Parts for Electrolux EFLS627UIW2: Control Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This board assembly is the appliance's electronic control module that manages core functions and sequence operations, helping restore proper control when the original board fails. Replaces a faulty control board to get your appliance responding and running again. What it does:

• Manages electronic control signals for timed and automatic functions
• Communicates with sensors and user controls to coordinate operation
• Can stop or prevent normal operation if the board is damaged or shorted
• Common symptom linkage: unresponsive controls, erratic cycles, or failure to start

• Disconnect power before servicing to avoid electric shock
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connector orientation and secure all wiring; do not force connectors

A replacement mounting bracket that secures appliance components to the cabinet or chassis, restoring stable support and alignment for panels, assemblies, or controls. What it does

• Provides a durable mounting point to hold panels, assemblies, or components in place.
• Stops loose or sagging panels and reduces rattling or vibration noises.
• Restores proper alignment so doors, panels, or control assemblies fit and operate correctly.
• Replaces damaged, bent, or broken brackets that no longer secure parts.

• One mounting bracket

• Disconnect power (and water, if applicable) before installing to avoid shock or injury.
• Installation typically requires basic hand tools (screwdriver, nut driver); keep hardware and orientation noted for reassembly.
• Do not over-tighten fasteners; align bracket and component before final torque.
• If the bracket mounts to structural studs or inserts, replace any stripped hardware.

The Knob Assembly is an OEM part for Frigidaire washers. It consists of both the control board and knob for the user interface. 

A bad board and knob assembly can be caused by electrical issues, component failure, or physical damage. When the assembly becomes faulty, it can result in issues such as the washer not starting, improper cycle selection, or unresponsive controls.

Symptoms of a bad board and knob assembly include:

• Washer not turning on or responding to controls
• Inability to select or change wash cycles
• Error codes on the control panel

Replace your faulty board and knob assembly with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This diffuser directs and evens airflow inside the appliance to promote consistent temperature and efficient operation. Replaces a damaged or broken diffuser to restore proper air distribution and reduce airflow noise. What it does:

• Guides cool or warm air from the blower/vent to improve circulation and temperature consistency
• Helps prevent hot or cold spots by evenly dispersing incoming airflow
• Replaces cracked, warped, or missing diffusers that can cause reduced airflow or noise
• Common symptom fixer: uneven cooling, fluctuating temperatures, or rattling/whistling near the vent

• Disconnect power to the appliance before beginning any repair
• Typically installs at the vent or blower outlet; common fasteners are clips or screws — keep hardware if replacing only the diffuser
• Handle plastic parts gently to avoid cracking; align tabs/slots before fastening

The Pressure Sensor Switch is an OEM part for Frigidaire washing machines. It is a component located near the pulsator that monitors water pressure within the washer tub during active cycles. The pressure sensor switch detects water pressure levels and transmits that input to the control board so it can regulate operation accordingly.

Causes for failure of the pressure sensor switch tend to be wear over time, accumulation of minerals/debris that impede functionality, or damage from unexpected water pressure rises. As a safety mechanism, this switch helps prevent overflow or other water-related issues by monitoring pressure inside the tub.

Symptoms of a bad pressure sensor switch include:

• Inability to advance to specific cycles like agitation or spin
• Error codes indicating pressure issues
• Cycles not completing properly or automatically stopping prematurely

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

This electronic control is the appliance's main control board that manages cycle settings, timers, and user commands, restoring responsive controls and normal operation when the original board fails. What it does:

• Replaces a failed or unresponsive control board to restore electronic control of cycles and functions
• Fixes symptoms such as no display, unresponsive buttons, or intermittent operation
• Helps clear incorrect or stuck cycle selections caused by a faulty controller
• Works as the centralized interface between user inputs and appliance components

• One electronic control board

• Disconnect power to the appliance before beginning any repair to avoid electrical shock
• Handle the board carefully to avoid static damage; ground yourself or use an anti-static strap
• Note and document connector locations before removal; match connectors exactly during reinstallation
• Some models require reprogramming or diagnostic steps after replacement—refer to the service manual or tech sheet for model-specific instructions

This wiring harness assembly connects electrical components to restore proper power and signal routing in your appliance. It replaces a damaged or worn harness to help eliminate intermittent power, control failures, or non-functioning components. What it does:

• Routes power and control signals between major components and the control board
• Replaces frayed, burned, or broken wires that can cause intermittent operation
• Helps resolve symptoms like no power to components, unresponsive controls, or erratic function
• Restores secure plug-and-play connections when factory connectors are damaged

