Parts for Ge JBS460DM6WW: Control Panel Cooktop Parts

This replacement control knob fits the surface burner valve on many ranges and cooktops. It restores smooth on/off operation and flame adjustment when the original knob is cracked, stripped, wobbly, or missing.

• Press-fits onto the valve stem to turn the surface burner on/off and set flame level
• Replaces knobs that are cracked, stripped (spins or slips), loose, melted, or missing
• Helps restore accurate feel and alignment so settings match the dial
• Common signs: knob rotates without engaging the valve or does not stay seated

• Ensure all burners are off and the appliance is cool before servicing
• Pull the old knob straight off the valve stem; do not pry against the control panel
• Align the new knob with the stem flats/notch and press firmly until fully seated
• If the knob won't seat, inspect the stem for debris or damage before reattempting

If your range burner won't heat, stays on high, or cycles erratically, a failed infinite switch is likely the cause. Restores smooth temperature control.

Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.

Wiring harness for electric range pilot light indicator. Replace when control panel light fails or flickers. Verify fit with your model number.

Oven won't heat to the right temperature or overheats? This electric range thermostat monitors and regulates oven temperature for consistent cooking results.

Fix unresponsive or intermittent range controls with this sealed rocker switch. Restores reliable on/off operation for panel buttons and switches.

This is a right-side end support bracket, white in color, used to secure and stabilize internal components within the oven or range cavity. It provides structural support to ensure proper alignment of racks or panels. Replace this part if it is cracked, broken, or if internal components appear misaligned or loose.

This is a metal end support bracket located at the back of the range. It provides structural reinforcement and helps secure internal components in the proper position. Replace this part if it is bent, cracked, or corroded, which can cause misalignment or rattling noises during operation.

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

Pivot pin that connects the oven door hinge to its mounting bracket. Replace if worn, broken, or missing to restore smooth door operation and alignment.

Mounting screw hardware for ranges and cooktops. Replace missing, stripped, or corroded screws used to secure panels, brackets, or components.

Covers and protects the indicator lamp opening on your range control panel. Replace when cracked, discolored, or missing to restore visibility. Confirm fit with your model number.

The 6" Surface Burner with Sensor is an OEM part for GE ranges. This part provides precise heating for cooking on your range's stovetop. The integrated sensor helps regulate the burner temperature, ensuring even and consistent cooking results.

Common causes of a bad surface burner include electrical issues, wear and tear over time, or damage from excessive heat or spills.

Symptoms of a bad surface burner with sensor include:

• Burner not heating up
• Inconsistent or uneven heating
• Burner temperature not being properly regulated
• Error codes or malfunction indicators on the range display

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Support rod that props up the lift-up top on your range. Holds the top panel securely in the raised position for cleaning or servicing. Replace if bent or missing.

Chrome drip bowl installs beneath 6-inch coil burners on electric ranges. Catches spills and drips during cooking. Replace when rusted, worn, or stained.

This is an 8-inch coil-style surface burner element designed for electric ranges equipped with temperature-sensing technology. It plugs directly into the burner receptacle on the cooktop and provides heat for larger pots and pans. Replace this element if the burner no longer heats evenly, fails to turn on, or has visible damage such as pitting, warping, or broken coils.

This 8-inch drip bowl installs under your range burner to catch grease and spills. Replace if yours is rusted, cracked, warped, or heavily stained.

Secures wiring harness to prevent rubbing and loose connections. Replace if worn or broken to restore proper wire routing. Confirm fit with your model.

This wire harness connects a stove's surface heating element to the cooktop wiring, restoring reliable power routing to the surface unit. Replacing a damaged harness helps resolve intermittent heating and safety issues. What it does:

• Routes electrical power between the surface burner and the cooktop wiring for proper heating
• Fixes symptoms like burners that don't heat, have intermittent power, or short out when the harness is damaged
• Replaces frayed, melted, or burned wiring that can cause arcing or poor connections
• Ensures terminals line up for secure spade/plug connections and stable operation

• One surface unit wire harness

• Disconnect all power at the breaker or unplug the appliance before starting
• Inspect terminals and connectors; replace if corroded or damaged to ensure a solid connection
• Route and secure the harness away from hot parts and sharp edges to prevent future damage

Houses and protects cooktop wiring connections. Replace when the original box is damaged, corroded, or missing fasteners for safe electrical connections.

Missing or broken temperature control knob? This thermostat knob assembly restores reliable temperature adjustment and on/off control. Easy push-on install.

Burner won't seat properly or wobbles? This receptacle clip secures the surface element connection for stable, reliable heat. Simple DIY fix.

Burner not heating or terminal block burned? This electric range terminal block kit restores power to surface elements. Easy 10-15 minute DIY repair.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.