Parts for Ge PGS908WEM1WW: 02 - Control Panel Parts

Color: White

Color: Black

This electronic oven control board governs oven heating and the front-panel display/timer. Replacing a failed control restores accurate temperature regulation, programming, and reliable operation of bake, broil, and timing features.

• Regulates bake and broil element operation based on user settings and sensor feedback
• Provides clock, timer, and temperature/status display
• Monitors oven temperature sensor and self-clean/lock circuits and may trigger fault beeps/codes
• Common symptoms: blank or erratic display, beeping with errors, unresponsive keys, oven won't start or maintain temperature

• Disconnect power at the breaker before servicing; verify no power is present
• Use ESD protection; handle the board by its edges and avoid touching components
• Photograph wire and ribbon-cable locations; transfer any trim/overlay and reinstall using existing hardware
• After reassembly, restore power, set the time, and test bake/broil functions

This keypanel support assembly mounts behind the user interface on your range or wall oven, holding the keypad in position and restoring a solid, factory fit so buttons align and the control area looks right again.

• Supports and aligns the keypad/touchpad behind the front control panel
• Provides a stable mounting frame for the user interface area
• Replaces cracked, warped, or broken supports that cause flexing or misaligned buttons
• Common symptoms include a loose control panel, sticking/misaligned keys, or keys that require extra pressure to respond

• Disconnect power at the breaker before servicing; this area contains live-voltage components
• Label/photograph wiring and ribbon connections to ensure correct reassembly
• Handle any ribbon cables by the connector ends; avoid creasing or contaminating contacts
• If your model uses separate trim or an overlay, carefully transfer those parts from the old assembly

This replacement faceplate covers and protects the SCR/control area on compatible GE cooking appliances, restoring a finished appearance while keeping control components secure. It's a direct-fit exterior trim piece for service and cosmetic repair. What it does:

• Covers and secures the SCR/control assembly to prevent exposure of components
• Helps keep grease, food debris, and accidental contact away from control parts
• Restores proper fit and appearance when the original faceplate is cracked, bent, or missing
• Can eliminate rattle or movement caused by a loose or damaged faceplate

• Disconnect power to the appliance before starting any service
• Use appropriate tools and keep hardware organized for reassembly
• Handle carefully to avoid scratching the finish or bending mounting tabs
• Inspect surrounding seals and wiring; replace or reposition as needed during reassembly

A replacement gasket faceplate that seals the appliance faceplate to help keep out moisture, dust and debris while restoring a snug fit and reducing rattling. Fits select GE appliances as the factory-style replacement. What it does:

• Seals the faceplate to the cabinet, helping prevent drafts and moisture intrusion.
• Replaces worn, cracked or deformed gaskets that cause visible gaps or uneven fit.
• Helps reduce faceplate movement and rattling during operation.
• Use when you see splits, compression set, or persistent gaps around the faceplate.

• Disconnect power to the appliance and remove any panels necessary to access the gasket.
• Carefully remove the old gasket and clean the mating surfaces of adhesive, dirt and debris.
• Align the new gasket in the mounting channel and press into place; replace any damaged clips or fasteners.
• Follow the appliance service manual for model-specific steps.

This control panel gasket seals the appliance console to help keep moisture, grease, and debris out of the control area and maintain a tidy, responsive panel. It replaces worn or damaged seals that let contaminants reach electronics. What it does:

• Creates a protective seal around the control panel to reduce moisture and grime intrusion
• Helps prevent dirt and cooking residue from collecting under buttons and behind the console
• Reduces the chance of control panel corrosion and intermittent button response caused by contamination
• Restores a flush fit and finished appearance to the console area

• Disconnect power to the appliance before starting any repair to avoid shock or unexpected operation.
• Remove the control panel or console per the service manual to access the old gasket; follow OEM disassembly steps.
• Clean mating surfaces of old adhesive or debris before installing the new gasket for a secure fit.
• If adhesive is used, allow proper cure time and verify proper alignment before reassembly.

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

This 8-32 thread screw fastens panels and components in compatible appliances, restoring secure mounting and stopping rattles or loose parts. Use it to replace stripped or missing fasteners and maintain proper alignment of covers and assemblies. What it does

• Secures panels, control boards, brackets, and accessory parts to the appliance chassis
• Restores proper fastening when original screws are missing, damaged, or stripped
• Helps eliminate vibration noise and loose-fit symptoms
• Matches common 8-32 appliance thread standards for a direct replacement

• One 8-32 thread screw

• Disconnect power to the appliance before beginning work to avoid shock or injury
• Use the correct-size Phillips or hex driver to prevent cam-out and head damage
• Install by hand first to engage threads, then tighten snugly—do not overtighten to avoid stripping

Nickel

Black. 8-18 AB HXW 3/8

A replacement rubber grommet that cushions and seats components to reduce vibration and protect wiring or shafts from wear. Restores proper fit and helps reduce noise and abrasion from loose or rubbing parts. What it does:

• Cushions and isolates parts to reduce vibration and rattling
• Protects wiring, hoses or shafts from chafing and wear
• Holds components securely in place to prevent misalignment
• Helps maintain seals and proper component spacing

• Disconnect power before servicing the appliance.
• Remove any panels or components blocking access; replace the grommet in the same orientation.
• Inspect surrounding parts (wires, hoses, mounting posts) for wear and replace if damaged.
• Do not force or modify the grommet; use the correct size for proper fit.