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove panels as needed to access routing; avoid pinching or crimping wires during installation
• Match connectors and routing to the original harness; secure straps/clips to prevent chafing

This console assembly replaces the oven/range control console to restore the front control area's appearance and button/function access. It provides the mounting surface and user interface area for the range's control components. What it does:

• Replaces a cracked, loose, or damaged control console to restore a secure front control surface
• Provides the bezel and mounting points for control buttons, switches, and the user interface
• Helps resolve issues with broken or missing buttons, cosmetic damage, or a warped console panel
• Supports proper alignment of control components so buttons and displays operate correctly

• 1 console assembly

• Requires basic disassembly of the cooktop/control panel
• Disconnect power at the breaker before beginning any repair to avoid shock
• Handle with care to avoid scratching the finish or damaging attached components
• If the console carries electronic controls or the display, electrical connectors are seated and undamaged during reassembly

The Detergent Dispenser Handle Assembly is an OEM component for Frigidaire front-loading washing machines. As the user access point to the detergent drawer, this assembly incorporates the pull tab handle and internal latching mechanisms. 

Causes of failure could include broken or cracked plastic components from repeated opening and closing of the drawer over time, as well as worn gears and rollers failing to securely close and latch the drawer. Mineral buildup may also cause jams or obstructed motion.

Symptoms consist of:

• Loose, detached, or missing pull tab handle  
• Inability to fully open or properly close the detergent drawer
• Premature detergent leaks or spills from around the drawer
• Soap residue or unused detergent remaining in the drawer  

This OEM Frigidaire replacement is compatible with select Frigidaire, Electrolux, Gibson, Kelvinator, and some Kenmore brand models.

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

A replacement mounting screw used to secure components and panels in compatible appliances. Restores proper fit and prevents loose parts that can cause noise or improper alignment. What it does

• Fastens panels, brackets or small components to the appliance chassis
• Replaces missing or stripped screws that allow parts to shift or rattle
• Helps restore secure fit to reduce vibration and noise
• Maintains correct alignment of mounted components

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Install by hand first, then snug; do not over-tighten to prevent damage
• If threads are damaged, replace with the exact OEM screw to ensure proper fit

This clamp secures a hose to its fitting, maintaining a tight, leak-resistant seal at the connection. Replace a fatigued or missing clamp to help prevent drips and stop hoses from working loose under vibration.

• Holds a hose firmly on a pump, tub, dispenser, or valve outlet
• Maintains clamping force to help minimize leaks at the joint
• Helps keep hoses from slipping off during operation
• Common signs: water at a hose joint, loose/slipping hose, damaged or corroded clamp

• Disconnect power and shut off water supply before servicing
• Place a towel or pan to catch residual water at the connection
• Note hose position; remove the old clamp, seat hose fully on the fitting, position the new clamp over the bead, and secure
• After reassembly, run a short cycle and check for leaks

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This cable tie secures wiring and small hoses to appliance frames and harnesses, keeping components organized and reducing wear from rubbing or vibration. It helps maintain safe routing so wires stay clear of moving or hot parts. What it does:

• Fastens wire bundles, harnesses, and small hoses to prevent movement
• Keeps wiring routed away from sharp edges and heat sources
• Reduces noise and wear caused by loose or vibrating wires
• Helps prevent chafing that can lead to insulation damage or intermittent connections

• Disconnect power before servicing electrical components
• Position ties to secure harnesses without over-tightening; trim excess tail
• Keep ties away from high-heat surfaces and moving parts
• Replace any damaged or brittle ties rather than reusing

This is a dispenser inlet gasket intended for use on washing machines. This part ensures that the hot and cold water lines do not leak at the point where they are connected to the appliance. If the washing machine is leaking, the gasket may need to be replaced.Replacing a dispenser inlet gasket in a washing machine can be done easily. Screwdrivers and pliers are required. Disconnect the appliance before starting the repair. Wear work gloves for safety. The hot and cold water lines should both be turned off and removed to prevent flooding.This dispenser inlet gasket is an authentic OEM replacement part. It is sourced from the manufacturer. The replacement component is made of high-quality materials. It can be installed in several different models of washing machines. The dispenser inlet gasket is compatible with appliances produced by Frigidaire, Gibson, Electrolux, Westinghouse, and Kelvinator brands.

