Parts for Ge PGB910SEM4SS: 02 - Control Panel & Cooktop Parts

This right-side end support secures and centers the appliance's rotating assembly so the motor and blower run smoothly. It restores proper alignment and reduces rubbing or wobble that can cause noise or airflow issues. What it does:

• Holds the motor shaft or fan spindle in place to maintain correct rotation alignment
• Keeps the blower/fan wheel properly seated to prevent contact with housing
• Helps reduce vibration and audible noise from a loose or worn support
• Supports reliable airflow by preserving correct component spacing

• One right-side end support

• Disconnect power before starting any repair
• Access may require removing panels or components; keep fasteners organized
• Inspect mating surfaces and brush away debris before installing to ensure a secure fit

This end support is a small mounting bracket that secures the freezer/refrigerator end panel and helps keep the cabinet aligned for smooth door operation and proper seal. It replaces a worn or broken support to restore stability and reduce rattling. What it does:

• Supports and anchors the end panel at the left-front corner of the cabinet
• Maintains correct panel alignment to help doors and seals close properly
• Reduces vibration, shifting, or rattling caused by a damaged or missing support
• Fits into mating slots/tabs on the cabinet frame as the OEM bracket does

• One end support (left-front)

• Basic hand tools required; remove power to appliance before service
• Handle parts carefully to avoid scratching painted surfaces
• Inspect adjacent clips, screws and panels and replace any damaged fasteners

Replacement control bracket for electric and gas ranges. Secures and supports the control panel assembly. Order a new bracket if yours is cracked or broken.

Replace your worn, cracked, or unresponsive range control panel touchpad. This overlay installs on the control panel surface to restore button functionality.

Fix random beeping, locked controls, or self-cleaning errors. This control board governs display, timers, and temperature relays. Moderate difficulty.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

If burners won't ignite automatically but light with a match, the spark module likely failed. Accessed from the back of the range, moderate difficulty.

Replace worn or damaged stovetop grates with this cast surface burner grate kit. It restores a level, stable cooking surface on your gas range or cooktop so pots and pans sit securely and heat evenly over the burners.

• Supports cookware at the correct height above the burners
• Provides an even, stable surface for moving pots and pans
• Common fix for cracked, warped, or broken grates
• Helps reduce rocking or instability from worn grates

What's included: One surface burner grate kit (cast), as supplied by the manufacturer. Installation notes:

• Allow the cooktop to cool completely before handling grates.
• Lift off old grates; position the new grates so they align properly and sit fully on the cooktop.
• Handle carefully—cast parts can chip or scratch surfaces if dropped.
• Verify each grate sits flat and stable before use.

Replace worn or damaged stovetop grates with this cast surface burner grate kit. It restores a level, stable cooking surface on your gas range or cooktop so pots and pans sit securely and heat evenly over the burners.

• Supports cookware at the correct height above the burners
• Provides an even, stable surface for moving pots and pans
• Common fix for cracked, warped, or broken grates
• Helps reduce rocking or instability from worn grates

What's included: One surface burner grate kit (cast), as supplied by the manufacturer. Installation notes:

• Allow the cooktop to cool completely before handling grates.
• Lift off old grates; position the new grates so they align properly and sit fully on the cooktop.
• Handle carefully—cast parts can chip or scratch surfaces if dropped.
• Verify each grate sits flat and stable before use.

Replace worn or damaged stovetop grates with this cast surface burner grate kit. It restores a level, stable cooking surface on your gas range or cooktop so pots and pans sit securely and heat evenly over the burners.

• Supports cookware at the correct height above the burners
• Provides an even, stable surface for moving pots and pans
• Common fix for cracked, warped, or broken grates
• Helps reduce rocking or instability from worn grates

What's included: One surface burner grate kit (cast), as supplied by the manufacturer. Installation notes:

• Allow the cooktop to cool completely before handling grates.
• Lift off old grates; position the new grates so they align properly and sit fully on the cooktop.
• Handle carefully—cast parts can chip or scratch surfaces if dropped.
• Verify each grate sits flat and stable before use.

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Cooktop mounting screw secures the cooktop to frame or brackets. Replace if stripped, missing, or rusty to eliminate wobble, rattling, or lifted corners.

Adhesive graphic label for your range's electronic control panel. Replaces worn, faded, or unreadable button markings. Restores a clean console appearance.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.

Symptoms of a bad igniter:

• Burners not lighting
• Igniter sparking erratically

The causes of a bad part can include physical damage or wear and tear over time.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

Burner base holds and secures the gas burner assembly on your cooktop. Replace if cracked, warped, or corroded to restore proper burner seating.

The Vision Burner XL is an OEM part for GE ranges. It is a large burner designed to provide high heat output for tasks that require intense cooking temperatures, such as boiling large pots of water or rapid heating. This burner ensures efficient and powerful cooking performance.

Causes of a bad Vision Burner XL can include wear and tear from frequent use, exposure to high temperatures, or damage due to impact or spills. Electrical issues can also lead to malfunctioning.

Symptoms of a bad Vision Burner XL include:

• The burner not igniting
• Uneven flame or weak flame
• The burner not maintaining a steady flame
• Visible damage or corrosion on the burner

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.

Package of 12

Single fastening screw for range components. Replaces missing, stripped, or damaged screws that secure panels, brackets, and trim pieces in place.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Flat cooking surface that fits over range burners for pancakes, eggs, and sandwiches. Replace if cracked, warped, or missing from previous owners.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.