Parts for Frigidaire FPBM307NTFA: Oven,Cabinet Parts

The Wave Guide Cover is an OEM part for Frigidaire microwaves. The cover prevents food particles and moisture from entering the wave guide, helping to maintain the efficiency and safety of the microwave.

Causes of a bad wave guide cover can include exposure to high heat, splatters from food and liquids, or regular wear and tear. 

Symptoms of a bad wave guide cover include:

• Sparks or arcing inside the microwave
• Uneven cooking or heating
• Visible burns, cracks, or discoloration on the cover
• Noise or rattling sounds during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Shelf Support is an OEM part for Frigidaire countertop microwaves. It holds and stabilizes shelving inside the microwave cavity during operation. 

Symptoms of a faulty shelf support include:

• Loose or detached shelves that cannot maintain placement  
• Difficulty positioning shelves at desired height levels
• Scrapes or dents on interior microwave walls from shelf movement
• Gaps or spaces where shelf legs do not sit securely  

Causes relate to typical wear of spring clips or brackets holding shelves in place. Regular vibration from microwave turntables can weaken pressure points over time.

This OEM replacement shelf is compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Shelf Support is an OEM part for Frigidaire countertop microwaves. It holds and stabilizes shelving inside the microwave cavity during operation. 

Symptoms of a faulty shelf support include:

• Loose or detached shelves that cannot maintain placement  
• Difficulty positioning shelves at desired height levels
• Scrapes or dents on interior microwave walls from shelf movement
• Gaps or spaces where shelf legs do not sit securely  

Causes relate to typical wear of spring clips or brackets holding shelves in place. Regular vibration from microwave turntables can weaken pressure points over time.

This OEM replacement shelf is compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This control assembly is the appliance's main console electronic control that accepts user inputs and manages functions and display, helping restore proper operation when the original control is faulty. What it does:

• Receives button/knob inputs and sends signals to the appliance's systems
• Controls cycle selection, timing, and readouts on the front console
• Manages power and communicates with other system boards
• Faulty units can cause unresponsive controls, no or erratic display, or incorrect cycle behavior

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the board and connectors carefully; avoid static discharge and bent pins
• Verify wire and connector locations match before reconnecting; do not force plugs

This complete outer door assembly replaces a damaged or worn refrigerator door to restore proper sealing, appearance, and temperature performance. It provides a ready-to-install outer door shell with the necessary exterior components for a like-for-like replacement. What it does:

• Replaces dented, cracked or cosmetically damaged outer door panels to restore appearance
• Restores proper door fit and alignment to help maintain internal temperature and reduce energy loss
• Addresses issues with loose or misaligned doors that make closing difficult or cause cold air leakage
• Works with existing inner liners, gaskets, hinges, and trim

• Recommended for homeowners comfortable with appliance disassembly; basic tools required
• Remove power and empty the door before starting; support the door during removal to avoid injury or damage
• Reuse or transfer existing hinges, gaskets, and inner liners only if undamaged

This magnetron generates the microwave energy used to heat food in countertop and over-the-range microwaves. Replace a failed magnetron when the oven powers on but does not heat or shows arcing or loud humming. What it does:

• Converts high-voltage power into microwave radiation that heats food.
• Common symptom: microwave runs but does not heat.
• Other symptoms: unusually loud humming, arcing or sparking inside the cavity, or a burning/ozone-like smell.
• Not a user-serviceable electrical component — faults often require component-level replacement.

• Disconnect power before servicing; unplug the appliance and verify power is removed.
• Discharge the high-voltage capacitor before touching high-voltage components to avoid serious shock.
• Handle carefully; avoid touching the magnetron antenna or ceramic surfaces.

The Capacitor is an OEM part for Frigidaire microwaves. It is responsible for storing and releasing electrical energy to power the microwave's magnetron, which generates the high-frequency waves needed for cooking.

A bad capacitor can be caused by electrical issues, component failure, or physical damage. Signs of a faulty capacitor include microwave not heating properly, sparking or arcing inside the microwave, or unusual noises during operation.

