Parts for Kitchenaid KUCS03CTWH2: 04 - Container Parts

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

• Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
• Helps keep components aligned and secure during operation
• Replace if the original is missing, rusted, stripped, or damaged
• Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

• Disconnect power; shut off gas or water supply before servicing
• Support the panel or part being attached; hand-start threads to avoid cross-threading
• Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
• If multiple matching screws secure a part, consider replacing them as a set for consistent hold

This replacement refrigerator door handle lets you open and close the door with a secure, comfortable grip and restores normal door operation and appearance. Designed to match the original cabinet fit and finish. What it does

• Replaces a cracked, loose, or broken door handle so the door can be opened and closed safely.
• Provides the same grip and leverage as the original part to prevent slippage and damage.
• Restores the refrigerator's exterior appearance when the original handle is scratched or worn.
• Helps prevent further cabinet damage caused by using towels or alternate grips.

• High-level: Remove any interior shelves or panels that block access before starting.
• Use common hand tools; support the door while removing and reinstalling the handle to avoid strain on the hinges.
• Follow manufacturer instructions and tighten fasteners securely but do not overtighten.

This is a replacement refrigerator door handle that restores a secure grip and proper door operation. It replaces a cracked, broken, or worn handle so you can open and close the door safely and confidently. What it does:

• Replaces a damaged or loose refrigerator door handle so the door can be opened and closed normally
• Restores a comfortable, secure grip when pulling the refrigerator door
• Prevents sharp edges and safety hazards from a cracked or broken handle
• Helps maintain proper door alignment and sealing when handle mounting is restored

• One replacement refrigerator door handle

• Designed for straightforward replacement; reinstall using existing mounting hardware when possible
• Disconnect power to built-in lighting/components only if panels or wiring are exposed during installation
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage

This genuine handle assembly replaces a damaged or worn refrigerator door handle so you can open and close the door securely and comfortably. It restores the grip and appearance of the door without replacing the whole door. What it does

• Replaces a cracked, broken, loose, or missing refrigerator door handle
• Restores proper grip and lever action for opening the refrigerator door
• Helps prevent injury from jagged or damaged handle edges
• Returns the door to a finished appearance and functional use

• Disconnect power to the appliance or unplug the refrigerator before any repairs when required by the manufacturer.
• Support the door while removing/installing the handle to avoid straining hinges or tipping.
• Typical installation requires basic hand tools (screwdriver, socket); follow OEM instructions for correct fastener torque and orientation.

This replacement control panel restores the appliance's front console where buttons and the display sit, improving usability and appearance. It provides a direct swap to replace a cracked, faded, or non-responsive console surface. What it does

• Replaces the front console surface and button/display mounting area.
• Restores tactile button response and dial/display visibility when the original panel is cracked, worn, or cosmetically damaged.
• Addresses issues where the console overlay is peeled, discolored, or preventing proper button contact.
• Works as the visible user interface housing for the appliance's controls.

• One control panel (console) as pictured.

• Disconnect power to the appliance before starting any repair to avoid shock or damage.
• Removal typically requires removing the trim/console fasteners and carefully separating the old panel from the console assembly.
• Handle the replacement panel carefully to avoid scratches; align mounting tabs before re-securing hardware.

This handle spacer positions and secures a dishwasher or appliance door handle, keeping the handle aligned and preventing rubbing or binding for smooth door operation. It's a small replacement piece that restores proper handle fit. What it does:

• Provides a stable mounting gap between the handle and door/frame to ensure correct alignment
• Prevents handle contact with the door surface that can cause wear or noise
• Restores proper spacing after a broken, worn, or missing spacer
• Suitable when the handle feels loose, sits crooked, or rubs against the door

• One handle spacer

• Install with the appliance door open on a stable surface; follow the appliance manufacturer's fastening sequence
• Use hand tools only unless the OEM instructs otherwise; avoid overtightening fasteners
• Disconnect power or follow manufacturer safety instructions when required for handle removal

This replacement container restores a secure, factory-fit compartment in your appliance. Install a new container when the original is cracked or broken to keep contents properly held and nearby parts aligned as designed.

• Provides the designated compartment to hold contents securely
• Interfaces correctly with its mounting points, guides, or adjoining parts
• Replaces cracked, warped, or broken containers that won't stay seated
• Helps prevent spills, jams, or interference with nearby components

• Disconnect power to the appliance; shut off water supply if applicable
• Wear cut-resistant gloves—damaged plastic edges can be sharp
• Move any screws, covers, or inserts from the old part to the new one
• Align tabs, tracks, or snaps and press into place without forcing

Fits 15 and 18 inch compactors. This kit is for securing the compactor bags. Kit contains a set of 4 buttons and screws.

