Parts for Jenn-Air JDB8700AWP0: 02 - Control Panel And Latch Parts

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

This dishwasher touchpad and control assembly make up the main control center for a dishwasher. The touchpad contains all the functional buttons of the appliance, and the control assembly houses the control board. This component comes as one unit, and the control board is installed directly behind the touchpad in the control panel assembly portion of the part. A faulty touchpad will become unresponsive to the user's commands. The buttons will no longer control the function of the appliance when the touchpad malfunctions, regardless of whether the control board is functional or not. Unplug the dishwasher from all power and water sources. Slide the appliance out from the wall or counter. Locate the screws on the outer perimeter of the dishwasher. These screws remove the main faceplate and trim. Open the dishwasher door and remove the screws directly behind the touchpad and control panel assembly. There are fastening clips that hold the old control assembly in place. Push these clips in, and the old control panel assembly will come off. Unhook the wire harness, and repeat these steps in reverse to install the new component.This Whirlpool dishwasher touchpad and control panel assembly is a genuine OEM product sourced directly from Whirlpool. The touchpad assembly is only available individually and is not included with any other parts. This product is compatible with Whirlpool and Maytag appliances.

This small retaining clip secures trim and appliance components to keep panels and assemblies in place, helping prevent rattling and loose parts during use. It's a simple replacement that restores proper fit and alignment. What it does:

• Holds panels, trim, or small assemblies in place to maintain a secure fit
• Prevents rattling, vibration noise, and movement of loose parts
• Replaces broken, bent, or missing clips that allow gaps or misalignment
• Works where a small fastener is needed to secure plastic or metal components

• Disconnect power or unplug the appliance before servicing to avoid shock or injury
• Inspect the mounting area for damage; replace any broken mating tabs or screws for a secure fit
• Installation typically requires basic hand tools such as pliers or a screwdriver; apply steady pressure to snap clip into place

This jumper wire connects the control board to the user interface, restoring the electrical path the console needs to respond. It's a small replacement part that helps resolve intermittent or lost control-panel communication. What it does:

• Bridges signals between the control board and the front control/display assembly
• Restores electrical continuity when a broken or damaged jumper causes intermittent or no response
• Can stop symptoms such as an unresponsive control panel, blank display, or inconsistent button behavior
• Works as a direct wiring replacement—no repair to the control board required if the jumper is the only fault

• One jumper wire

• Always disconnect power to the appliance before starting any repair
• Handle connectors gently; avoid bending or stressing terminals during installation
• Route the wire away from sharp edges, heating elements, and moving parts
• After installing, verify proper operation of the control panel before reassembling panels

This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.

• Provides threaded fastening for panels, brackets, covers, or internal components
• Replaces worn, rusted, stripped, or missing hardware
• Helps reduce vibration and rattling from loose parts
• Restores proper alignment and a secure fit of attached parts

• Disconnect power; turn off water supply before service
• Note original screw location and retain any spacers or clips for reassembly
• Start threads by hand to avoid cross-threading
• Tighten snugly; do not overtighten to prevent stripping

The Door Latch Assembly is an OEM part for Whirlpool dishwashers. It ensures a secure latch and seal for the dishwasher door during operation.

Causes of a bad dishwasher door latch assembly can include worn-out or broken latch components, damaged or malfunctioning door switches, or misalignment of the latch mechanism.

Symptoms of a bad Dishwasher Door Latch Assembly include:

• Difficulty in closing or latching the dishwasher door
• The dishwasher not starting or running when the door is closed
• Leaks or water spills around the door area
• Inconsistent or intermittent operation of the dishwasher

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This brace connector secures a support brace inside the appliance to help keep internal panels and assemblies aligned and stable. Replacing a worn or damaged connector restores proper support and reduces noise and movement. What it does:

• Fastens and stabilizes an internal support brace or frame
• Prevents panel or assembly movement that can cause vibration or rattling
• Helps maintain proper alignment of connected components
• Replaces broken or corroded connector hardware to restore secure mounting

• One brace connector

• Disconnect power (and gas, if applicable) before starting any repair
• Access may require removing outer or control panels; save existing fasteners for reuse
• Use basic hand tools; avoid overtightening to prevent cracking plastic or bending metal
• Inspect and replace as needed

A front status/indicator light that restores visible feedback from the appliance control panel. Replaces a burned-out or non-functioning front indicator so you can see operating or status changes at a glance. What it does:

• Provides a visible indicator on the front control panel — use when the light no longer illuminates.
• Signals operational changes and status conditions — fixes dim, flickering, or intermittently working indicator lights.
• Restores clear front-panel feedback for normal user checks — helpful when the display no longer shows expected status.

• Disconnect power before starting any repair to avoid shock or damage.
• Access may require removing the control console or front bezel; keep screws and small parts organized.
• Handle the light and lens carefully to avoid damage; use appropriate tools.

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces