Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
Washer won't start or respond to buttons? This electronic control board assembly manages wash cycles and functions. Direct replacement restores control.
Replacement mounting bracket that secures panels, assemblies, or controls to your washer cabinet. Needed when original is cracked, broken, or missing.
Usually ships within 4 - 14 days
The Knob Assembly is an OEM part for Frigidaire washers. It consists of both the control board and knob for the user interface.
A bad board and knob assembly can be caused by electrical issues, component failure, or physical damage. When the assembly becomes faulty, it can result in issues such as the washer not starting, improper cycle selection, or unresponsive controls.
Symptoms of a bad board and knob assembly include:
Replace your faulty board and knob assembly with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Fix uneven drying or excess noise with this air flow diffuser. Directs airflow inside your dryer for consistent temperature and quieter operation.
Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
Fix a washer that won't start, respond to buttons, or advance cycles with this electronic control board. Restores full cycle operation and settings.
Fix intermittent power issues, control failures, or non-functioning components in your washer. This wiring harness assembly restores electrical connections.
Replace your washer's cracked or damaged control console to restore button function and front panel appearance. Moderate DIY repair in 30-60 minutes.
The Detergent Dispenser Handle Assembly is an OEM component for Frigidaire front-loading washing machines. As the user access point to the detergent drawer, this assembly incorporates the pull tab handle and internal latching mechanisms.
Causes of failure could include broken or cracked plastic components from repeated opening and closing of the drawer over time, as well as worn gears and rollers failing to securely close and latch the drawer. Mineral buildup may also cause jams or obstructed motion.
Symptoms consist of:
This OEM Frigidaire replacement is compatible with select Frigidaire, Electrolux, Gibson, Kelvinator, and some Kenmore brand models.
Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.
Replacement mounting screw that secures panels, brackets, and components to your washer chassis. Replaces missing, stripped, or damaged screws.
Replacement drain hose for front-load washers. Connects the pump to the drain outlet. Replace if cracked, kinked, leaking, or damaged to restore drainage.
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
Secures wiring and hoses to your laundry center frame. Replace if cracked, broken, or missing to keep wire bundles organized and protected from wear.
Seals hot and cold water connections to your washer's dispenser. Replace if you notice leaking at the inlet assembly. Confirm fit with your model number.
The Water Valve is an OEM part for Frigidaire washing machines. This part controls the entry of water into the washer during the wash and rinse cycles.
Common causes of a bad valve include mineral deposits from hard water, electrical issues, or general wear and tear over time.
Symptoms of a bad washer water valve include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Replaces cracked, worn, or leaking internal water hose in your washer. Restores watertight water flow between drum and dispenser components.
Secures hoses to fittings, preventing leaks in water and drain lines. Replace when connections loosen or leaks appear. Verify fit with your model number.
Replacement housing for washer detergent dispenser assembly. Installs in the top front panel. Order if your original housing is cracked, broken, or missing.
The Housing is an OEM part for Frigidaire washers. It holds the dispenser cup securely in place and ensures proper functioning of the detergent and fabric softener dispensing system.
This housing is specifically designed to fit within your Frigidaire washer, providing stability and support to the dispenser cup. It helps prevent leaks and ensures that the detergent and fabric softener are dispensed accurately during the wash cycle.
A bad housing can be caused by wear and tear, damage, or improper installation. Signs of a faulty lower housing include leaks, loose dispenser cup, or improper dispensing of detergent or fabric softener.
Symptoms of a bad housing include:
Replace your defective or damaged housing with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
Fix detergent not dispensing properly with this washer dispenser drawer assembly. Holds detergent and fabric softener for automatic dosing during cycles.
Fix detergent or fabric softener not dispensing properly with this washer dispenser cup assembly. Restores proper distribution of laundry products.
Mounting screw for washer cabinet and component assembly. Replace if screw is stripped, missing, or damaged during disassembly. Essential hardware piece.