Symptoms of a bad capacitor include:

• Microwave not heating  
• Sparking or arcing 
• Buzzing or humming sounds

Replace your malfunctioning or damaged capacitor with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Replacement electrical diode for Frigidaire refrigerators that directs current flow to protect control circuitry and help defrost and compressor systems operate correctly. Installs quickly to restore proper electrical function when a diode fails. What it does:

• Allows electrical current to flow in only one direction to protect sensitive control and compressor circuits.
• Prevents backfeed that can damage control boards or other components.
• Common symptom: intermittent or no compressor/defrost operation.
• Other symptoms: blown fuses, tripped breakers, or erratic electrical behavior in the appliance.

• Disconnect power to the appliance before beginning any service.
• Handle electrical connections carefully; use insulated tools and avoid touching live terminals.
• Confirm connector fit and orientation before finalizing installation.

This mesh grease filter captures grease and food particles from exhaust air in your over-the-range ventilation system, helping protect the blower and keep the area around your cooktop cleaner. Replace a bent or saturated filter to restore proper airflow. What it does:

• Traps grease and particulates from cooking exhaust
• Helps maintain airflow through the venting system
• Common signs of replacement: torn/warped mesh, broken tabs, heavy grease saturation, or the filter falling out

• 1 mesh grease filter

• Disconnect power before servicing and let surfaces cool
• Wear gloves; filter edges can be sharp
• Access the filter from the bottom, release the latch or tabs, slide out the old filter, and seat the new one securely in the same orientation
• Do not operate the appliance without the grease filter installed

This Fuse is an OEM part for Frigidaire microwaves. It's a critical safety component designed to protect the microwave from electrical overload by breaking the circuit if the current is too high. This fuse is specifically tailored to fit and function properly with Frigidaire microwave models, ensuring safety and reliability.

Fuses in microwaves can blow due to power surges, electrical faults within the appliance, or overheating caused by restricted airflow or malfunctioning components. A blown fuse prevents the microwave from operating as a safeguard against potential electrical damage or fire hazards.

Symptoms of a blown fuse include:

• The microwave suddenly stops working and doesn't turn on.
• No response from the microwave's control panel or display.
• The microwave is completely unresponsive, even when the door is opened or closed.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This replacement power cord restores the appliance's connection to household power so it can operate safely and reliably. It replaces a worn, damaged or missing cord to help eliminate power interruptions and visible cord damage. What it does

• Provides the electrical connection between the appliance and the wall outlet.
• Restores power when the original cord is frayed, cut, melted or otherwise damaged.
• Helps stop intermittent power or no-power conditions caused by a faulty cord or plug.
• Maintains safe insulation and strain-relief at the appliance entry point when installed correctly.

• Disconnect the appliance from power before inspecting or replacing the cord.
• Route the cord using the appliance's built-in strain relief or cord retainer to prevent pinching.
• Replace damaged strain reliefs or terminal covers; secure all connections firmly.

This temperature sensor monitors internal fridge/freezer temperature so the control board can regulate cooling and defrost cycles for more consistent temperatures and food safety. What it does

• Measures compartment temperature and sends readings to the control board.
• Helps the refrigerator maintain set temperatures by enabling accurate cooling cycles.
• Supports proper defrost control when used in defrost/evaporator applications.
• A failing sensor can produce temperature fluctuation, poor cooling, or longer run times.

• One temperature sensor

• Disconnect power before servicing to avoid shock or compressor damage.
• Handle the sensor and connector gently; avoid pulling on wires.
• Verify location and routing match the original; secure sensor to prevent contact with moving parts.

