Parts for Kitchenaid KODC304EBL01: Control Panel Parts

This control panel is the appliance's front console that houses the user controls and display, restoring reliable program selection and readable status feedback for the appliance. It replaces a cracked, unresponsive, or worn console surface. What it does:

• Provides the push-buttons/touch interface and display area for selecting cycles and settings
• Relays user inputs to the machine's control electronics so cycles start and respond correctly
• Restores clear labeling and tactile feedback when buttons are faded, stuck, or non-responsive
• Helps resolve symptoms such as buttons not responding, blank or unreadable display, or intermittent control behavior

• Disconnect power (and gas if applicable) before starting any repair to avoid shock or injury
• Follow OEM service instructions and retain any clips, brackets, or screws during removal
• Minor disassembly may be required to access mounting studs and electrical connectors

This replacement control panel restores the appliance's user interface so you can select cycles, start and stop operations, and view status indicators. It provides a direct swap for a damaged or unresponsive front console. What it does:

• Houses the push-buttons/touch controls and status LEDs or display used to operate the appliance
• Sends user commands to the control electronics so cycles and options run as selected
• Common fix for unresponsive buttons, missing or cracked face, and control-display errors
• Helps restore normal control operation when the original panel is physically damaged

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the panel and any attached ribbon/wiring carefully to avoid damage
• Installation typically requires removing the console or front trim; keep fasteners organized

This control panel is the user-facing console assembly that holds the touchpads, display, and main controls so you can operate the oven or range. It restores normal control access and readable display feedback. What it does

• Houses the control buttons/touchpads and display used to set bake, broil, timers, and other functions
• Replaces a cracked, faded, or unresponsive console surface or damaged button area
• Commonly used when buttons or touch controls fail to register, display is dim/blank, or settings won't accept
• Works with the range/oven's electronic control to send user commands for cooking functions

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the display and touchpad area carefully to avoid scratching or damaging the finish
• Some installations require removing the oven/range backguard or control housing and unplugging a ribbon or wire harness

This is a replacement oven control board from Whirlpool. The control board's job is to take user inputs, display information, and monitor/manage the function of the oven. The display shows the user the time and/or temperature, as well as timer-related information. Over time, the oven control board can deteriorate due to the effects of heat, moisture, spills, and more. Signs that the oven control board might be failing or have failed include intermitting problems with the display or oven functions, or lack of functionality. Replacing the control board is the only way to fix the problem. First, unplug the oven. Next, remove the cowling/cover over the control board. Locate the four mounting screws and remove them. Disconnect the wiring from the old board. Install the new board by following these steps in reverse.This is a genuine OEM part. It's sold individually, and will fit Whirlpool, KitchenAid, and Maytag ovens.

This membrane switch touch pad is the user-facing keypad that lets you send commands to your appliance's control board. Replacing a worn or unresponsive pad restores reliable button response and normal control operation. What it does:

• Registers user touch inputs and relays commands to the control board
• Replaces faded, cracked, or non-responsive buttons that cause missed inputs
• Helps resolve intermittent or no-response control panel behavior
• Works with the existing control housing and electronics to restore normal operation

• One membrane switch touch pad

• Disconnect power to the appliance before attempting service to avoid shock or damage
• Handle the thin membrane carefully to avoid creasing or damaging contact areas
• Align and seat connectors fully before testing

The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.

Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening. 

Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.

Symptoms of a bad screw include:

• Loose or wobbly components
• Misalignment of parts
• Noise due to vibrating or loose parts
• Difficulty in securing or removing the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This safety thermal fuse protects your appliance by opening the circuit if internal temperatures climb too high, helping prevent overheating damage and restoring safe operation when replaced.

• Monitors temperature and cuts power if an overheat condition occurs
• Common failure symptoms: appliance won't start, no power to key components, intermittent shutoff after heating, or blown/failed continuity on the fuse
• Helps safeguard wiring and control components from heat-related failures

• Disconnect power and shut off utilities before servicing
• Access location; note wire orientation for reassembly
• Replace if open/no continuity
• Investigate and correct the root cause of overheating (vents, fans, wiring) before restoring power

This mounting bracket is a replacement support bracket that secures appliance components and keeps assemblies aligned for reliable operation. It restores proper fit and helps prevent rattling or movement from loose fittings. What it does:

• Secures panels or assemblies to the appliance frame to maintain proper alignment
• Reduces vibration and rattling caused by loose or damaged supports
• Restores mounting points that prevent sagging or separation of connected parts
• Helps ensure stable operation after repairs involving removed or replaced hardware

• Follow the appliance service manual for exact location and fastener torque
• Disconnect power (and gas if applicable) before beginning any repair
• Use appropriate tools and replace any damaged screws or clips with OEM-equivalent fasteners