Parts for Ge ZET2PM3SS: 01 - Control Panel Parts

Control panel touch pad for your oven. Installs on the front console to operate cooking functions. Replace if cracked, unresponsive, or worn.

The Display Control Board is an OEM component specifically designed for GE electric ovens. This control board oversees the oven's electronic display interface and touch controls.

Causes of a bad control board can include moisture damage, ex

An encoder assembly mode is a feature included in wall ovens produced by several manufacturers. The purpose of this component is to assist with the signals sent to the control panel for various operations within the oven. Damages to the machine, misuse, or normal wear and tear can lead the encoder assembly mode to quit working. If it no longer is working, a replacement part is required.If an oven isn't responding correctly to the settings input into the control board, the encoder assembly mode could be the problem. Replacing the part is a simple repair. Always disconnect the appliance before starting the disassembly process. Wear gloves to protect hands. The component is located inside the control panel of the oven. The control panel must be taken apart to gain access to this part. Reconnect all wires securely before testing.This encoder assembly mode is an authentic OEM replacement part. It is sold as an individual unit. The encoder assembly mode component is made of high-quality, durable materials. The replacement part is compatible with several different models of ovens. It can be installed in appliances manufactured by General Electric, Hotpoint, and RCA.

Control panel bushing cushions and supports your oven's control panel, preventing wear where it contacts the cabinet. Replace if cracked, broken, or missing.

Metal control knob assembly for oven temperature and function selection. Replaces cracked, broken, or missing knobs that prevent proper control adjustment.

The Fan Kit is an OEM part for GE ovens and ranges. This part regulates the internal temperatures and preventing overheating.

Causes of a bad Fan Kit can stem from motor failure due to wear and tear, obstructions or debris blocking proper airfl

Stainless steel timer knob for your oven control panel. Replaces cracked, broken, or missing knobs to restore function and appearance of your appliance.

This bimetal limit switch monitors a radiant surface element's temperature and opens the circuit if it overheats, helping your cooktop maintain safe, consistent heating while protecting wiring and controls from damage. What it does:

• Senses surfa

Fix oven overheating or F9 error codes with a thermal limit switch replacement. This safety shutoff prevents damage when temperature exceeds safe limits.

Inner vent trim piece for wall ovens. Installs around the interior ventilation area to provide a finished look. Replace if cracked, discolored, or missing.

This oven exhaust duct channels hot air and cooking fumes out of the oven cavity to the range venting system, helping maintain proper oven temperature and reduce smoke or odors. Replace a damaged or corroded duct to restore correct venting. What it does:

• Directs hot air and combustion/steam fumes from the oven cavity into the vent ductwork
• Helps maintain consistent oven temperature by providing a clear exhaust path
• Can reduce smoke, burning smells, or poor broil performance when functioning properly
• Prevents loose metal or debris from obstructing the vent path

• One oven exhaust duct

• Disconnect power to the range (and gas supply if applicable) before beginning work
• Access typically requires removing the oven back panel or range back; keep fasteners for reinstallation
• Watch for sharp sheet-metal edges and wear gloves and eye protection
• Reinstall panels and secure all fasteners; test oven operation and venting after replacement

Standoff bumper for ranges, ovens, and cooktops. Installs to provide spacing and support between components. Replace if cracked, broken, or missing.

Fix an oven that won't turn off or won't maintain temperature. This relay board controls power to bake and broil elements. Moderate DIY repair.

Replacement mounting screw for refrigerators. Secures brackets, panels, handles, and covers. Replace lost, stripped, or damaged screws to restore stability.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

Mounting screw secures range components and panels. Replace if screw is stripped, missing, or damaged during appliance repair or maintenance work.

Black. 8-18 AB HXW 3/8

This encoder is the motor speed sensor used on many front-load and top-load washing machines to monitor drum/motor rotation and help control cycle speed and direction. Replacing a faulty encoder restores accurate speed feedback for reliable operation. What it does

• Detects motor/drum rotation and sends speed signals to the washer control board
• Helps the control board regulate spin and agitation speeds
• Commonly associated with symptoms like no spin, no agitation, erratic cycle behavior, or drive-related error codes
• Works as part of the drive/motor control system; proper alignment and secure connection are required for correct readings

• Disconnect power before accessing the washer motor or control wiring to avoid shock or injury
• Handle the encoder and wiring harness carefully; avoid pulling on wires or bending terminals
• Verify connector seating and secure mounting to ensure accurate sensor readings
• After installation, run a diagnostic or test cycle to confirm normal spin/agitation operation

This nut secures the control panel encoder shaft so the selector knob stays firmly in place and maintains reliable signal contact. A small but essential fastener for stable user control and consistent cycle selection. What it does:

• Secures the encoder/shaft to the control panel assembly to prevent wobble or loosening
• Helps keep the encoder's electrical contact aligned for accurate signal input
• Can resolve symptoms like a loose or spinning selector knob or intermittent control responses
• Designed for direct replacement of the original mounting nut for the encoder

• One nut encoder (quantity: 1)

• High-level task: remove control panel or console to access the encoder shaft; reassemble panels after replacement
• Use proper tools to avoid stripping the nut or damaging the encoder shaft
• Power off and unplug the appliance before beginning any work to avoid shock or damage

Lubricant cleaner for range and oven control shafts, burner valves, and rack paddles. Dissolves residue and restores smooth operation when parts feel stiff.