Parts for Viking Range VGSS36: Control / Rack Assembly Parts

Replace your oven indicator light when it fails, flickers, or stays on. Restores clear operation status on your control panel. Verify fit with your model.

This control panel is the front console assembly that houses the oven and cooktop controls and display, restoring the unit's user interface for selecting cook modes, temperatures, and timers. It replaces a cracked, worn, or non-working console. What it does

• Provides the buttons, touch controls and display used to operate the oven and burners
• Enables setting temperatures, cook modes, timers and other user commands
• Commonly replaced for unresponsive buttons, unreadable or cracked face, or damaged control housing
• Works with the unit's main control board to relay user input

• Disconnect power at the breaker before servicing to avoid shock
• Handle the panel and display components carefully to avoid cracking or scratching
• Take photos of wire locations before removal; reconnect all harnesses securely

The range knob bezel is the decorative ring that surrounds control knobs on your range's front panel. Replace this part when it becomes cracked, discolored, or loose, affecting the appearance and proper seating of control knobs.

Replace your oven indicator light when it fails, flickers, or stays on. Restores clear operation status on your control panel. Verify fit with your model.

Oven won't hold set temperature or heats incorrectly? The thermostat regulates oven heat. Moderate DIY repair taking under an hour with basic tools.

White burner control knob for gas range cooktops. Replaces cracked, broken, or missing knobs on your stovetop. Installs on the control panel.

White control knob for gas range surface burners. Replaces cracked, faded, or missing knobs to restore safe burner control and a clean, finished look.

This is a top burner knob that is used on oven ranges that were manufactured prior to 2003. A burner knob is what the user turns to adjust the temperature on the burner. This part is manufactured out of a black plastic material and has white lettering on it.A new top burner knob may be needed if the original is cracked, broken, or damaged in any way. If any of the letters wear off of the knob, the user may wish to replace it. If the back of the knob is stripped out and it just spins without activating the range, then it will need to be replaced.This top burner knob is a genuine Viking part and is an OEM part sourced directly from the manufacturer. It is sold individually. This particular top burner knob is compatible with oven ranges that are manufactured by the Viking brand.

Replace your gas range's worn, cracked, or missing thermostat control knob. This black knob installs on the front control panel to restore proper oven temperature adjustment.

Fix imprecise oven temperatures or a loose control knob with this thermostat knob replacement. Restores accurate heat selection on gas ranges. Simple DIY fix.

Replacement oven rack for gas ranges. Installs inside the oven cavity to support cookware. Order when your existing rack is bent, warped, or damaged.

This toggle switch kit replaces a worn or damaged control toggle to restore reliable on/off control for the affected function. It's a direct-fit replacement designed to match the original switch's form and mounting. What it does

• Replaces a broken, loose, or non-responsive toggle switch that prevents proper control
• Restores reliable electrical contact and user control for the associated function
• Stops intermittent operation, arcing, or loss of control caused by a failed switch
• Useful when the toggle lever is bent, loose, or when internal contacts have failed

• Disconnect power (and gas if applicable) before beginning any service
• Access usually requires removing the control panel or console; keep track of screws and trim
• Verify electrical connections and orientation match the original before final assembly
• If wiring shows heat or corrosion damage, replace wiring

Broiler pan for gas ranges and wall ovens. Replaces cracked, warped, or missing pans. Installs in broiler compartment for high-heat cooking and roasting.

Floor-mount bracket that anchors your range to prevent tipping when the door is opened. Replace if broken, missing, or during new installation.

This 1/2" x 1/4" rubber bumper cushions contact points to reduce noise and prevent damage on appliance doors, drawers, and panels. It restores proper cushioning for smoother, quieter operation and helps maintain a snug fit. What it does:

• Absorbs shock where panels or doors meet to reduce rattling and clapping noises
• Prevents metal-to-metal contact that can cause chipping, scratching, or wear
• Helps doors and drawers close more evenly by restoring original spacing
• Commonly used where small, press-fit bumpers have worn, flattened, or fallen off

• One 1/2" x 1/4" rubber bumper

• Press-fit replacement; remove old bumper and press new bumper into the same hole until flush
• No special tools required; use a flat pick or small screwdriver to remove old bumper if needed
• Avoid installing on hot surfaces or near heating elements; let appliance cool before service
• Replace matching bumpers in the same area if others show wear for even performance

41-inch stainless steel flexible gas line for gas ranges. Replace if damaged, kinked, or during installation. Verify length and fitting size match your model.

70-inch stainless steel flexible gas supply tubing for gas ranges. Connects your range to the gas line. Replace if kinked, cracked, or damaged.

Clicking but not lighting? This spark ignitor wire assembly restores reliable ignition on gas cooktops. Moderate DIY repair in 30-45 minutes.

The Spark Module Wire is an OEM part for Viking ranges and cooktops. It is responsible for transmitting the electrical signal from the spark module to the burner igniters, enabling the burners to ignite when the control knob is turned on. This wire is crucial for the proper functioning of the ignition system, ensuring that the gas ignites quickly and efficiently.

Over time, the spark module wire can become worn or damaged due to heat exposure, accidental pinching during maintenance, or normal wear and tear. When the wire is compromised, it can lead to issues with the burner ignition process, affecting the overall performance of the appliance.

Symptoms of a bad spark module wire include:

• Burners not igniting or taking longer to ignite
• Intermittent sparking or no sparking at all
• Clicking sound without ignition

This OEM part is specifically designed for Viking appliances, ensuring compatibility and reliable performance.