The Water Valve is an OEM part for Frigidaire washing machines. This part controls the entry of water into the washer during the wash and rinse cycles. 

Common causes of a bad valve include mineral deposits from hard water, electrical issues, or general wear and tear over time.

Symptoms of a bad washer water valve include:

• Washer not filling with water
• Slow water fill rate
• Leaking water from the valve area
• Inconsistent water temperature

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement hose routes water within your washer. Replacing a cracked, worn, or leaking hose restores a secure, watertight path so the machine can move water properly without puddles or performance issues.

• Transfers water between internal components during wash cycles
• Maintains a sealed flow path to help prevent leaks
• Damage may present as water on the floor, moisture under the unit, or related fill/drain errors
• Cracks, swelling, abrasion, or loose connections are common failure signs

• Unplug the washer and turn off water supply; have towels or a pan ready for residual water
• Note hose routing and clamp positions before removal; photos can help
• Transfer or replace clamps as needed; seat connections fully and secure firmly
• Run a test cycle and check all connections for leaks

This clamp secures flexible hoses and small-diameter tubing to fittings, helping prevent leaks and keeping connections tight for reliable appliance operation. Use it where a compact, durable clamp is required for water or drain lines. What it does:

• Holds hoses or tubes firmly to inlet/outlet fittings to reduce leaks
• Prevents hoses from slipping off during normal use or vibration
• Helps maintain proper fluid flow by keeping connections sealed
• Useful for water lines, drain hoses, and small appliance tubing

• One clamp

• Turn off and unplug the appliance and shut off water supply before starting
• Inspect the hose and fitting; replace any damaged hose before installing clamp
• Position clamp over the hose/fitting and tighten evenly for a snug fit without crushing the hose

The Housing is an OEM part for Frigidaire washers. It holds the dispenser cup securely in place and ensures proper functioning of the detergent and fabric softener dispensing system.

This housing is specifically designed to fit within your Frigidaire washer, providing stability and support to the dispenser cup. It helps prevent leaks and ensures that the detergent and fabric softener are dispensed accurately during the wash cycle.

A bad housing can be caused by wear and tear, damage, or improper installation. Signs of a faulty lower housing include leaks, loose dispenser cup, or improper dispensing of detergent or fabric softener.

Symptoms of a bad housing include:

• Leaks or drips from the dispenser
• Loose or wobbly dispenser
• Improper dispensing of detergent 

Replace your defective or damaged housing with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

The Dispenser Drawer Assembly is an OEM part for Frigidaire washing machines. It houses the mechanisms that dispense detergent and fabric softener into the wash drum at the appropriate times in each cycle. The dispenser drawer plays an important role in the automatic dosing of cleaning agents for optimized wash performance.  

Symptoms of a bad dispenser drawer include:

• Failure to dispense detergent or fabric softener 
• Dispenser drawer stuck open or closed
• Chemical leaks or exposure in the dispenser area  
• Electrical problems like buzzing or lights that won't illuminate
• Abnormal or incomplete cycle operation

Causes may include damage preventing proper opening/closing, worn dispenser components that malfunction, or electrical issues within the dispenser.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.
 

The Cup Assembly is an OEM part for Frigidaire washers. It is responsible for dispensing detergent, fabric softener, or bleach into the washing machine during the appropriate cycles. This dispenser cup is responsible for ensuring proper distribution of laundry products for effective cleaning and fabric care. It allows you to easily pour in the desired amount of detergent or additives.

Causes of a bad dispenser cup can include clogging, damage to the cup or its components, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad dispenser cup include:

• Improper dispensing of detergent 
• Residue or build-up in the dispenser 
• Leaks or drips from the dispenser area
• The dispenser door not opening or closing

Replace your damaged or malfunctioning dispenser cup with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This cable tie secures wiring and small hoses to appliance frames and harnesses, keeping components organized and reducing wear from rubbing or vibration. It helps maintain safe routing so wires stay clear of moving or hot parts. What it does:

• Fastens wire bundles, harnesses, and small hoses to prevent movement
• Keeps wiring routed away from sharp edges and heat sources
• Reduces noise and wear caused by loose or vibrating wires
• Helps prevent chafing that can lead to insulation damage or intermittent connections

• Disconnect power before servicing electrical components
• Position ties to secure harnesses without over-tightening; trim excess tail
• Keep ties away from high-heat surfaces and moving parts
• Replace any damaged or brittle ties rather than reusing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.