This mechanical thermostat controls refrigerator temperature by sensing evaporator or cabinet temperature and switching the compressor and fans on and off. Replaces a worn or faulty control to help restore consistent cooling and temperature regulation. What it does

• Senses temperature and closes/open circuit to run the compressor and cooling fans
• Helps maintain set temperature by cycling refrigeration system components
• Commonly linked to symptoms like warm or fluctuating temperatures, compressor not running, or continuous running
• Works as the control point for user temperature settings

• One thermostat

• Disconnect power to the appliance before accessing controls to avoid shock or injury
• Access may require removing interior panels or control housing
• Handle sensing bulb and capillary tube carefully to avoid kinks or damage

The Thermostat is an OEM part for Frigidaire microwaves. The thermostat accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

The Thermostat is an OEM part for Frigidaire microwaves. Situated near the top of the microwave cavity, it accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

This evaporator fan assembly circulates cold air through the freezer and refrigerator compartments to help maintain even temperatures and proper cooling. Replaces a worn or failed fan to restore airflow. What it does:

• Spins to move cold air across the evaporator coil and into the appliance interior
• Commonly linked to symptoms like unusual noise, weak cooling, or no airflow in compartments
• Helps prevent frost build-up by maintaining steady airflow over the coil
• Works with the appliance's evaporator motor circuit and fan housing

• One evaporator fan assembly

• Disconnect power to the appliance before beginning any work
• Access may require removing interior panels or the evaporator cover; follow your model's service instructions
• Handle the fan blades and motor carefully to avoid damage; avoid contact with sharp sheet metal and edges
• Test the fan operation after reassembly and restore all panels and fasteners

The Latch Hook is an OEM replacement part for Frigidaire microwaves. It is an internal component that helps securely latch and lock the microwave door during operation. The latch hook works with the door handle mechanism to ensure the door is properly fastened to prevent leaks of microwave energy and for safety. 

Causes of a bad latch hook can include wear and tear over time, damage from repeated use of the door latch, or issues with the latch hook spring or connecting components. 

Symptoms of a bad latch hook include:

• The microwave door not closing or latching securely  
• Difficulty closing or popping open the door during a cycle
• Leaks of microwave energy from around the door seals
• Error codes related to door-latching problems

This OEM Frigidaire replacement part is also compatible with Electrolux, Westinghouse, and Kelvinator microwaves. 

This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.

• Transfers motion from the door-open button to the latch hooks to release the door
• Helps resolve a door that won't open when the button is pressed
• Addresses a button that feels loose, sticks, or lacks resistance
• Replaces a cracked or broken lever causing intermittent door operation

• Unplug the microwave and discharge the high-voltage capacitor before servicing
• Remove the grille and control panel to access the interlock/latch area
• Note spring and pivot orientation and transfer any reusable hardware
• Test door release action before completing reassembly

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

• The microwave failing to operate or function properly with the door closed  
• Inability to start or pause operation when the door is opened
• Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

The Door Switch is an OEM part for Frigidaire microwaves, designed to ensure the appliance operates safely by signaling when the door is securely closed. This switch is critical for preventing the microwave from running if the door is open, a key safety feature that protects users from exposure to microwave radiation.

Causes of a bad Door Switch can include mechanical failure due to normal wear and tear from repeated opening and closing of the microwave door. 

Symptoms of a bad Door Switch include:

• The microwave not starting or heating when the door is closed.
• The appliance continuing to operate when the door is opened.
• Intermittent operation or sudden stopping during use.
• Displaying error messages related to the door or switches.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement frame restores the outer trim around the appliance door to its original fit and appearance, helping keep door components aligned and protecting internal parts from damage. What it does

• Replaces a cracked, warped, or visibly damaged door trim piece
• Secures door glass and inner components in place for proper operation
• Restores a finished look to the appliance front after impact or wear
• Helps prevent drafts and debris from entering around the door edge

• Disconnect power to the appliance before starting any repair
• Remove the door or necessary panels per the service manual to access mounting screws
• Keep track of screws and clips; work on a soft surface to avoid scratching

This genuine replacement refrigerator water filter cartridge improves drinking water quality by reducing taste- and odor-causing particles and other common impurities for clearer, better-tasting water straight from the dispenser. What it does

• Filters sediment and chlorine taste/odor to improve water flavor
• Helps reduce common particulate contaminants found in tap water
• Can restore normal water appearance and taste when an old filter is causing cloudiness or off-flavors
• Replaces a worn or clogged cartridge that may cause reduced dispenser flow

• Follow your refrigerator manufacturer's instructions for removal and insertion—no tools usually required
• Flush several cups of water after installation to clear air and initial carbon fines
• Dispose of used cartridge according to local regulations

The Mounting Kit is an OEM part for Frigidaire microwaves. It provides the necessary hardware to mount a built-in microwave securely above a cooktop or range. The mounting kit contains mounting brackets, and screws to facilitate a safe and sturdy installation. This kit does not include the installation instructions.

