Parts for Frigidaire FPBM307NTFA: Control Panel,Door,Misc. Parts

This control assembly is the appliance's main console electronic control that accepts user inputs and manages functions and display, helping restore proper operation when the original control is faulty. What it does:

• Receives button/knob inputs and sends signals to the appliance's systems
• Controls cycle selection, timing, and readouts on the front console
• Manages power and communicates with other system boards
• Faulty units can cause unresponsive controls, no or erratic display, or incorrect cycle behavior

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the board and connectors carefully; avoid static discharge and bent pins
• Verify wire and connector locations match before reconnecting; do not force plugs

This complete outer door assembly replaces a damaged or worn refrigerator door to restore proper sealing, appearance, and temperature performance. It provides a ready-to-install outer door shell with the necessary exterior components for a like-for-like replacement. What it does:

• Replaces dented, cracked or cosmetically damaged outer door panels to restore appearance
• Restores proper door fit and alignment to help maintain internal temperature and reduce energy loss
• Addresses issues with loose or misaligned doors that make closing difficult or cause cold air leakage
• Works with existing inner liners, gaskets, hinges, and trim

• Recommended for homeowners comfortable with appliance disassembly; basic tools required
• Remove power and empty the door before starting; support the door during removal to avoid injury or damage
• Reuse or transfer existing hinges, gaskets, and inner liners only if undamaged

This complete outer door assembly replaces a damaged or worn refrigerator door to restore proper sealing, appearance, and temperature performance. It provides a ready-to-install outer door shell with the necessary exterior components for a like-for-like replacement. What it does:

• Replaces dented, cracked or cosmetically damaged outer door panels to restore appearance
• Restores proper door fit and alignment to help maintain internal temperature and reduce energy loss
• Addresses issues with loose or misaligned doors that make closing difficult or cause cold air leakage
• Works with existing inner liners, gaskets, hinges, and trim

• Recommended for homeowners comfortable with appliance disassembly; basic tools required
• Remove power and empty the door before starting; support the door during removal to avoid injury or damage
• Reuse or transfer existing hinges, gaskets, and inner liners only if undamaged

This complete outer door assembly replaces a damaged or worn refrigerator door to restore proper sealing, appearance, and temperature performance. It provides a ready-to-install outer door shell with the necessary exterior components for a like-for-like replacement. What it does:

• Replaces dented, cracked or cosmetically damaged outer door panels to restore appearance
• Restores proper door fit and alignment to help maintain internal temperature and reduce energy loss
• Addresses issues with loose or misaligned doors that make closing difficult or cause cold air leakage
• Works with existing inner liners, gaskets, hinges, and trim

• Recommended for homeowners comfortable with appliance disassembly; basic tools required
• Remove power and empty the door before starting; support the door during removal to avoid injury or damage
• Reuse or transfer existing hinges, gaskets, and inner liners only if undamaged

The Door Trim is an OEM part for Frigidaire microwaves. As an accent piece affixed to the outer door frame, it contributes to the overall appearance and aesthetic of the appliance.

Causes of a damaged door trim can include wear from extended opening and closing loosening adhesive bonds, impact damage detaching perimeter pieces, or discoloration/ cracks affecting its visual appearance over time.

Symptoms of a faulty door trim involve: 

• Gaps or separation from the door frame
• Loose, flaking, or discolored trim sections  
• Protruding edges present risk of cuts or snags

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

The Door Latch is an OEM part for Frigidaire microwaves. It is a component that secures the microwave door closed during cooking functions and prevents it from accidentally opening. The latch is designed with a sturdy spring-loaded mechanism to provide a secure seal around the door opening.

Causes of a bad latch can include wear and tear over time, damage from repeated use, or failure of the latch spring or locking mechanism.

Symptoms of a bad microwave door latch include:

• The door not closing or latching securely
• Difficulty or inability to lock the door closed
• The door popping or swinging open during a cooking cycle
• Reduced power or inability to operate cooking functions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This complete outer door assembly replaces a damaged or worn refrigerator door to restore proper sealing, appearance, and temperature performance. It provides a ready-to-install outer door shell with the necessary exterior components for a like-for-like replacement. What it does:

• Replaces dented, cracked or cosmetically damaged outer door panels to restore appearance
• Restores proper door fit and alignment to help maintain internal temperature and reduce energy loss
• Addresses issues with loose or misaligned doors that make closing difficult or cause cold air leakage
• Works with existing inner liners, gaskets, hinges, and trim

• Recommended for homeowners comfortable with appliance disassembly; basic tools required
• Remove power and empty the door before starting; support the door during removal to avoid injury or damage
• Reuse or transfer existing hinges, gaskets, and inner liners only if undamaged

The Handle is an OEM part for Frigidaire microwaves. It provides the means for opening and closing the microwave door. The handle plays an important role in accessing the cooking cavity in a safe and convenient manner.

Causes of a bad handle can include damage or cracks from excessive opening and closing of the microwave door over time. 

Symptoms of a bad handle include:

• Looseness or unable to firmly grasp the handle  
• Cracks or breaks that compromise grip ability
• Difficulty or inability to fully open or close the door

Overuse and mishandling can cause the plastic to weaken or crack. Replace yours today with this genuine OEM Frigidaire replacement to restore complete functionality and usability to your microwave.  

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
 

This PC Board is an OEM part for Frigidaire microwaves. It is a critical electronic component that regulates and controls various functions of the microwave, such as the power settings, timer, and cooking modes.

The malfunctioning of a microwave's PC board can be attributed to electrical surges, normal wear and tear, exposure to moisture, or electrical faults within the microwave. These issues can lead to a decrease in the microwave's efficiency and functionality.

Symptoms of a failing PC board  include:

• Inconsistent cooking or heating performance.
• The microwave fails to start or abruptly stops during operation.
• The control panel is unresponsive or displaying error codes.
• Difficulty in adjusting the microwave settings.
• The microwave exhibits unusual behavior, such as starting without input.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.