses—keep mounting hardware and fasteners organized

This cycle switch controls and redirects power to the washer's/dryer's timer or motor circuits so the appliance advances through its programmed cycles. It restores proper cycle selection and progression when the knob does not change settings. What it does:

• Routes electrical signals to the correct cycle/timer contacts so selected programs run.
• Commonly replaced when cycles won't advance, the selector won't engage, or the control knob feels loose or unresponsive.
• Helps resolve intermittent operation or failure to start specific wash/dry functions tied to cycle position.
• Matches OEM function for reliable replacement of the selector switching stage.

• Disconnect power before servicing to avoid shock—electrical expertise recommended.
• Verify knob/timer compatibility and orientation before final assembly.
• Handle gently and avoid bending terminals; test function before reassembling the cabinet.

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

• Loose console assembly that is not securely fastened  
• Misaligned or dangling controls that do not sit flush
• Dislodged console at risk of detaching from housing
• Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic control board is the main circuit board that runs the appliance's functions and user interface, restoring control when the original board is faulty or unresponsive. It replaces the appliance's primary logic/control module to help regain normal operation. What it does:

• Interprets user inputs and starts the selected cycles or functions
• Controls timing, sequences, and power to motors, heaters, valves, or displays
• Common symptom areas: blank or flashing display, unresponsive buttons, or cycles that won't start/complete

• One electronic control board

• Disconnect power (unplug or turn off breaker) before attempting replacement
• Handle the board by its edges and avoid touching components; discharge static by grounding yourself
• Verify connector seating and orientation before reapplying power

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This cycle switch is the user-controlled selector that tells the washer which wash sequence to run, restoring normal cycle selection and operation. It provides a direct replacement for a worn or non-responsive cycle selector. What it does:

• Selects and routes electrical signals to start the chosen washer cycle
• Restores reliable selection when the dial won't change cycles or the machine won't advance
• Helps resolve intermittent or no-response issues from the cycle selector control
• Works as the mechanical/electrical interface between the user dial and the washer's control system

• (1) cycle switch (selector)

• Turn off and unplug the appliance before attempting any service
• Access may require removing the control console or rear panel; handle wires and connectors gently
• Only install parts that match the appliance's original part number

This replacement power cord restores the electrical connection to your appliance so it can receive consistent power and operate safely. It's a direct-fit service part used when the original cord is damaged or no longer supplying power. What it does:

• Provides the main electrical connection from the wall outlet to the appliance
• Replaces frayed, cut, or melted cord insulation that can cause power loss or shorts
• Stops intermittent or no-power symptoms caused by a damaged cord
• Restores safe, reliable power delivery when the original cord is faulty

• Always disconnect power at the breaker or unplug the appliance before installation
• Route and secure the cord away from sharp edges, moving parts and high-heat areas

Size: 10 - 24 x 3/8

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The timer knob assembly lets you turn and set the appliance's mechanical timer. When the original knob is cracked, stripped, or missing, this replacement restores a secure grip so cycles or time settings can be selected reliably.

• Attaches to the timer shaft to select cycles or time settings
• Restores positive engagement when the original knob is worn or broken
• Common fix for a knob that spins freely, slips, or falls off
• Helps resolve difficulty setting or starting a cycle caused by a damaged knob

• Disconnect power to the appliance before replacing the knob
• Pull the old knob straight off the timer shaft; if tight, gently wiggle while pulling
• Align the new knob with the shaft and press firmly until fully seated
• Verify smooth operation through the full range of timer positions

This genuine Whirlpool control knob provides a reliable replacement for a worn, cracked, or missing appliance control. It restores a solid grip and smooth control operation so you can set cycles and temperatures with confidence. What it does:

• Replaces a broken, loose, or missing control knob so the control shaft can be turned securely
• Restores tactile grip and clear pointer alignment for accurate settings
• Stops slipping or spinning that prevents proper selection of cycles or temperatures
• Compatible with original control shafts that use a push-on or screw-retained knob design

• One control knob

• Disconnect power to the appliance before servicing to avoid injury
• Remove the old knob by pulling straight off the control shaft; retain any small screw or retaining clip if present
• Align the replacement knob with the splines on the control shaft and push into place; secure with the original screw or clip if required

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Harness Wiring is an OEM part for Whirlpool washing machines. It comprises the bundled electrical wires and connectors that power internal components and circuits within the machine.

Causes of a bad harness and wiring can include cuts, cracks, or fraying of insulating casings over time, corroded connectors from moisture exposure, or wire fatigue from continuous bending during operation.

Causes of a bad harness wiring include: 

• Failure or intermittent operation of components due to broken circuits  
• Arcing, sparking, or burning smells due to exposed or shorted wires
• Restricted access to internal parts due to tangled or bound wires

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part ensures that the right amount of water enters the washing machine at the correct times, contributing to optimal washing conditions and efficient use of water.  

A failing Water Inlet Valve can be caused by mineral deposits from hard water, which can clog or restrict water flow, or by electrical failures that prevent the solenoids from operating correctly.  

Symptoms of a bad Water Inlet Valve include:

• The washing machine not filling with water
• Water filling too slowly or continuously
• Water leaking inside the washer
• Unusual noises during the fill cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This wire harness routes power and control signals between the appliance's electrical components, restoring proper connectivity and operation when the original harness is damaged or faulty. It's a direct-fit electrical assembly designed for straightforward replacement. What it does:

• Provides the main electrical connections between control, power source, and other components
• Replaces damaged, frayed, or burned wiring that can cause intermittent or complete loss of function
• Helps eliminate symptoms like no power to controls, intermittent operation, or blown fuses/trips
• Maintains factory-style connector fit and routing to reduce vibration and wear

• One complete wire harness assembly

• Always disconnect power (unplug or shut off circuit breaker) before inspecting or replacing wiring
• Route harness and secure connectors per the appliance wiring diagram to avoid pinching or heat exposure

This replacement wire harness routes power and control signals between the appliance's electrical components to restore reliable operation and proper connections. It replaces a damaged or worn harness to help stop intermittent power loss or component failures. What it does:

• Provides factory-style wiring connections for controls, motors, sensors and switches
• Restores interrupted circuits that can cause intermittent or no operation of affected components
• Replaces burnt, frayed or broken wiring that can cause arcing or poor contact
• Ensures correct routing and connector fit to prevent chafing and shorting

• Disconnect power to the appliance before starting any repair; verify power is off
• Compare the new harness to the old one for connector type and routing before installing
• Route harness to avoid sharp edges and moving parts; secure with existing clips or ties
• If connectors are damaged or corroded, replace them; do not use the appliance with exposed or repaired wiring

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.