Causes of a bad mounting kit can include deterioration of mounting brackets or screws over time and repeated use, or if the original kit was missing components needed for a secure installation.

Symptoms of a bad or missing mounting kit include:

• The microwave become loose or detached from the wall
• Screws fall out or strips during installation
• Brackets bend or break over time
• Microwave is not level after installation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This Filter is an OEM part for Frigidaire microwaves. It captures grease and other particles from the air during cooking, helping to prevent buildup inside the microwave and in the kitchen's ventilation system.

Over time, filters can become clogged with grease and debris, leading to reduced effectiveness and potential issues with the microwave's performance. Common causes for a filter's deterioration include regular use, especially with high-grease foods, and lack of regular cleaning or maintenance.

Symptoms of a bad filter include:

• Noticeable grease buildup on the filter.
• Reduced effectiveness in venting smoke or odors.
• The microwave becomes louder during operation.
• Decreased efficiency in cooking, particularly with foods that produce a lot of steam or smoke.
• An unpleasant odor emanating from the microwave during or after use.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This replacement motor restores power to the appliance's fan or blower assembly so airflow and cooling performance resume. Use it to replace a failed or noisy motor and get your appliance running normally again. What it does

• Spins the fan/blower or driven component to circulate air or operate the mechanism.
• Replaces motors that stall, hum, or do not run at all.
• Can resolve reduced airflow, warm compartments, or uneven cooling when motor failure is the cause.
• Designed to match the appliance's original motor function and mounting.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Verify the motor part number and physical fit against the unit before installation.
• Basic hand tools required; access may require removing panels or shelves.

This replacement dryer motor turns the drum and drives the blower so your dryer tumbles and vents properly. Restores drum rotation and airflow for normal drying performance. What it does:

• Spins the dryer drum so clothes tumble during the drying cycle
• Powers the blower to move air through the drum and vent system
• Helps resolve symptoms like a drum that won't turn, no tumbling, or reduced airflow
• Replaces worn or failed motor assemblies to restore normal operation

• One replacement dryer motor

• Disconnect power before starting any repairs to avoid shock or injury
• Basic mechanical skills and common hand tools are typically required
• Keep work area clear of lint and debris; inspect belt and idler for wear when replacing the motor

The Coupler is an OEM part for Frigidaire microwaves. It connects the microwave glass tray to the rotating turntable shaft inside the microwave. The coupler allows for the stable and secure rotation of the glass tray when in use, ensuring even cooking and heating.

Causes of a bad coupler can include wear and tear over time if utilized excessively, as well as damage due to impact or stress placed on the coupler during mishandling or cleaning of the tray.

Symptoms of a bad coupler include:

• The glass tray not spinning or rotating properly during cooking
• Excessive shaking or vibration of the tray
• Detachment or separation of the tray from the turntable shaft
• Leakage or drips occurring near the tray connection point

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This Support Ring is an OEM part for Frigidaire microwaves. This support ring is an integral component that sits beneath the microwave's turntable, providing stable and balanced support. It ensures the smooth rotation of the turntable, which is essential for even cooking and heating food. 

The support ring can become worn or damaged due to regular use, leading to issues with the turntable's rotation. Common causes of deterioration include mechanical stress, uneven weight distribution from dishes, or accidental damage.

