Parts for Ge PGP989TN2WW: Control Panel & Cooktop Parts

Gray burner grate for gas cooktops. Supports pots and pans over the burner flame. Replace if cracked, warped, chipped, or showing heat damage.

Replacement glass top surface for your cooktop. Installs over the burner assembly. Order when your current glass top is cracked, chipped, or broken.

Fix burners that won't ignite or spark continuously. This spark module controls ignition for all surface burners. DIY repair in about 45 minutes.

Fix a burner that won't light or only clicks by replacing the igniter. This DIY repair takes about 10 minutes with basic tools. Fits GE gas cooktops.

C burner

Replace your cooktop's gray burner cap when damaged, chipped, or discolored to restore proper flame distribution. Confirm fit with your model number.

Burner base installs beneath the burner cap on gas cooktops. Replace if cracked, warped, or dome-shaped to restore proper flame coverage and alignment.

Approx 3 inches in diameter

Directs gas from the manifold to your cooktop burner for proper flow and reliable ignition. Replace when flames are weak or uneven. Confirm fit.

Rubber grommet that seats beneath the burner head on your gas cooktop surface. Replace if cracked, worn, or missing to keep burners level and secure.

Rubber grommet seals the cabinet opening where a gas valve or hose passes through your cooktop. Replace if cracked, torn, or missing to restore seal.

This switch harness connects a cooktop or range infinite (burner) switch to the appliance wiring, restoring reliable power and control to a single heating element. It's a direct-replacement wiring connector used where the switch lead has failed or become damaged. What it does:

• Provides the wiring connection between the infinite/burner control switch and the cooktop power circuit
• Restores proper electrical contact when a burned or frayed switch lead causes intermittent or no heat
• Prevents loose or exposed wiring that can cause arcing or erratic burner behavior
• Used when a burner won't heat or control settings do not respond as expected

• One switch harness

• Disconnect power to the appliance before beginning work to avoid shock risk
• Access typically requires removing the cooktop or back panel; follow your model's service manual for safe access
• Harness normally installs with plug-style connectors—no soldering required; match connector shapes and terminal positions
• If you see heat damage to surrounding wiring or terminals, replace any damaged components and inspect nearby insulation

This tubing routes water inside the refrigerator for the dispenser and ice maker, restoring a sealed path for reliable water flow. It replaces damaged or leaking internal supply tubing to stop drips and restore normal dispensing. What it does

• Carries water between the inlet, dispenser, and ice maker components
• Restores proper water flow when internal lines are cracked, pinched, or clogged
• Stops visible leaks or moisture inside the fresh-food compartment
• Helps prevent water damage and keeps the dispenser/ice maker functioning

• One refrigerator water supply tubing assembly (as shown)

• Shut off the refrigerator water supply and unplug the appliance before beginning
• Use care removing trim/panels to access internal tubing; keep track of clips and fasteners
• Make secure, leak-free connections; replace any damaged clips or fittings
• After installation, restore power and water, then check all connections for leaks

Gas supply tubing connects your cooktop's gas valve to the burner assembly. Replace if tubing is cracked, kinked, damaged, or leaking gas during use.

Gas supply tube that connects the manifold to the burner valves on your gas cooktop. Replace if cracked, damaged, or leaking to restore safe operation.

Burner tubing for gas cooktops. Connects the gas valve to the burner assembly. Replace if tubing is cracked, damaged, or leaking during inspection.

Wire guard for cooktop burner assembly. Protects wiring and components from heat damage. Replace if bent, broken, or missing for proper protection.

Downdraft fan not working? This fan switch activates the ventilation system. Moderately difficult repair—requires lifting cooktop to access mounting plate.

Gas pressure regulator for cooktops and ranges. Installs on the gas supply line to control flow to burners. Replace if cracked, leaking, or missing.

This water inlet valve controls water flow to the refrigerator's ice maker and dispenser, restoring normal ice production and water dispensing when the valve fails. Durable direct-fit replacement for affected GE refrigerators. What it does

• Opens and closes to supply water to the ice maker and dispenser when the dispenser or ice maker calls for water.
• Commonly used to fix no-water or low-water flow to the ice maker or dispenser.
• Stops water flow when the refrigerator is off to prevent leaks or flooding.
• Works with electrically controlled solenoid valves in the water system.

• One water inlet valve

• Disconnect power and shut off the household water supply before starting work.
• Access may require removing interior panels, the back cover, or toe panel depending on the model.
• Replace using the existing mounting and wiring connections; use new water line fittings if old fittings are corroded.

Fix burners that won't ignite or maintain consistent flame. This surface burner valve regulates gas flow to restore reliable control on your cooktop.

Fix a burner that won't light or adjust properly. This gas valve restores smooth flame control from simmer to high. DIY repair in under 40 minutes.

Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.

Power cord for cooktops. Connects your cooktop to the electrical outlet. Replace if your cord is frayed, damaged, or missing to restore power connection.

Rubber foot that attaches to the bottom of cooktop grates. Replace if cracked, worn, missing, or loose to prevent grates from sliding and scratching.

Fix uneven flames or incorrect burner heat output with this cooktop orifice spud assembly. Controls gas flow to individual burners. Moderate DIY repair.

Converting your cooktop from natural gas to liquid propane? This LP gas orifice spud enables proper fuel conversion for specific burner positions.

Left-side ignitor harness for gas cooktops. Connects ignitor to control system. Replace if damaged, frayed, or causing connection issues.

Connects the right-side ignitor to your gas cooktop wiring. Replace if your harness is damaged, cracked, or causing unreliable spark connections.

Splash guard for gas cooktops. Installs around burner area to protect surrounding surfaces. Replace if cracked, broken, or missing for proper protection.

Foam seal tape creates an airtight barrier between your cooktop and countertop, preventing spills from dripping into cabinets. Replace when worn or gaps appear.

Installation kit for cooktops. Includes hardware and components needed to properly mount and secure your cooktop during installation or replacement.