Parts for Electrolux EFLS628WTT00: Control Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement mounting bracket that secures panels, assemblies, or controls to your washer cabinet. Needed when original is cracked, broken, or missing.

This is a light diffuser that covers the interior light bulb, spreading light evenly throughout the appliance cavity. It also serves as a reflector to maximize illumination. Replace this part if it is cracked, discolored, or melted, which can result in uneven or dim interior lighting.

Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

This is the handle assembly attached to the detergent dispenser drawer on the front of the washing machine. It allows you to pull the dispenser drawer open to add detergent, fabric softener, or bleach. Replace this handle if it is broken, cracked, or has snapped off, making it difficult to open the dispenser drawer.

Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

Replacement mounting screw that secures panels, brackets, and components to your washer chassis. Replaces missing, stripped, or damaged screws.

This is a flexible hose that connects the detergent or fabric softener dispenser to the wash tub, allowing dispensed products to flow into the drum during the wash cycle. If you notice detergent not dispensing properly, leaking near the dispenser area, or water pooling under the washer during the fill cycle, this hose may be cracked, clogged, or disconnected and needs replacement.

Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Secures wiring and hoses to your laundry center frame. Replace if cracked, broken, or missing to keep wire bundles organized and protected from wear.

Seals hot and cold water connections to your washer's dispenser. Replace if you notice leaking at the inlet assembly. Confirm fit with your model number.

The Water Valve is an OEM part for Frigidaire washing machines. This part controls the entry of water into the washer during the wash and rinse cycles. 

Common causes of a bad valve include mineral deposits from hard water, electrical issues, or general wear and tear over time.

Symptoms of a bad washer water valve include:

• Washer not filling with water
• Slow water fill rate
• Leaking water from the valve area
• Inconsistent water temperature

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replaces cracked, worn, or leaking internal water hose in your washer. Restores watertight water flow between drum and dispenser components.

Secures hoses to fittings, preventing leaks in water and drain lines. Replace when connections loosen or leaks appear. Verify fit with your model number.

Replacement housing for washer detergent dispenser assembly. Installs in the top front panel. Order if your original housing is cracked, broken, or missing.

The Housing is an OEM part for Frigidaire washers. It holds the dispenser cup securely in place and ensures proper functioning of the detergent and fabric softener dispensing system.

This housing is specifically designed to fit within your Frigidaire washer, providing stability and support to the dispenser cup. It helps prevent leaks and ensures that the detergent and fabric softener are dispensed accurately during the wash cycle.

A bad housing can be caused by wear and tear, damage, or improper installation. Signs of a faulty lower housing include leaks, loose dispenser cup, or improper dispensing of detergent or fabric softener.

Symptoms of a bad housing include:

• Leaks or drips from the dispenser
• Loose or wobbly dispenser
• Improper dispensing of detergent 

Replace your defective or damaged housing with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

Fix detergent not dispensing properly with this washer dispenser drawer assembly. Holds detergent and fabric softener for automatic dosing during cycles.

Fix detergent or fabric softener not dispensing properly with this washer dispenser cup assembly. Restores proper distribution of laundry products.

Mounting screw for washer cabinet and component assembly. Replace if screw is stripped, missing, or damaged during disassembly. Essential hardware piece.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.