Symptoms of a faulty support ring include:

• Unsteady or wobbly turntable movement.
• The turntable struggling to rotate or not rotating at all.
• Noises such as scraping or clicking when the microwave is in operation.
• Uneven cooking or heating of food, indicating a disruption in turntable motion.
• Visible cracks, breaks, or warping of the support ring.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Glass Turntable Plate is an OEM part for Frigidaire microwaves. As the surface food rests upon during cooking, it features heat-resistant tempered glass construction suitable for high-power microwave usage. 

Causes of damage can include cracking or splitting from thermal shock of sudden temperature changes during repeated heating and cooling cycles. Improper cleaning methods using harsh chemicals may also degrade protective coatings.

Symptoms of a faulty glass plate involve: 

• Cracks or chips exposing sharp edges presenting a hazard
• Denting or warping preventing level rotation inside the cavity
• Staining or clouding compromising visibility of cooking foods

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

This replacement shaft transmits rotation between components within the targeted assembly. It restores proper alignment and smooth motion when the original shaft is worn, bent, or stripped, helping the appliance operate reliably again.

• Transfers rotational force between mating components in the mechanism
• Maintains alignment and support for rotating parts
• Ensures secure engagement with the hub/gear to prevent slipping
• Worn or bent shafts can cause wobbling, grinding noises, slipping, or intermittent operation

• Disconnect power (and water supply if applicable) before servicing
• Access the assembly and note the shaft's orientation and any spacers, clips, or washers
• Transfer any reusable hardware from the old shaft and seat the new shaft fully
• Verify smooth rotation by hand before reassembly and testing

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft

The Damper is an OEM part for Frigidaire microwaves. This part regulates airflow within the microwave, ensuring that steam and odors are properly vented out during cooking.

Causes of a bad damper can include wear and tear over time, buildup of grease and debris, or damage from high temperatures.  

Symptoms of a bad Damper include:

• Poor ventilation during cooking, leading to lingering odors and steam
• The microwave overheating or not ventilating properly
• Unusual noises coming from the damper area
• The damper not opening or closing as it should

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Vent Grill is an OEM part for Frigidaire microwaves. It is a component located on the top or bottom of microwaves that allows heat, smoke, and odors to safely vent outside. Effective ventilation is important for removing steam and fumes produced during the microwave cooking process.

Causes of a bad Vent Grill can include damage or blockages to the vent holes over time due to food splatters/particles or debris buildup, as well as cracks or breaks in the plastic components. 

Symptoms of a bad Vent Grill are:

• Steam or smoke escaping from areas besides the dedicated vent 
• Reduced airflow and inability to fully vent heat/fumes
• Fogging or condensation inside the microwave cavity
• Unpleasant cooking odors lingering around the appliance

This OEM Frigidaire replacement part is compatible with microwaves from Electrolux, Gibson, Kelvinator, select Kenmore and Westinghouse models.
 

The Vent Damper is an OEM part for Frigidaire microwaves. It is designed to control the flow of air through the microwave’s ventilation system, ensuring proper ventilation during operation. This component helps to prevent the backflow of air, keeping the microwave's interior and its surroundings free from unwanted odors and heat.

Causes of a bad vent damper can include wear and tear over time, accumulation of grease or debris, or damage from external impact. 

Symptoms of a bad vent damper include:

• Poor ventilation
• Unusual odors lingering around the microwave
• Excessive heat buildup
• Increased noise during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This fan blade circulates cold air across the evaporator to help maintain even refrigerator/freezer temperatures and efficient cooling. Replacing a damaged or warped blade restores proper airflow and reduces unusual noise. What it does:

• Moves air across the evaporator coil so the appliance can cool evenly
• Helps prevent hot spots and frost buildup caused by poor airflow
• Can cause loud noise, reduced cooling, or a warm compartment when worn or broken
• Works with the evaporator/fan motor assembly to keep temperatures stable

• One fan blade

• Disconnect power before accessing evaporator compartment or fan assembly
• Handle blade carefully to avoid bending the fins; a bent blade causes vibration and noise
• May require removing evaporator cover or fan shroud; keep track of any screws or clips
• If motor is noisy or blade clearance is tight, inspect/replace motor or mounting hardware as needed