This replacement foot pedal mounts at the base of the trash compactor to provide hands-free drawer release. Replace a worn, cracked, or missing pedal to restore easy opening, proper latch engagement, and smooth operation. What it does:

• Engages the drawer release mechanism when stepped on
• Enables hands-free access when your hands are full
• Helps ensure the drawer opens and latches correctly
• Helps with symptoms such as a broken/missing pedal, difficulty opening the drawer, or a pedal that feels loose or does not return

• One foot pedal

• Disconnect power to the compactor and empty the drawer before servicing
• Remove the toe panel or mounting screws to access the pedal attachment points
• Reuse existing mounting hardware from the original pedal, aligning the new pedal correctly
• Verify smooth pedal action and proper drawer release before restoring power

Size: 8-32 x 3/8 inch.

This door lock latch assembly secures the washer door during operation so cycles can run safely and water stays contained. It replaces a worn or damaged latch to restore proper door locking and cycle start. What it does

• Secures and locks the washer door during wash and spin cycles so the appliance can operate normally.
• Triggers the door-closed sensor/switch that allows the washer to start and continue a cycle.
• Helps prevent accidental door opening and reduces the risk of leaks during operation.
• Common symptoms indicating this part may be needed: washer won't start, door won't latch or lock, or the latch feels loose or broken.

• Always disconnect power to the appliance before inspecting or replacing the door lock latch.
• Handle the door and glass carefully to avoid damage; align the latch with the strike before tightening fasteners.
• After installation, test a short cycle (no clothes) to ensure the door locks and the washer starts properly.

Color: White

Color: Black

Color: Stainless

This safety switch actuator engages the door/interlock switch so the appliance senses a closed, secure door and will run as intended. Replacing a worn actuator restores reliable door engagement and control-system signaling. What it does:

• Moves the door latch into position to trip the appliance's safety/interlock switch
• Ensures the control board senses a closed door so cycles can start or continue
• Common symptom: appliance won't start or stops when the door is shut or nudged
• Common symptom: door won't fully latch or feels loose when closing

• One safety switch actuator

• Disconnect power (and water if applicable) before starting any repair
• Remove exterior panels or door assembly as needed to access the actuator; keep fasteners organized
• Verify switch alignment with the actuator and test operation before reassembly
• Wear gloves and eye protection

Size: 8 x 1/2 ab.

This container roller bearing supports the trash compactor drawer as it slides on its tracks. Replacing a worn bearing restores smooth, quiet movement and helps keep the container aligned for easy opening and closing.

• Provides low-friction support so the drawer glides smoothly on the tracks
• Helps maintain proper container alignment and stability
• Reduces squeaks, grinding, and sticking during operation
• Common symptoms: drawer hard to open/close, scraping noises, binding or uneven movement, visible wear/flat spots on the bearing

• Disconnect power to the compactor before servicing
• Remove and empty the drawer to access the bearing location
• Install the new bearing in the same orientation; transfer any hardware as needed
• Inspect rollers, axles, and tracks; replace any additional worn parts for best results

Size: 3\8-24 inch.

This E-ring retaining clip secures latch components by locking onto a shaft or pin so the latch assembly stays in place. It's a small but essential metal clip that prevents latch parts from slipping off and causing door or panel issues. What it does:

• Locks onto latch shafts or pins to hold the latch assembly together
• Prevents the latch or related parts from sliding off during operation
• Common symptoms: door or panel won't stay closed, rattling or loose parts near the latch, visible clip missing or deformed
• Helps restore secure engagement of the latch when the clip is intact and correctly positioned

• One E-ring retaining clip

• Disconnect power or unplug the appliance before beginning any repair
• Use pliers or snap-ring tools to remove/install the clip; avoid excessive force that could deform it
• Replace the clip if it is bent, cracked, or worn — do not reuse a damaged clip

This latch plate secures the appliance door to the cabinet, providing the positive engagement needed for proper door closure and operation. It helps restore a door that won't stay closed or won't trigger door switches. What it does:

• Acts as the door strike that the latch engages to hold the door shut
• Ensures the door closes firmly so door switches can register a closed state
• Can stop issues like a loose or misaligned door, or a door that won't remain closed
• Restores proper alignment and engagement without replacing the full latch assembly

• Disconnect power (and gas if applicable) before servicing
• Remove the door or access panel to reach the latch area
• Inspect related latch components and alignment; replace only the damaged part
• Use basic hand tools; tighten fasteners securely but avoid overtightening