Parts for Kenmore 721.62109200 (72162109200, 721 62109200): Controller Parts

Replacement owner's manual for your microwave. Provides operating instructions, care guidelines, and safety information if original was lost or damaged.

A Tap-Tite binding-head screw used to fasten appliance panels and components where a self-tapping metal thread is required. Replaces missing or damaged fasteners to restore secure assembly and reduce vibration or rattling. What it does:

• Creates its own mating thread in thin sheet metal for a secure hold without a nut.
• Holds panels, brackets, and trim in place to prevent looseness or movement.
• Commonly used where stripped, missing, or broken screws cause rattling, misalignment, or parts that won't stay attached.
• Compatible with standard screwdrivers or nut drivers sized to the binding-head.

• Disconnect power and unplug the appliance before working on it.
• Use the correct driver bit to avoid cam-out or head damage.
• Start straight and apply steady pressure; avoid overtightening to prevent stripping the formed threads.
• If the original hole is badly damaged, assess for repair or use of a larger fastener as needed.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

Mounting screw for microwave installation and panel assembly. Replace if stripped, missing, or damaged during maintenance. Essential hardware component.

Truss head tapping screw secures panels, brackets, and covers in appliances. Replaces missing or damaged fasteners to restore snug fit and alignment.

Replacement mounting screw for microwave installation and assembly. Use when original screws are lost, stripped, or damaged during service or relocation.

Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.

This electronic control panel is the front-facing user interface that operates your appliance's functions and settings. It restores button/touch control and display feedback so cycles and options can be selected reliably. What it does:

• Replaces a faulty or unresponsive control surface so buttons or touchpads register user input
• Restores display indicators and status lights used for cycle selection and diagnostics
• Helps stop intermittent or incorrect cycle starts caused by damaged controls
• Common symptom: buttons don't respond, display is blank or shows error codes tied to the control board/interface

• One control panel assembly

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the panel carefully to avoid scratching display surfaces or damaging ribbon connectors
• May require removal of the top or front console and disconnecting ribbon/screw fasteners; keep screws and connectors organized

Turntable stopped turning or making noise? This microwave motor rotates the glass tray for even heating. Easy DIY fix with basic tools in under an hour.

This canopy resistor regulates current to a range-hood or canopy fan circuit to help the blower run at the correct speeds. Replacing a failing resistor can restore proper fan speed control and stop intermittent operation. What it does:

• Controls electrical resistance in the canopy/blower circuit to help regulate fan speeds.
• Helps prevent the motor from running only on a single speed or from failing to start at selected speeds.
• Can cause symptoms such as inconsistent fan speeds, no response from speed controls, or occasional fan cutoff.
• Works with the hood's wiring and control switch to deliver the correct voltage to the fan motor.

• Disconnect power to the appliance before accessing the canopy or electrical connections.
• Inspect wiring and connectors for heat damage or corrosion; replace harness or terminals if damaged.

Fix a microwave that won't start or runs with the door open. This door interlock switch ensures safe operation by detecting when the door is fully closed.

Microwave not heating? The magnetron generates microwaves for cooking. Requires electrical expertise and discharge of high-voltage capacitor.

This replacement oven light bulb restores clear visibility inside the oven cavity. It brings back bright, reliable illumination so you can check doneness at a glance—using the door switch or light button—without opening the door or losing heat.

• Lights the oven cavity when the door opens or when the light button is pressed
• Helps you monitor cooking progress without interrupting cooking
• Typical symptoms: no light, intermittent flickering, dim light, or a blackened/broken bulb
• A failed bulb is the most common cause

• Disconnect power or switch off the circuit breaker; allow the oven to cool completely
• Remove the lens/cover per your model; unscrew or unclip the bulb from the socket
• Handle the new bulb by the base; avoid touching the glass on capsule/halogen styles
• Do not exceed the bulb type/wattage specified for your model; tighten gently and test operation

This thermostat controls refrigerator temperature to help maintain proper cooling and prevent spoilage. It replaces a failed or inaccurate temperature control to restore consistent operation. What it does:

• Senses internal temperature and signals the compressor to cycle on/off
• Helps keep food at steady, safe temperatures when functioning correctly
• Commonly replaces thermostats that cause warm temperatures or inconsistent cooling
• Works as a direct replacement when matching the OEM part number

• Always disconnect power to the appliance before servicing to avoid shock or injury
• Handle the sensor and terminals carefully; avoid bending or damaging components
• Basic hand tools are typically required; follow your model's service manual for exact instructions