This replacement rubber cushion cushions contact points to reduce noise, dampen vibration and help protect cabinet or door surfaces from wear. It restores the soft stop and reduces rattling where rubber bumpers are used. What it does:

• Absorbs impact and prevents hard metal-on-metal contact
• Reduces squeaks and rattling from doors, drawers, or panels
• Helps keep aligned parts from chipping or scuffing adjacent surfaces
• Durable rubber design resists compression and repeated use

• Disconnect power or unplug the appliance before servicing when applicable
• Typically installs by pressing into a hole or over a stud; no special tools required for most applications
• Inspect mounting area for debris or damage before installing

This mounting nut kit secures a threaded connection or component inside your appliance, keeping it tight and stable during operation. Replacing a worn or stripped nut restores a solid hold and helps prevent leaks, rattling, and poor performance. What it does:

• Fastens a component or fitting to its mating surface, maintaining proper alignment
• Restores grip when original threads are stripped, cracked, or worn
• Helps prevent vibration-related loosening during cycles
• Can resolve symptoms such as a loose/wobbly assembly, rattling noises, seepage at the joint, or visible thread damage

• One mounting nut kit

• Disconnect power; shut off water supply if the joint carries water
• Support the mating component while installing to avoid strain on plastic parts
• Start threads by hand to prevent cross-threading; tighten only until snug—do not overtighten
• Inspect any related gasket/O-ring and replace if worn or damaged

This outer housing cover protects internal components and gives the appliance a finished appearance. It replaces a cracked, broken, or missing exterior cover so controls and wiring stay shielded from damage and debris. What it does:

• Shields internal parts from accidental contact, dust, and spills
• Restores the appliance's original exterior look and fit
• Helps prevent shorting or damage caused by exposed components
• Common symptom: cracked, warped, or missing cover leaving internals exposed

• One outer housing cover

• Disconnect power before starting any repair to avoid shock or injury
• Handle the cover carefully to avoid cosmetic scratches during installation
• Use the proper fasteners and alignment; do not force or bend the part

The Mounting Bracket is an OEM part for Frigidaire microwaves. This part securely attaches the microwave to the wall or cabinetry. This bracket is designed to ensure that your microwave is mounted safely and remains stable during operation, preventing any potential movement that could lead to damage or operational issues. 

Causes of a bad Mounting Bracket can include physical damage from improper installation or accidents, wear and tear over time that weakens the bracket's integrity, and corrosion due to exposure to moisture or kitchen vapors, which can compromise its strength and stability.

Symptoms of a bad Mounting Bracket include:

• The microwave tilting or sagging
• Unusual vibrations or noise during operation, indicating that the microwave is not securely fastened
• Visible damage or rust on the bracket itself, which could weaken its support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement pin is a small metal mounting shaft used to secure moving or stationary appliance components, restoring proper alignment and function. It's a simple, direct-fit replacement when a worn or broken pin prevents normal operation. What it does:

• Acts as a pivot or fastener to hold panels, levers, or hinges in place
• Restores correct alignment and prevents wobble or misrouting of parts
• Commonly replaced when pin is bent, worn, or sheared
• Helps re-establish smooth movement of the connected component

• Basic hand tools may be required; access panels or trim may need removal
• Inspect mating parts (bushings, clips, brackets) and replace if worn
• Disconnect power before servicing appliances with electrical components

This replacement electrical wire harness routes power between components so your appliance can run reliably. It restores connectivity for circuits affected by damaged or worn wiring. What it does

• Carries electrical current between internal components to restore power and signal continuity.
• Replaces frayed, cut, or burnt wiring that can cause intermittent operation or component failure.
• Helps eliminate arcing, visible burn marks, or loose-disconnect issues at terminals.
• Matches original connector types and color-coded leads for a straightforward swap.

• Always disconnect power before starting any repair to avoid shock or injury.
• Verify connector orientation and wire colors match the original before finalizing connections.
• Route and secure the harness away from moving parts and hot surfaces to prevent wear.