Parts for Ge JGB800DEP2BB: 02 - Control Panel & Cooktop Parts

Endcap for range installation. Replaces cracked, broken, or missing endcaps to restore proper appearance and secure trim components in place.

Replace your range's cracked or missing endcap with this structural trim piece. Installs at the end of the control panel or cooktop edge for a finished look.

Replacement right-side end support bracket that secures and aligns the range door assembly. Replace when cracked, broken, or worn to restore proper fit.

Endcap for range. Installs on the side or end of the cooktop. Replace if original is cracked, broken, missing, or worn from heat and daily use.

Seals the burner assembly to the cooktop on gas ranges. Replace when worn to restore proper ignition, stable flame, and prevent spills from entering the burner well. Confirm fit by model number.

Color: Black

White control panel trim for your range. Replaces cracked, discolored, or missing trim pieces around the touch pad area. Restores clean appearance.

Fix random beeping, locked controls, or self-cleaning errors. This control board governs display, timers, and temperature relays. Moderate difficulty.

Replace the upper back cover panel on your range. This housing component protects internal parts and completes the exterior. Order now if damaged or missing.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.

If burners won't ignite automatically but light with a match, the spark module likely failed. Accessed from the back of the range, moderate difficulty.

This rubber bumper cushions and protects appliance components from impact, vibration and rubbing, helping reduce noise and wear. It restores proper spacing where a worn or missing pad lets parts contact or vibrate. What it does:

• Acts as a soft stop to prevent panels, doors or components from striking each other
• Dampens vibration and reduces rattling or buzzing during operation
• Keeps moving parts aligned by maintaining proper clearance
• Helps prevent cosmetic damage from rubbing or repeated contact

• Locate the damaged or missing bumper and remove any debris before installing
• Press or seat the bumper into the mating hole or surface until fully engaged
• Use common hand tools if needed; avoid sharp tools that can tear the bumper
• Disconnect power or follow appliance-specific safety steps before working near electrical components

Rubber bumper cushions contact points on range doors and panels. Replace if cracked, missing, or worn to restore quiet operation and protect surfaces.

Replacement door bumper for electric and gas ranges. Prevents door from slamming and protects cabinet finish. Replace if worn, cracked, or missing.

Replacement oven door hinge for gas and electric ranges. Secures and supports the oven door for smooth opening and closing. Needed when hinge is bent, broken, or door sags. Direct fit replacement part.

Cast iron grate for the left rear burner position on your gas range. Replace this cooking grate if cracked, chipped, rusted, or damaged from heavy use.

This rangetop and bracket assembly secures and supports the cooktop surface, restoring stable burner placement and proper alignment. Replaces a bent, loose, or damaged rangetop frame so cooking surfaces sit level and components mount correctly. What it does:

• Provides structural support for the cooktop and burner components
• Holds cooktop in proper position to prevent movement or vibration during use
• Helps restore correct alignment for burners and control elements
• Commonly used when the cooktop is warped, loose, or shows gaps at the cooktop-to-frame seam

• Recommend disconnecting power and gas supply before service; follow appliance safety procedures
• Basic disassembly of the cooktop is typically required; keep fasteners organized for reassembly
• Inspect adjacent seals and gaskets during reassembly and replace if damaged

Cast iron grate for gas range cooktop. Replace if your existing grate is cracked, chipped, warped, or has broken support legs affecting cookware stability.

Cast iron cooktop grate for the right-rear burner position. Replace this grate if cracked, chipped, or damaged to restore stable pot support.

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Cooktop mounting screw secures the cooktop to frame or brackets. Replace if stripped, missing, or rusty to eliminate wobble, rattling, or lifted corners.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.

Symptoms of a bad igniter:

• Burners not lighting
• Igniter sparking erratically

The causes of a bad part can include physical damage or wear and tear over time.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

Surface burner element for cooktops and ranges. Installs on cooktop surface. Replace when burner is cracked, painted finish is damaged, or worn.

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

Replace your cracked, warped, or missing medium surface burner. Ensures even heat distribution for cooking tasks. Installs on gas range cooktops.

Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.

Color: White. Mounting screw for end caps.

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Insulation shield that installs behind the range control panel. Protects control board and wiring from oven heat. Replace if cracked, damaged, or missing.

Reversible cast iron griddle for gas ranges with flat cooking surface on one side and ridged grill on the other. Replace worn, damaged, or missing griddle.