Parts for Ge PHS925ST1SS: 01 - Control Panel Parts

This control trim and gasket assembly replaces the exterior trim and sealing gasket around the oven/range control panel to restore fit, finish, and a proper seal. It helps keep heat, grease and moisture away from the control area for reliable performance. What it does:

• Covers and secures the control panel edge for a finished appearance
• Provides a gasket seal to limit heat and moisture intrusion behind the control housing
• Helps reduce vibration or rattling by holding the trim tight to the cabinet
• Prevents grease and grime from collecting behind the control area, simplifying cleaning

• 1 control trim and gasket assembly

• Disconnect power to the appliance before starting any work
• Remove control panel fasteners or clips to access the trim; keep all screws for reassembly
• Handle trim and underlying components carefully to avoid scratching or bending

This is a user interface control board assembly for specific GE model ranges and is sold separately as an individual component. This control board serves as the central functioning unit for induction glass cooktop ovens. The broiler, oven, and cooktop are controlled from the mainboard through the user interface assembly. When vital oven functions stop working on induction ranges, such as baking, broiling, and burner control, it could indicate a malfunction in the control board. There may also be a burning or charring smell originating from the user interface area when the component faults suddenly rather than shorting over time. Use a voltage meter to ensure it's a control board issue rather than an issue with the cooktop or oven area. Always unplug the range from any electrical sources before beginning an installation. Open the oven door and find the screws beneath the control board that anchor it in place. Remove these screws, then find the screws on the sides of the control assembly along the outer perimeter of the oven. Remove these, and the control assembly should pop right off. Disconnect from the wiring setup, and begin installing the new component. Always test before replacing any screws in case other measures need to be taken to repair the unit.This is a genuine OEM part sourced directly from the manufacturer. This part is compatible with GE appliances.

This filter clock display is the replacement display assembly that shows the refrigerator clock and filter status indicators, helping you know when a water filter needs changing and restoring normal display function. What it does:

• Shows the refrigerator clock and elapsed time indicator for the water filter
• Displays filter status prompts so you can tell when a replacement is due
• Restores a blank, faded, or unresponsive filter/clock display
• Helps reset or update the filter life indicator when paired with proper reset steps

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Handle the display assembly carefully to avoid scratching or damaging the lens or contacts.
• Small tools may be required to remove the control panel; keep track of screws and retainers.
• Follow model-specific disassembly and reassembly instructions.

Replacement screw that secures panels, trim and internal brackets to keep appliance components stable and rattle-free. Use when originals are missing, stripped, or broken to restore proper fit and safe operation. What it does:

• Secures panels, control housings, trim and small brackets so parts stay aligned and stable.
• Replaces missing or damaged fasteners that cause rattling, vibration, or loose assemblies.
• Keeps electrical and mechanical components properly positioned for reliable operation.
• Intended as a direct replacement where the OEM screw specified for the application is required.

• Disconnect power and unplug the appliance before starting any repair.
• Use the correct screwdriver or bit and seat the screw squarely to avoid stripping the head or threads.
• Do not overtighten—stop when snug to prevent damage to panels or plastic components.
• Keep removed screws organized; replace only with the identical OEM screw for proper fit.

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

• Loose or wobbly parts or panels within the appliance's interior or exterior
• Panels or components falling out of place, creating gaps or exposing internal parts
• Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This lubricant/cleaner is used during service of cooking appliances to dissolve residue and provide light lubrication on small moving parts. It helps restore smoother operation of control shafts and valves when burner knobs feel stiff or sticky. What it does:

• Cleans deposits and old grease from control shafts and valve components
• Provides light lubrication to reduce friction and sticking
• Helps address symptoms such as hard-to-turn burner knobs or rough valve rotation
• Supports preventative maintenance during range/cooktop service

• Lubricant/cleaner

• Disconnect power and shut off gas; allow the appliance to cool before servicing
• Work in a well-ventilated area and keep away from open flames or ignition sources
• Apply sparingly per service instructions; avoid contact with igniters, electrical components, and flame ports
• Replace any worn or leaking valve—do not rely on lubricant/cleaner to correct a leak

Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.

To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.