Parts for Frigidaire GLMV169FPBC: 05 - Control Panel / Door Parts

Microwave touch pad with control panel and ribbon cable. Replaces cracked, worn, or unresponsive touch panels. Includes membrane switch assembly.

The control panel bracket is the structural mounting frame that holds the control panel securely in place on your appliance. It keeps the panel at the correct position and angle so all connections and fasteners align properly. Replace this bracket if the control panel feels loose, wobbles, or has shifted out of position due to a cracked or broken mounting frame.

Mounting screw for microwave panels, trim, and brackets. Replaces lost or damaged fasteners to restore secure alignment and eliminate rattles or loose components.

A complete refrigerator door assembly that replaces a damaged, dented, or non-sealing door to restore proper closure and appearance. Replaces the full door panel so you don't have to patch or tape the existing door. What it does

• Provides the full outer door structure to restore correct sealing and insulation performance.
• Replaces doors that are dented, cracked, warped, or that no longer latch properly.
• Helps stop cold air loss and reduce frost buildup when the door seals and aligns correctly.
• Restores the appliance's finished exterior look when the original door is cosmetically damaged.

• One complete refrigerator door assembly as shown.

• Disconnect power and remove contents from the door before starting. Have a second person available—door assemblies are heavy and awkward.
• Use proper tools and follow the manufacturer's hinge and alignment procedure; hinges and gaskets may be reused if undamaged.
• Inspect and, if needed, replace the door gasket and hinge hardware for best sealing and fit.

This complete door assembly replaces a damaged or bent oven/microwave door so the appliance closes securely and looks like new. Restores proper sealing, safety, and operation for reliable cooking and protection. What it does:

• Replaces the appliance door to restore proper closing and heat containment
• Re-establishes a secure seal to help maintain internal temperature
• Improves safety by replacing cracked, dented, or warped door components
• Restores finished appearance for a clean, like-new look

• Disconnect power to the appliance before beginning any repair
• Handle glass and trim carefully; support the door during removal and installation
• Retain and re-use any hinge screws or brackets unless replacements are specified

Replacement glass panel for microwave door. Installs in door frame assembly. Order if your current glass is cracked, broken, sagging, or missing.

Microwave won't start or light stays on when door closes? A faulty door latch prevents proper switch engagement. DIY repair typically takes 15-20 minutes.

Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.

This complete door assembly replaces a damaged or bent oven/microwave door so the appliance closes securely and looks like new. Restores proper sealing, safety, and operation for reliable cooking and protection. What it does:

• Replaces the appliance door to restore proper closing and heat containment
• Re-establishes a secure seal to help maintain internal temperature
• Improves safety by replacing cracked, dented, or warped door components
• Restores finished appearance for a clean, like-new look

• Disconnect power to the appliance before beginning any repair
• Handle glass and trim carefully; support the door during removal and installation
• Retain and re-use any hinge screws or brackets unless replacements are specified

A protective cover that helps contain microwave radiation around the door seal area for safety. Located inside the microwave door frame along the edges. Replace if you notice visible damage, warping, or gaps that could allow microwave leakage during operation.

Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.

Installation hardware kit for mounting your microwave. Includes screws, brackets, and fasteners needed to secure unit. Replaces missing or damaged parts.

A replacement unified-thread screw used to secure appliance panels and internal components. Provides a direct fastener to restore secure attachment when original screws are missing, damaged, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and other appliance components that use a unified-thread screw.
• Restores secure mounting to reduce rattling, movement, or misalignment of parts.
• Replaces stripped, rusted, or missing screws to help maintain safe operation.
• Works where the appliance's service manual or parts diagram specifies a unified-thread fastening point.

• Disconnect power and water before servicing for safety.
• Use the correct screwdriver or bit to avoid stripping the head; install by hand until started, then snug—do not overtighten.
• Replace like-for-like: match thread type and length to the removed screw to ensure proper fit and function.
• If other fasteners show corrosion or damage, inspect nearby hardware and replace as needed.

This is a replacement screw used to secure appliance components and panels so assemblies stay stable and aligned. It provides a straightforward fix when a mounting fastener is missing, stripped, or damaged. What it does

• Secures panels, brackets, or trim to prevent movement and vibration
• Stops rattling or loose parts caused by missing or damaged screws
• Restores proper fit and alignment of the affected assembly
• Works wherever the OEM-designated screw of this size and thread is required

• Turn power off or unplug the appliance before working on electrical areas
• Use the proper-size driver to avoid stripping the head
• Start threads by hand, then tighten until snug — do not overtighten
• If the original screw is corroded or the hole is damaged, inspect mating parts for repair before installing

Microwave mounting screw used to secure internal components or attach the unit to cabinets. Replace if screw is stripped, missing, or broken.

Replacement washer for your microwave. Installs between components to provide spacing or cushioning. Order a new one if the original is missing, worn, or damaged.