Parts for Ge CTD90FP4M1W2: Control Panel Parts

This control panel support bracket secures the console/upper control assembly to the oven/range frame, keeping the control panel stable and aligned for reliable operation and user access. What it does:

• Supports and stabilizes the front control/console to prevent sagging or wobble
• Keeps control switches, buttons and display aligned for correct operation
• Reduces vibration and rattling noise from a loose console
• Helps maintain proper spacing so knobs and trim install correctly

• One control panel support bracket

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove backguard/console trim to access bracket; retain all fasteners for reassembly
• Use common hand tools (screwdrivers, nut drivers); avoid forcing plastic tabs
• Handle electronic components with care and avoid static discharge

Can't control your cooktop remotely or losing WiFi connectivity? This WiFi module kit restores smart control features. Moderate difficulty installation.

Outer mounting enclosure that secures and protects the transceiver assembly in your range. Replace if cracked, broken, or damaged to restore proper fit.

If your oven's knob doesn't respond or settings won't change, this user interface board translates knob inputs to the control system. Direct fix.

Fix a broken or missing control knob that won't turn or select settings. This selector knob restores reliable heat and timer selection on your control panel.

Display not working or buttons unresponsive? This control board assembly restores your wall oven's touchpad and screen. Moderate DIY repair in 1-2 hours.

This knob timer assembly replaces a worn or broken oven timer knob so you can set and adjust cooking time and oven functions reliably. It restores manual timer control and a finished look to the oven control panel. What it does:

• Provides a functional timer knob for setting cook time and manual timer controls
• Replaces cracked, stripped, or non-moving knobs that won't turn or engage the timer
• Helps restore proper user interface when the original timer knob is loose or missing
• Fits into the oven control fascia and mates with the timer/control shaft to transmit user input

• 1 knob timer assembly

• Requires basic hand tools; remove power to the appliance before starting
• Pull or remove the old knob/assembly from the control shaft; press the new assembly onto the shaft until secure
• Do not force parts; if resistance or misalignment occurs, stop to avoid damage

Plastic frame board for wall ovens. Replaces cracked, broken, or worn frame components. Essential structural part for proper oven assembly and support.

Fix F96 error code or loud fan noise in your wall oven with this cooling fan blower motor. Moderately difficult repair requiring oven removal.

Replaces cracked or missing door bumpers on wall ovens. Cushions door closure and prevents damage. Essential when original bumper is worn or broken.

Control panel trim cracked or loose? This switch plate assembly secures control switches and knobs while protecting wiring. Straightforward install.

Replace your range's door latch access cover if the oven door won't latch properly or the latch mechanism is exposed. Simple repair restores door function.

Fixes loose power connections and electrical arcing in ranges and ovens. This terminal block secures incoming wiring for safe, reliable operation.

Upper air vent channel for wall ovens. Directs airflow in the vent system. Replace if cracked, broken, or missing to restore proper ventilation.

Upper fan mount bracket for wall ovens and ranges. Secures the cooling fan assembly in place. Replace if bracket is bent, broken, or missing.

Convection fan won't run or oven bakes unevenly? This wall oven fan motor circulates hot air for even cooking. Moderate DIY repair, 1-2 hours.

Fix F96 or F97 error codes with this cooling fan sensor board. Controls convection fan speed based on oven temperature. Moderate DIY, 30-60 min.

Flexible 6 ft conduit protects and organizes electrical wiring between wall oven components. Replace if conduit is cracked, damaged, or missing.

Fix oven not heating, electrical failures, or control issues with this main wire harness. Connects key electrical components in electric wall ovens.

Fix oven door latch issues with this wire harness connector. Repairs door lock failures and control communication problems. Standard difficulty repair.

Wire harness connects glass touch control panel to your wall oven's main control board. Replace if wiring is damaged, frayed, or connection is loose.

Replacement mounting screw for electric ranges, ovens, and wall ovens. Secures panels, brackets, and components. Replace if stripped, missing, or broken.

Replacement mounting screw for ranges and ovens. Secures panels, brackets, and internal components. Order when original screw is missing, stripped, or lost.

Silicon controlled rectifier for appliances. Switches and regulates power to heating or motor circuits. Replace if cracked, damaged, or failing to control.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

A small machine screw used to fasten appliance panels and components. This 10-32 x 7/16 screw secures assemblies and replacement parts so panels and brackets stay properly mounted during normal operation. What it does:

• Fastens small panels, brackets, and assemblies that use a 10-32 thread
• Replaces missing or stripped mounting screws to stop rattling and loose parts
• Helps maintain proper alignment of fitted components
• Used where a short 7/16" length is required for a flush fit

• Unplug the appliance before starting any repair
• Use the correct sized screwdriver or nut driver for 10-32 threads
• Hand-start the screw to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, replace with correct fastener; avoid forcing the screw

Black hex washer screw for securing range components like door trim, control panels, and internal brackets. Replace missing or stripped screws during repairs.

A replacement hex nut used to secure appliance components and restore proper fastening. Installs quickly and helps stop loose or rattling parts caused by a missing or stripped nut. What it does

• Secures mounting studs, brackets, or components in place
• Prevents parts from shifting, vibrating, or coming loose during operation
• Replaces a missing, damaged, or corroded nut to restore reliable fastening

• One hex nut

• Disconnect power and gas before starting work
• Start threads by hand to avoid cross-threading, then tighten with the proper-size wrench
• Do not overtighten; snug until secure to avoid damaging studs or threads
• Use replacement only where the OEM hex nut is specified

Lubricant cleaner for range and oven control shafts, burner valves, and rack paddles. Dissolves residue and restores smooth operation when parts feel stiff.

Replacement mounting screw for electric wall ovens. Secures oven components and panels. Order this part if your original screw is stripped, missing, or damaged.