Parts for Ge CES700P4M4W2: Control Panel Cooktop Parts

Cracked or shattered cooktop glass? This complete rangetop glass assembly restores your electric range's cooking surface and protects internal components.

Fix a non-working convection fan or cooling blower with this range blower motor wiring harness. Common repair for ovens with electrical failures.

This hot surface indicator is the replacement indicator light that shows when an electric cooktop surface is still hot, helping prevent accidental burns and improving user awareness after cooking. Fits select electric ranges and cooktops. What it does:

• Illuminates when a cooktop heating element or radiant surface remains hot after use
• Signals residual heat even if the element is off, reducing burn risk
• Replaces a cracked, non-lighting, or intermittently working indicator light
• Works with the range/cooktop's surface control circuitry to display status

• Disconnect power to the appliance at the breaker before beginning any work
• Replacement typically involves removing the cooktop glass or control panel
• Handle the indicator and surrounding glass carefully to avoid damage or misalignment

This indicator sleeve is a small control-knob marker that restores a clear position marker and snug fit on the control shaft for reliable setting selection. It improves dial visibility and stabilizes the knob during use. What it does:

• Covers and centers the control shaft so the knob sits straight and turns smoothly
• Provides a visible pointer for selecting temperature or power settings
• Replaces cracked, worn or missing sleeves that make knob position hard to read
• Helps eliminate wobble or looseness between the knob and control shaft

• One indicator sleeve

• Disconnect power to the appliance before servicing
• Remove the control knob (pull straight off) to access the sleeve
• Press the sleeve onto the shaft by hand until fully seated; no special tools generally required
• If the knob or shaft is damaged, inspect and replace as needed for secure fit

Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.

Warming zone not maintaining temperature or keeping food hot? This radiant warming element restores gentle heat for plates and cooked dishes on your range.

The Triple Haliant Element is an OEM part for GE cooktops and ranges, designed to provide versatile and powerful heating options. This element features a triple-ring design that allows for three different sizes of cookware to be heated efficiently on the same burner. It's ideal for situations requiring precise temperature control and flexibility, such as when cooking with large pots or pans that need even heat distribution.  

Causes for a Triple Haliant Element to fail can include prolonged use leading to wear and tear, overheating that damages the internal components, or electrical issues such as short circuits. 

Symptoms of a bad Triple Haliant Element include:

• The element does not heat up
• Only parts of the element heat up
• Unusual fluctuations in heat levels

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Burner element burned out and quit working? This dual radiant surface element restores fast, even heating beneath glass cooktops. 10-15 minute repair.

Replace a failed 8-inch radiant surface element when your burner won't heat. Restores proper heating response. DIY-friendly with basic tools.

This seal valve creates a watertight seal inside the appliance valve assembly to help prevent leaks and ensure proper water routing. Replace a worn or cracked seal to stop drips and protect surrounding components from water damage. What it does

• Seals the valve assembly to prevent water leakage at valve connections
• Helps maintain correct water flow through the valve body
• Commonly replaced when you see leaking, dripping, or water pooling under the appliance

• One seal valve

• Disconnect power and shut off the water supply before starting work
• Only install in a clean, dry valve area; replace any damaged valve parts discovered during service
• Use appropriate tools and follow OEM instructions for valve disassembly/reassembly

This replacement lens is the interior light cover that protects and diffuses the appliance light so you can see the cavity clearly while shielding the bulb from spills and debris. It restores proper light diffusion and protection after damage or loss. What it does:

• Covers and protects the interior light bulb from food, grease, and impact
• Diffuses light for more even interior illumination
• Helps prevent direct contact with the hot bulb for safer operation
• Restores appearance when the original lens is cracked, chipped, or missing

• One replacement lens

• Disconnect power to the appliance before starting work to prevent electrical shock.
• Allow the bulb to cool completely before removing or installing the lens to avoid burns or breakage.
• Handle the lens carefully—use gloves to protect hands and prevent fingerprints on clear surfaces.
• Follow the appliance owner's manual for lens removal/installation steps; do not force or overtighten.

Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.

Trim kit for electric and gas ranges. Installs around the cooktop or control panel. Replace if cracked, discolored, warped, or missing pieces affect appearance.

Stainless steel #8-18 x 3/8" screw secures panels, brackets, and components in ranges, cooktops, and ovens. Replace if stripped, missing, or corroded.

This glass and touch board replacement restores a cracked or unresponsive cooktop control surface, letting the oven's touch controls register commands and keeping the front control area sealed and finished. Fits select GE ranges with a glass touch control panel. What it does:

• Replaces the glass touch surface and integrated control board so touch buttons and display respond correctly
• Helps restore oven functions like bake, broil, timers and touch-set temperature controls
• Addresses symptoms such as unresponsive or intermittent touch keys, cracked or scratched control glass, and erratic control behavior
• Reinstates a smooth, sealed front surface to prevent debris from entering the control area

• Disconnect power to the appliance before starting and verify with a meter; electrical safety is required.
• Handle the glass carefully to avoid damage or injury; use appropriate gloves and eye protection.
• Replacement typically requires removing the control panel and a few fasteners; keep screws and trim parts organized.

This fastener nut secures appliance components and wiring connections to keep assemblies stable and aligned during normal operation. It's a small replacement part that restores proper fastening where the original nut is missing, stripped, or damaged. What it does:

• Secures mounting studs, terminals, or brackets to prevent parts from coming loose
• Restores a solid mechanical and electrical connection where a worn or missing nut causes poor contact
• Helps stop vibration-related noise or movement from loose assemblies
• Used wherever a matching threaded stud or bolt requires a retained fastener

• One replacement nut (quantity: 1)

• Disconnect power and water before servicing the appliance
• Start threads by hand to avoid cross-threading; then tighten with the correct size wrench or socket
• Tighten securely but do not overtighten—over-torquing can strip threads or damage components
• Replace if threads are damaged, corroded, or if the nut no longer holds securely

Replace a faulty control switch when your range burner won't turn on or off properly. This switch assembly restores reliable operation to your heating circuit.

Replacement 8-18 x 5/16 screw secures range panels, brackets, and components. Needed when original fastener is stripped, missing, or damaged.

Seals the gap between your range body and control panel to contain heat and prevent spills from entering internal components. Replace if heat escapes or moisture gets inside. Confirm fit by your model number.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

The Cooling Fan Sensor is an OEM replacement part for GE ovens and ranges. It is a critical component that monitors and regulates the operation of the cooling fan, ensuring proper ventilation and temperature control within the appliance.

Symptoms of a bad cooling fan sensor:

• Overheating issues, with the oven or range becoming excessively hot
• Failure of the cooling fan to turn on or operate correctly
• Error codes or warning lights related to temperature or ventilation problems
• Potential safety hazards due to inadequate cooling and heat buildup

Causes of a faulty cooling fan sensor can include exposure to high temperatures over time, electrical malfunctions, or physical damage to the sensor or its wiring.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ovens and ranges.

Range overheating or electronics failing? This tangential blower fan circulates air to cool internal components. DIY-friendly replacement part.